One For All WM5620 Premium Tilt TV Wall Mount Instruction Manual
Model: WM5620 | Brand: One For All
Introduction
This manual provides comprehensive instructions for the safe and correct installation, operation, and maintenance of your One For All WM5620 Premium Tilt TV Wall Mount. Please read this manual thoroughly before beginning installation and retain it for future reference. Proper installation is crucial for the safety and stability of your television.
Image: Front view of the One For All WM5620 Premium Tilt TV Wall Mount, showing the wall plate and TV brackets.
Important Safety Information
Read all instructions: Before installation, carefully read and understand all instructions. If you have any questions, contact customer support.
Weight Capacity: Do not exceed the maximum weight capacity of 176 lbs (80 kg). This mount is designed for TVs between 42 inches and 100 inches.
Wall Structure: Ensure the wall structure can safely support the combined weight of the mount and the television. Consult a qualified professional if unsure.
Tools: Use appropriate tools for installation. Wear safety glasses and other protective gear as needed.
Children: Keep children away from the installation area.
UL Listed: This product is UL listed, indicating compliance with safety standards.
Image: The UL Listed certification logo, indicating product safety compliance.
Package Contents
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, do not attempt to install the mount. Contact customer support for assistance.
Image: Product packaging for the One For All WM5620, illustrating the mount and key features.
Specifications
Model Number
WM5620
TV Screen Size Compatibility
42" to 100"
Maximum Weight Capacity
176 lbs (80 kg)
VESA Compatibility
100x100 to 600x400 mm
Tilt Angle
Up to 15°
Wall Clearance (Minimum)
1.18 inches (30 mm)
Product Dimensions
28.43 x 1.38 x 16.93 inches
Item Weight
8.18 pounds
Special Features
Lightweight, Easy Lock-and-Release, Anti-scratch padding, Adjustable centering system
VESA Compatible
176 lbs. Capacity
Tilt Up to 15°
Installation Instructions
Before you begin, ensure you have all necessary tools and have read the safety information. For detailed visual guidance, consider using the One For All Assistant app.
1. Pre-Installation Checks
Determine TV Weight and Size: Confirm your TV's weight is within 176 lbs and screen size is between 42" and 100".
Check VESA Pattern: Locate the mounting holes on the back of your TV and measure the horizontal and vertical distance (in mm) to determine the VESA pattern. Ensure it falls within 100x100 to 600x400 mm.
Identify Wall Type: This mount is designed for wood stud walls (up to 24-inch on-center studs) or solid concrete/brick walls. Do not install on drywall alone.
Gather Tools: You will need a drill, stud finder, level (one is included), measuring tape, pencil, and appropriate drill bits.
2. Mounting the Wall Plate
Mark Position: Determine the desired height for your TV. Hold the wall plate against the wall and use the included spirit level to ensure it is perfectly horizontal. Mark the drill holes with a pencil.
Drill Pilot Holes:
For wood studs: Drill pilot holes into the center of the studs at the marked locations.
For concrete/brick: Drill pilot holes and insert the appropriate wall anchors (included in hardware kit).
Secure Wall Plate: Attach the wall plate to the wall using the provided lag bolts and washers. Tighten securely, but do not overtighten.
Image: The wall plate component of the TV mount, ready for installation.
3. Attaching TV Brackets
Select Screws: Choose the correct diameter and length of screws from the hardware kit that fit your TV's VESA mounting holes. Use washers and spacers if necessary to ensure a snug fit without overtightening.
Attach Brackets: Securely attach the two TV brackets to the back of your television. Ensure they are oriented correctly (usually with the hooks facing downwards) and are evenly spaced. The anti-scratch padding on the brackets protects your TV.
Image: Close-up view of a TV bracket, showing the mounting holes and design.
4. Mounting TV to Wall Plate
Hook TV: With assistance, carefully lift the television and hook the TV brackets onto the top edge of the wall plate.
Secure TV: Gently lower the TV until the brackets fully engage with the wall plate. The easy lock-and-release feature will secure the TV in place. Pull the release cords to ensure the TV is properly seated and locked.
Adjust Centering: The mount features an adjustable centering system, allowing you to slide the TV horizontally on the wall plate for optimal positioning after it's mounted.
Operating Instructions
Adjusting TV Tilt
The One For All WM5620 mount allows for a tilt adjustment of up to 15 degrees. This feature helps reduce glare and optimize viewing angles.
Unlock Tilt (if applicable): Some tilt mechanisms may have a locking knob or lever. Loosen these if present.
Adjust Angle: Gently push the top or bottom of the TV to achieve the desired tilt angle. The mount is designed to hold the angle once set.
Lock Tilt (if applicable): If your mount has a locking mechanism, tighten it to secure the TV at the chosen tilt angle.
Image: Side view of a television mounted on the wall, demonstrating the tilt capability.
Image: Detailed view of the tilt mechanism on the TV wall mount bracket.
Removing the TV from the Mount
To remove the TV, pull the easy lock-and-release cords located at the bottom of the TV brackets. This will disengage the locking mechanism, allowing you to lift the TV off the wall plate. Always have assistance when removing the TV.
Maintenance
Regular Inspection: Periodically check all screws and connections to ensure they remain tight and secure.
Cleaning: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
Damage Check: If any part of the mount appears damaged or worn, discontinue use and contact customer support for replacement parts or advice.
Troubleshooting
Problem
Possible Cause
Solution
TV is not level
Wall plate not level during installation.
Remove TV, loosen wall plate screws, adjust with spirit level, re-tighten. Ensure wall plate is perfectly level before re-mounting TV.
TV feels unstable or loose
Mounting screws not fully tightened; incorrect VESA screws used; wall anchors not properly installed.
Carefully remove TV. Re-check all connections: wall plate to wall, brackets to TV. Ensure all screws are tightened securely. Verify correct VESA screws are used for your TV. If using wall anchors, ensure they are appropriate for your wall type and installed correctly.
TV does not tilt or hold position
Tilt mechanism is too loose or too tight; TV weight exceeds capacity.
Check if there are any tilt locking mechanisms that need to be adjusted. Ensure the TV weight is within the specified limit of 176 lbs. If the tilt mechanism is adjustable, tighten or loosen as needed to achieve desired friction.
Missing parts from hardware kit
Packaging error.
Do not proceed with installation. Contact One For All customer support immediately for replacement parts.
Warranty and Support
The One For All WM5620 Premium Tilt TV Wall Mount comes with a 10-year warranty, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For further assistance, troubleshooting, or to access detailed installation guides, please refer to the One For All Support Website or download the One For All Assistant app, available on major app stores. The app provides interactive installation help and product information.
Image: A mounted television with a "10 Year Guarantee" emblem, highlighting the product's warranty.
