1. Introduction
This manual provides detailed instructions for the safe and effective use of your iDance STARPADS20 Beatmaker Pack. Please read this manual thoroughly before operating the device and retain it for future reference. The iDance STARPADS20 is a portable beatmaker and DJ system designed for creating and mixing music with its soundpads and accompanying Bluetooth soundbar.
2. Safety Information
- Do not expose the device to water or excessive moisture.
- Avoid extreme temperatures.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Use only specified power sources and accessories.
- Keep out of reach of small children.
3. Package Contents
The iDance STARPADS20 Beatmaker Pack includes:
- 1x STARPADS20 Beatmaker Unit
- 1x Bluetooth Soundbar (rechargeable)
- Necessary connection cables (e.g., USB charging cable, AUX cable)
Image: The iDance STARPADS20 Beatmaker Pack shown in its retail packaging, displaying both the beatmaker unit and the accompanying soundbar.
4. Product Overview
The STARPADS20 Beatmaker features 16 luminous soundpads, two beat players, and various controls for mixing. The included Bluetooth soundbar provides audio output and additional features like disco lighting and MP3 playback.
Image: The iDance STARPADS20 Beatmaker unit and its accompanying Bluetooth soundbar, ready for use.
Image: A detailed view of the iDance STARPADS20 Beatmaker's control panel, highlighting the soundpads, volume controls, beat player sections, and LED show button.
5. Setup
5.1 Powering On/Off
To power on the Beatmaker unit, insert 3 AAA batteries (not included) into the designated compartment. For the soundbar, ensure it is charged or connected to a power source. Long press the power button on both devices to turn them on or off.
5.2 Connecting the Soundbar
The soundbar can be connected to the Beatmaker unit or other audio sources via Bluetooth or AUX cable.
Bluetooth Connection:
- Ensure the soundbar is powered on and in Bluetooth pairing mode (indicated by a flashing BT light).
- On your mobile device or the Beatmaker unit, navigate to Bluetooth settings.
- Select the soundbar from the list of available devices (e.g., 'iDance Soundbar' or similar).
- Once paired, the BT light will become solid, indicating a successful connection.
AUX Connection:
Connect one end of a 3.5mm AUX cable to the AUX-in port on the soundbar and the other end to the audio output of your desired device (e.g., the Beatmaker unit's headphone output, or a smartphone).
Video: A demonstration of the product's features and functionality, including how to connect and interact with the device.
Video: Instructions on how to connect a mobile phone to a mixer, illustrating the general process for Bluetooth audio input.
6. Operating Instructions
6.1 Using the Soundpads
The Beatmaker unit features 16 soundpads. These pads are pre-loaded with 44 different sounds across various music styles including Rock Session, Groove Time, Vocoder, and Electronic Drums. Press the pads to trigger sounds and create your beats.
6.2 Beat Players (A & B)
Utilize the two beat players (A and B) to mix different loops and beats. Each player offers 4 music styles (Rock, House, Latin, Electronic Session for A; House, Dance, Rap, Jazz for B) with built-in loops for endless mixing possibilities.
6.3 Drop Mix Function
Engage the Drop Mix function to introduce 5 FL Studio Drop Mix audio loops, adding dynamic transitions to your mixes.
6.4 Disco Lighting
The soundpads and soundbar feature integrated LED disco lights. Activate the LED Show program to enjoy 4 different disco light patterns, enhancing your performance.
6.5 MP3 Player
The soundbar includes a USB/TF card MP3 player. Insert a USB drive or TF card with MP3 files to play your favorite tracks directly through the soundbar.
Image: A visual representation of the STARPADS20's key features, such as the beatmaker, DJ station, Bluetooth speaker, disco lighting, soundpads, drum pads, and LED show.
7. Maintenance
7.1 Cleaning
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device openings.
7.2 Storage
Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove batteries from the Beatmaker unit.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low or no battery power; incorrect battery insertion. | Replace AAA batteries in the Beatmaker unit. Charge the soundbar. Ensure batteries are inserted correctly. |
| No sound output | Volume too low; incorrect connection; device not paired (Bluetooth). | Increase volume on both the Beatmaker and soundbar. Check AUX cable connection. Re-pair Bluetooth devices. |
| Bluetooth pairing fails | Soundbar not in pairing mode; device too far; interference. | Ensure soundbar BT light is flashing. Move devices closer. Turn off other Bluetooth devices. |
9. Specifications
- Model Number: STARPADS20
- Brand: iDance
- Dimensions (L x W x H): 21 x 19 x 4 cm
- Weight: 850 Grams
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Connectivity: Bluetooth, AUX
- Audio Input: Bluetooth
- Power Source: Battery powered (Beatmaker: 3x AAA, Soundbar: Lithium-ion rechargeable)
- Impedance: 4 Ohms
- Special Features: 16 Soundpads with LED Disco, 44 sounds, 4 Disco LED programs, Rechargeable BT Soundbar, USB/TF Card MP3 Player
10. Warranty and Support
The iDance STARPADS20 Beatmaker Pack comes with a 2-year manufacturer's warranty. For technical support, warranty claims, or further assistance, please refer to the contact information provided on the product packaging or the official iDance website.
