1. Introduction
The COLORLIFE Electric Jellyfish Lamp is a versatile device combining a jellyfish aquarium, Bluetooth speaker, white noise machine, and night light. It is designed to provide a visually stunning and audibly soothing ambiance, complementing music and creating a relaxing environment. This manual provides essential information for the safe and effective use of your device.
2. Package Contents
Please verify that all items are present in your package:
- 1 x Jellyfish Lamp Unit
- 2 x Artificial Jellyfish
- 1 x USB Power Cable
- 1 x Remote Control
- 1 x User Manual
Figure 2.1: Exploded view of the jellyfish lamp components.
3. Setup Instructions
Follow these steps to set up your jellyfish lamp:
- Prepare the Tank: Carefully remove the lid from the top of the lamp unit.
- Fill with Water: Fill the tank with distilled water up to the indicated fill line. Ensure no air bubbles are trapped inside.
- Add Jellyfish: Place the artificial jellyfish into the water. If they float, gently push them down with a non-abrasive tool until they are fully submerged and filled with water. This may take a few minutes.
- Secure the Lid: Replace the lid firmly on the tank.
- Connect Power: Connect the USB power cable to the lamp unit and plug the other end into a compatible USB power adapter (5V/1A recommended) and then into a power outlet.
Figure 3.1: Filling the tank with water and adding jellyfish.
4. Operating Instructions
Your COLORLIFE Jellyfish Lamp can be operated using the buttons on the unit or the included remote control.
4.1. Basic Operation (Unit Buttons)
- Power Button: Press to turn the lamp ON/OFF.
- Light Button: Press to cycle through different light colors and modes.
4.2. Remote Control Functions
The remote control provides full access to all features:
Figure 4.1: Remote control layout and functions.
- Power (Red Button): Turns the lamp ON/OFF.
- Brightness Adjustment (Sun Icons): Adjusts the brightness of the lights.
- Light Colors (R, G, B, W, etc.): Selects static light colors.
- Light Modes (FLASH, STROBE, FADE, SMOOTH): Cycles through dynamic light effects.
- Bluetooth Mode (Music Note Icon): Activates Bluetooth pairing.
- White Noise Mode (Wave Icon): Activates the white noise function.
- Volume Control (VOL+, VOL-): Adjusts speaker volume.
- Track Control (Previous, Pause, Next): Controls music playback in Bluetooth mode.
- Timer (4H, 8H): Sets the lamp to automatically turn off after 4 or 8 hours.
4.3. Bluetooth Pairing
To connect your device via Bluetooth:
- Press the Bluetooth Mode button on the remote control.
- On your smartphone or audio device, enable Bluetooth and search for available devices.
- Select "COLORLIFE" from the list to pair. A confirmation sound will indicate successful pairing.
Figure 4.2: Bluetooth 5.3 connectivity for seamless audio streaming.
4.4. Water Flow Speed
The lamp features 3 different water flow speeds, which control the movement of the jellyfish. These can typically be adjusted via the remote control or by cycling through modes on the unit.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your jellyfish lamp.
- Water Replacement: It is recommended to replace the water every 2-3 months to maintain clarity and prevent algae buildup. Use distilled water only.
- Cleaning the Tank: Gently clean the inside of the tank with a soft cloth or sponge if residue appears. Do not use abrasive cleaners.
- Jellyfish Care: Handle artificial jellyfish carefully. If they become dirty, rinse them with clean water.
- Power Off Before Cleaning: Always unplug the device from the power source before performing any maintenance.
Figure 5.1: Internal motor responsible for water circulation and jellyfish movement.
6. Troubleshooting
If you encounter issues with your jellyfish lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Jellyfish not moving or sinking. | Air bubbles trapped in jellyfish or insufficient water flow. | Gently push jellyfish down to release air. Ensure tank is filled to the correct level. Check for obstructions in the water pump. |
| Lights not working. | Power connection issue or LED malfunction. | Check power cable connection and power outlet. Try a different USB adapter. If problem persists, contact support. |
| No sound from speaker. | Bluetooth not connected, volume too low, or speaker malfunction. | Ensure Bluetooth is paired correctly. Increase volume using the remote or connected device. |
| Water appears cloudy. | Contaminants in water or algae growth. | Replace water with distilled water. Clean the inside of the tank. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | BH-BTJ01 |
| Dimensions (D x W x H) | 4"D x 5"W x 12.5"H |
| Item Weight | 0.8 Pounds |
| Power Source | Corded Electric (USB) |
| Voltage | 5 Volts |
| Wattage | 5 Watts |
| Light Source Type | LED |
| Connectivity Technology | USB, Bluetooth 5.3 |
| Control Method | Remote, Push Button |
| Material Type | Acrylic |
| Water Resistance Level | Not Water Resistant |
8. Warranty Information
COLORLIFE offers a one-year warranty for this product, providing peace of mind regarding manufacturing defects and performance issues. Please retain your proof of purchase for warranty claims.
9. Support
For further assistance, troubleshooting not covered in this manual, or warranty claims, please contact COLORLIFE customer support through the retailer where the product was purchased or visit the official COLORLIFE website for contact information.