Sytong HT-60LRF Night Vision Rifle Scope User Manual

Introduction

The Sytong HT-60LRF is an advanced digital night vision rifle scope with an integrated laser range finder, designed for both daytime and nighttime observation and hunting. It seamlessly transitions between full-color daytime viewing and powerful night vision, and can also function as a standalone night vision monocular. This manual provides essential information for the proper setup, operation, and maintenance of your HT-60LRF device.

Safety Information

• Always handle firearms and optics responsibly and in accordance with all local laws and regulations.
• Ensure the device is powered off and disconnected from any power source before cleaning or performing maintenance.
• Do not look directly into the IR illuminator or laser range finder beam, as this may cause eye damage.
• Keep the device away from extreme temperatures and direct sunlight when not in use.
• Only use the specified charging voltage (below 5V) to prevent damage to the device.
• Remove the battery sticker before initial use.

Product Overview

The Sytong HT-60LRF combines a high-resolution digital sensor with an integrated laser range finder and IR illuminator for versatile performance.

Figure 1: Front-side view of the Sytong HT-60LRF Night Vision Rifle Scope, showcasing its compact design and integrated components.

Figure 2: Rear-side view of the Sytong HT-60LRF, highlighting the eyepiece and the laser range finder module.

Figure 3: Top view of the Sytong HT-60LRF, showing the main control buttons for power, menu, and IR illuminator.

Figure 4: Side view of the Sytong HT-60LRF, illustrating the battery compartment and additional mounting points.

Setup

1. Battery Installation and Charging

The HT-60LRF requires a battery for operation. Before first use, ensure you remove the protective sticker from the battery. Insert the battery into the designated compartment (refer to Figure 4). To charge the device, connect it to a 5V (Micro USB) power supply. WARNING: Do not charge the device with voltage over 5V, as this will cause damage.

2. Mounting

The Sytong HT-60LRF is designed for mounting on a Weaver rail. Securely attach the scope to your firearm using appropriate mounts. Ensure the scope is firmly seated and aligned for optimal performance and safety.

Operating Instructions

1. Power On/Off

Press and hold the power button (refer to Figure 3) to turn the device on or off. The OLED display will activate upon power-on.

2. Magnification Adjustment

The HT-60LRF offers magnification options of 3/8X and 6.5X/13X. Use the designated buttons (refer to Figure 3) to cycle through the available magnification levels. The device also supports 2X-4X digital zoom on Picture-in-Picture without losing details.

3. IR Illuminator

The built-in 940nm infrared (IR) illuminator provides enhanced visibility in low-light conditions. It features three intensity settings. Press the IR button (refer to Figure 3) to cycle through the intensity levels. The IR illuminator can be focused to optimize performance for various distances, up to 200 meters (656 feet).

4. Laser Range Finder (LRF)

The integrated laser range finder has an effective range of 5-1000 meters. Activate the LRF to measure distances to targets. It supports both single measurements and continuous scanning mode with an accuracy of +/- 1 meter. This feature is crucial for quick assessment of your target's environment.

5. Video/Photo Recording

The device can record videos in .AVI format and capture photos in .jpg format, both at 1920x1080 resolution with a frame rate of 30fps. Ensure a Class 10 TF card (max support 128G) is inserted for storage. Use the recording button (refer to Figure 3) to start and stop recording or capture images.

6. Wi-Fi Connectivity

The HT-60LRF supports 802.11 b/g Wi-Fi for connectivity with compatible devices. The default Wi-Fi password is 12345678. The line-of-sight reception range is approximately 15 meters.

7. Focusing

Adjust the focus of the scope for clear viewing. The focusing range is from 2cm to infinity. Rotate the focus ring on the objective lens until the image appears sharp.

8. Zeroing and Reticle Adjustment

The scope features a center position adjust function to ensure accuracy. Refer to the on-screen menu (accessed via the MENU/OK button, Figure 3) for reticle adjustment and zeroing procedures. Proper zeroing is essential for accurate shot placement.

Maintenance

1. Cleaning

Use a soft, lint-free cloth to clean the exterior of the device. For lenses, use a specialized lens cleaning solution and cloth to avoid scratching. Do not use abrasive cleaners or solvents.

2. Storage

Store the HT-60LRF in a cool, dry place, away from direct sunlight and moisture. If storing for extended periods, remove the battery to prevent leakage.

3. Battery Care

To maximize battery life, avoid fully discharging the battery frequently. Recharge the battery regularly, even if the device is not in constant use. Always use the correct charging voltage (5V max).

Troubleshooting

• Device not powering on: Ensure the battery protective sticker has been removed. Check battery charge level. Verify battery is correctly inserted.
• Poor image quality: Adjust the focus. Clean the objective and eyepiece lenses. Ensure sufficient IR illumination in dark conditions.
• Laser Range Finder not working: Ensure the LRF beam is not obstructed. Check battery level.
• Wi-Fi connection issues: Verify the Wi-Fi password (12345678). Ensure your connecting device is within the 15m range.
• Device not charging: Check the charging cable and adapter. Ensure the charging voltage is 5V or below.

Specifications

Warranty and Support

Sytong is committed to providing high-quality products and customer satisfaction. For any questions regarding your HT-60LRF device, technical support, or warranty inquiries, please contact Sytong customer service. Refer to your purchase documentation or the official Sytong website for specific warranty terms and contact information.

As stated by the manufacturer: "If you have any questions about the product, please feel free to contact us, we will reply you within 24 hours. The 100% satisfied purchase is our service aim."