Igloo 90-quart Maxcold Latitude Flip and Tow Wheeled Cooler Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Igloo 90-quart Maxcold Latitude Flip and Tow Wheeled Cooler. Please read these instructions carefully before initial use and retain for future reference.

Image 1: Angled view of the Igloo 90-quart Maxcold Latitude Flip and Tow Wheeled Cooler.

2. Important Safety Information

WARNING: Product Recall Information

Please be aware that the Igloo 90 Qt. Flip & Tow Rolling Coolers have been subject to a recall due to a potential safety hazard. The tow handle design can pinch users’ fingertips against the product, posing risks of amputation, bone fractures, or lacerations. For your safety, please exercise extreme caution when operating the tow handle. It is recommended to visit the official Igloo website or the U.S. Consumer Product Safety Commission (CPSC) website for the latest information regarding this recall and any recommended actions.

Always ensure the cooler is placed on a stable, level surface before opening or closing the lid. Keep hands and fingers clear of all moving parts, especially hinges and the tow handle mechanism, to prevent injury.

3. Product Features

The Igloo Maxcold Latitude Flip and Tow Wheeled Cooler is designed for extended cooling performance and ease of transport. Key features include:

• MaxCold 5-Day Performance: Advanced insulation throughout the body and lid for prolonged ice retention.
• Generous Capacity: 90-quart (85-liter) capacity, capable of holding approximately 144 cans.
• Quick Access Hatch: A smaller hatch on the lid allows for easy access to contents without opening the main lid, minimizing cold air loss.
• Integrated Cup Holders: Four self-draining cup holders are molded into the lid for convenience.
• Oversized Wheels: Robust, oversized wheels designed for all-terrain mobility, making transport easier over various surfaces.
• Flip & Tow Handle: A sturdy tow handle for convenient pulling. (Refer to Safety Information regarding handle use).
• Engineer-Grade Hinges: Durable hinges with a 'stay-open' detent feature to prevent accidental lid closure.
• Cool Riser Technology™: Elevated design to improve cooling performance by keeping the cooler away from hot surfaces.

Image 2: Cooler with lid open, showing the interior and quick access hatch.

4. Setup

Your Igloo cooler arrives ready for use with minimal setup required.

1. Unpacking: Carefully remove the cooler from its packaging. Inspect for any signs of damage during transit.
2. Initial Cleaning: Before first use, wipe the interior and exterior surfaces with a damp cloth and mild detergent. Rinse thoroughly and ensure the cooler is completely dry before storing or loading contents.
3. Pre-Chilling (Optional but Recommended): For optimal ice retention, pre-chill the cooler by placing a bag of ice or ice packs inside for several hours before loading your items.

5. Operating Instructions

5.1 Loading Contents

• For best results, load the cooler with pre-chilled food and beverages.
• Use block ice for longer retention or cubed ice for faster cooling. Fill any empty spaces with ice to maximize efficiency.
• Layer items, placing frequently accessed items near the top.

5.2 Using the Lid and Quick Access Hatch

• To open the main lid, unlatch the two front latches and lift. The engineer-grade hinges will hold the lid open.
• To close, lower the lid and secure both latches firmly.
• To use the quick access hatch, simply lift the small hatch located on the main lid. Close it securely after use to maintain temperature.

5.3 Transporting the Cooler

Image 3: Side view of the cooler with the tow handle extended for transport.

• To engage the tow handle, pull it upwards until it locks into position.
• Tilt the cooler and pull it using the handle. The oversized wheels are designed to navigate various terrains.
• To retract the handle, press the release button (if present) or push it down firmly until it is fully nested.
• Caution: Always keep hands and fingers clear of the handle mechanism when extending or retracting to avoid pinching. Refer to the Safety Information section.

6. Maintenance and Care

Proper care will extend the life and performance of your cooler.

• Cleaning: Wipe interior and exterior surfaces clean before storing and between uses.
• Stain and Odor Prevention: To prevent stains and odors, empty the cooler of all contents and liquids after each use.
• General Cleaning: Light dirt or stains can be cleaned with water or a mild detergent.
• Tougher Stains: For more stubborn stains, a diluted solution of baking soda and water may be used.
• Rinsing and Drying: Ensure all cleaning agents are thoroughly rinsed from the cooler. Allow the cooler to air dry completely with the lid slightly ajar before storage to prevent mold and mildew.
• Storage: Store the cooler in a cool, dry place away from direct sunlight.

7. Troubleshooting

If you encounter issues with your cooler, consider the following common solutions:

• Poor Ice Retention: Ensure the lid is securely latched. Check the lid gasket for any damage or debris that might prevent a tight seal. Pre-chill the cooler before loading. Minimize opening the lid.
• Difficulty with Wheels: Check for debris or obstructions around the wheels. Ensure the wheels are clean and free-moving.
• Handle Issues: If the tow handle is stiff or difficult to operate, ensure no debris is obstructing its mechanism. Apply a small amount of silicone lubricant if necessary, avoiding contact with food surfaces. Remember to exercise caution due to the recall information.

8. Specifications

9. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official Igloo website. You may also contact Igloo customer service directly for assistance with your Igloo 90-quart Maxcold Latitude Flip and Tow Wheeled Cooler.