onerbl AC/DC Adapter for Atron Vision AVF240 24" 144Hz Gaming Monitor Instruction Manual

1. Introduction and Overview

This manual provides essential instructions for the safe and effective use of your onerbl AC/DC Adapter, designed as a replacement power supply for the Atron Vision AVF240 24" 144Hz Gaming Monitor. This adapter delivers stable power to ensure optimal performance of your monitor.

Image 1.1: The onerbl AC/DC Adapter with its detachable power cord.

Key Features:

• Input Voltage: AC 100-240V, 50/60Hz (Worldwide compatible).
• Cable Length: Approximately 10 feet (3 meters) for flexible placement.
• Safety Protections: Includes over voltage protection and over heat protection.
• Condition: New, high-quality replacement unit.

Image 1.2: Illustration of the extended cord design, highlighting the 10 ft cable length for convenient use.

2. Setup Instructions

Follow these steps to correctly set up your onerbl AC/DC Adapter with your Atron Vision AVF240 monitor.

1. Unpack: Carefully remove the AC/DC adapter and power cord from its packaging.
2. Connect Power Cord: Insert the 2-pin end of the detachable power cord into the corresponding receptacle on the AC/DC adapter unit. Ensure it is firmly seated.
3. Connect to Monitor: Locate the power input port on your Atron Vision AVF240 monitor. Insert the barrel connector from the AC/DC adapter into this port.
4. Connect to Wall Outlet: Plug the 2-prong end of the power cord into a standard AC 100-240V wall outlet.
5. Verify Power: A blue LED indicator on the adapter unit will illuminate when power is supplied, indicating the adapter is functioning correctly.

Image 2.1: The onerbl AC/DC Adapter properly connected to a wall outlet and ready for use with a compatible device.

3. Operating Instructions

The onerbl AC/DC Adapter is designed for continuous operation. Once connected as per the setup instructions, it will provide power to your Atron Vision AVF240 monitor.

• Power Indicator: The blue LED on the adapter indicates that it is receiving power from the wall outlet and is ready to supply power to your monitor.
• Safe Usage: Ensure the adapter is placed in a well-ventilated area to prevent overheating. Do not cover the adapter during operation.
• Disconnection: To disconnect power, first unplug the adapter from the wall outlet, then disconnect the barrel connector from the monitor.

4. Maintenance

Proper maintenance ensures the longevity and safe operation of your AC/DC adapter.

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cables to prevent damage.
• Cable Inspection: Periodically inspect the power cord and adapter cables for any signs of damage, such as fraying, cuts, or bent pins. If damage is found, discontinue use and replace the adapter.

Image 4.1: Detail of the detachable power cord, emphasizing the importance of inspecting its condition.

Image 4.2: Illustration of the cable's internal structure, showing copper wire and a PVC jacket for durability and quality.

5. Troubleshooting

If you encounter issues with your onerbl AC/DC Adapter, refer to the following common problems and solutions.

• No Power to Monitor:
  • Ensure the adapter is securely plugged into a working wall outlet.
  • Verify that the detachable power cord is firmly connected to the adapter unit.
  • Check that the barrel connector is fully inserted into the monitor's power input.
  • Confirm the blue LED on the adapter is illuminated. If not, try a different wall outlet.
• Adapter Overheating:
  • Disconnect the adapter immediately.
  • Ensure the adapter is in a well-ventilated area and not covered.
  • Allow it to cool down before reconnecting. If overheating persists, discontinue use.
• Monitor Flickering or Unstable Power:
  • Ensure all connections are secure.
  • Verify that the monitor's power requirements match the adapter's output specifications.
  • The adapter features built-in protections against over voltage and over heat, which help maintain stable power delivery.

Image 5.1: The adapter's smart chip provides multiple protections, including short-circuit, over-voltage, and over-current, enhancing safety and reliability.

6. Specifications

Image 6.1: Detailed dimensions of the adapter unit and cable lengths for reference.

7. Warranty and Support

Specific warranty information for this onerbl AC/DC Adapter is not provided in the product details. For any warranty claims or technical support, please refer to the seller or manufacturer directly.

Manufacturer: Shenzhen Waweis Technology Co., Ltd

For further assistance, please contact the retailer from whom you purchased this product.