1. Product Overview
The Max Power Bulldog Style Bluetooth Speaker, model MD568, is a portable audio device designed for versatile music playback. It features Bluetooth connectivity for wireless streaming, an integrated FM radio, and support for USB/micro SD card input. Its unique bulldog design makes it a distinctive audio accessory suitable for both indoor and outdoor use.
Image: Front view of the Max Power Bulldog Style Bluetooth Speaker, showcasing its unique design and red color.
2. What's in the Box
Upon unboxing your Max Power Bulldog Style Bluetooth Speaker, please ensure all the following components are present:
- Max Power Bulldog Style Bluetooth Speaker (MD568)
- Rechargeable Battery (pre-installed or separate)
- Type C Charger Cable
- Dog Collar (decorative accessory)
3. Setup Guide
3.1 Initial Charging
Before first use, fully charge the speaker. Connect the provided Type C charger cable to the speaker's charging port (Input: DC 5V) and the other end to a compatible USB power adapter (not included) or computer USB port. The charging indicator light will typically show red during charging and turn off or change color when fully charged.
3.2 Powering On/Off
Locate the On/Off switch, usually positioned at the rear of the speaker. Slide the switch to the "On" position to power on the device. You will hear an audible confirmation sound. To power off, slide the switch to the "Off" position.
Image: Rear view of the speaker, highlighting the On/Off switch, volume/mode controls, USB port, and DC 5V input.
4. Operating Instructions
4.1 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode. If not, press the Mode button (often combined with volume controls) to switch to Bluetooth. The speaker will typically emit a sound or a light will flash to indicate it's in pairing mode.
- On your mobile device (smartphone, tablet, laptop), navigate to the Bluetooth settings.
- Search for available devices. The speaker will appear as "MD568" or "Max Power Speaker".
- Select the speaker from the list to initiate pairing. Once connected, you will hear a confirmation sound from the speaker.
- You can now play audio from your device through the speaker.
4.2 FM Radio Operation
To use the FM radio function:
- Power on the speaker.
- Press the Mode button repeatedly until you hear the FM radio function activate.
- Use the volume/track skip buttons (often labeled +/-) to scan for radio stations. A long press typically initiates an automatic scan, while short presses change stations manually.
4.3 USB/Micro SD Playback
The speaker supports playback from USB drives and Micro SD cards.
- Insert a USB drive into the USB port or a Micro SD card into the designated slot.
- The speaker should automatically switch to USB/Micro SD mode and begin playing audio files. If not, press the Mode button to select the correct input.
- Use the volume/track skip buttons to control playback.
4.4 Volume Control
Adjust the volume using the dedicated volume buttons on the speaker, often integrated with the track skip buttons. A short press typically adjusts volume, while a long press skips tracks (depending on the mode).
Image: The speaker positioned to illustrate its clear and loud sound output.
5. Maintenance
5.1 Cleaning
To clean the speaker, use a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents as they may damage the finish. Avoid exposing the speaker to excessive moisture.
5.2 Battery Care
To prolong battery life, avoid fully discharging the speaker frequently. Recharge the battery when the low battery indicator is active. If storing the speaker for an extended period, charge it to approximately 50% every few months to prevent deep discharge.
5.3 Storage
Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from dust and moisture.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on. | Battery is depleted. | Connect the speaker to a power source using the Type C charger cable and allow it to charge for at least 30 minutes before attempting to power on again. |
| Cannot connect via Bluetooth. | Speaker is not in pairing mode or already connected to another device. Device's Bluetooth is off. Speaker is too far from the device. | Ensure the speaker is in Bluetooth pairing mode. Turn off Bluetooth on other nearby devices. Enable Bluetooth on your device. Move the speaker closer to your device (within 10 meters). Try forgetting the device on your phone and re-pairing. |
| No sound from speaker. | Volume is too low on speaker or connected device. Speaker is muted. Incorrect input mode selected. | Increase volume on both the speaker and your connected device. Ensure the speaker is not muted. Press the Mode button to cycle through input modes (Bluetooth, FM, USB/SD). |
| FM radio reception is poor. | Weak signal. Interference. | Relocate the speaker to an area with better signal reception. Extend any built-in antenna if available. |
7. Specifications
Image: A visual representation of the speaker's dimensions: approximately 13.8 inches (length) x 7 inches (width) x 12 inches (height).
| Feature | Detail |
|---|---|
| Model Name | MD568 |
| Brand | Max Power |
| Connectivity Technology | Bluetooth, USB |
| Wireless Communication Technology | Bluetooth |
| Special Feature | FM Radio, Stereo Pairing |
| Speaker Type | Tweeter |
| Speaker Maximum Output Power | 5 Watts |
| Audio Output Mode | Stereo |
| Product Dimensions | 17.2"D x 7"W x 11"H (Note: Image shows approx. 13.8"L x 7"W x 12"H) |
| Item Weight | 3.54 pounds |
| Power Source | Battery Powered |
| Battery Type | 1 Lithium Ion battery (included) |
| Input Voltage | 5 Volts (DC) |
| Material | Plastic |
| Color | Red (for this variant) |
| Is Waterproof | FALSE |
| Bluetooth Range | 10 Meters |
8. Warranty and Support
8.1 Warranty Information
This Max Power Bulldog Style Bluetooth Speaker comes with a Full Warranty. Please retain your proof of purchase for warranty claims. For specific details regarding warranty coverage, duration, and terms, refer to the warranty card included with your product or contact Max Power customer support.
8.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Max Power customer support. Contact information can typically be found on the product packaging, the official Max Power website, or through your retailer.
Please note: Specific contact details are not provided in this manual. Refer to your product packaging or the manufacturer's website for the most current support information.
