FreedConn FX Motorcycle Bluetooth Headset Instruction Manual

Introduction

The FreedConn FX Motorcycle Bluetooth Headset is designed to enhance your riding experience by providing seamless communication, music sharing, and hands-free calling. This device features advanced Bluetooth 5.0 technology, noise cancellation, and a robust waterproof design, ensuring reliable performance in various conditions.

• 10-Way Conference Intercom & Universal Pairing: Connect with up to 10 riders over a 1500-meter range (optimal for 6 riders). Compatible with most Bluetooth headsets on the market.
• Music Sharing & Noise Cancellation: Share music with another rider and enjoy clear audio at speeds up to 120km/h thanks to advanced noise cancellation.
• Hands-free Speaker & Hi-Fi Stereo Sound Quality: Make and receive calls, listen to Hi-Fi stereo music, FM radio, or GPS voice guidance with Bluetooth 5.0 and Siri/S Voice command access.
• Exchangeable Microphone & Great Helmet Compatibility: Includes both a boom microphone for open-face/flip-up helmets and a button microphone for full-face helmets.
• IP67 Waterproof Design & Long Battery Life: Built to withstand all weather conditions with IP67 waterproofing. The 1100mAh battery provides up to 25 hours of intercom, 15 hours of music, and 300 hours of standby time with Type-C fast charging.

What's in the Box

The FreedConn FX package includes the following components:

• 2x Motorcycle Intercom Units
• 2x Stereo Headsets (including changeable hard mic and soft mic)
• 2x Velcro Clips
• 2x Hook Clips
• 2x USB Cables
• 12x Headset Velcro Pads
• 2x Boxes
• 1x User Manual

Image: All components included in the FreedConn FX Dual Pack.

Setup

Unboxing and Component Overview

Before installation, familiarize yourself with all the components provided in the package.

Mounting the Intercom Unit

Choose between the velcro clip or the hook clip to securely attach the intercom unit to the side of your helmet. Ensure the unit is firmly in place to prevent movement during rides.

Image: The FreedConn FX unit attached to a helmet, demonstrating its low-profile design.

Microphone and Speaker Installation

Install the speakers inside your helmet's ear pockets using the provided velcro pads. Select either the boom microphone (for open-face or modular helmets) or the button microphone (for full-face helmets) and position it close to your mouth for optimal voice clarity. Route the cables neatly under the helmet padding.

Image: Speakers and microphone installed within a helmet, ready for use.

Operating Instructions

Power On/Off

• Power On: Press and hold the On/Off button for 2 seconds. The blue light will flash quickly three times, then slowly.
• Power Off: Press and hold the On/Off button for 3 seconds and release when the red light is on.

Language Switching

To switch the device language, short press the multi-function button and the On/Off button simultaneously while in standby or music pause state.

Indicator Light Control

In power-on state, press the 'C' button once to toggle the running-water indicator light on or off.

Pairing with Mobile Phone

To pair your FreedConn FX with a mobile phone, ensure the device is off. Press and hold the power button for 8 seconds until the red and blue lights flash alternately, indicating pairing mode. Then, search for 'FreedConn FX' in your phone's Bluetooth settings and connect.

Image: The FreedConn FX device demonstrating compatibility with various Bluetooth devices.

Music Playback and Sharing

Once paired with your phone, you can stream music. Use the device's controls to play/pause, skip tracks, and adjust volume. The FX also supports music sharing, allowing you to share your audio with another paired FreedConn FX unit.

Image: Remote music sharing feature between two riders using FreedConn FX headsets.

Phone Calls

The FreedConn FX allows for hands-free calling. You can answer calls automatically (if enabled) or manually, reject calls, and redial the last number. Access your phone's voice assistant (Siri/S Voice) through the headset for voice commands.

FM Radio

The device includes an FM radio function. Tune into your favorite stations while riding. Controls for scanning and saving stations are integrated into the unit.

Intercom Pairing (2 Devices)

To establish a two-way intercom conversation between two FreedConn FX devices, ensure both units have cleared previous pairing records. Power on both devices. On one device, press and hold the intercom button until the red and blue lights flash. On the second device, short press the intercom button. Once connected, the blue lights will flash regularly.

Intercom Pairing (4 Devices)

For group intercom with up to 4 FX devices, ensure all devices (A, B, C, D) have cleared previous pairing records. Pair A and B, then turn off B. Pair B and C, then turn off C. Pair C and D. Finally, short press the power button on A, then B, then C, then D to connect them all into a group chat.

Universal Pairing with Other Brands

The FreedConn FX supports universal pairing, allowing it to connect with intercom devices from other brands. Follow the specific pairing instructions for the third-party device and initiate universal pairing mode on the FX unit.

Clear Pairing Information

To delete all historical pairing information, press and hold the On/Off button for 8 seconds. The red LED indicator light will remain on, then flash twice quickly, confirming the records are cleared.

Enable/Disable Automatic Answer

To enable or disable the automatic answering of phone calls, short press the On/Off button and the Volume Up button simultaneously.

Specifications

Maintenance

To ensure the longevity and optimal performance of your FreedConn FX headset, follow these maintenance guidelines:

• Cleaning: Use a soft, damp cloth to clean the exterior of the intercom unit. Avoid using harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Charging: Always use the provided USB Type C cable for charging. Avoid overcharging or completely draining the battery for extended periods.
• Water Exposure: While IP67 waterproof, avoid prolonged submersion in water. Ensure the USB port cover is securely closed when exposed to moisture.

Troubleshooting

If you encounter issues with your FreedConn FX headset, refer to the following common troubleshooting steps:

• No Power: Ensure the battery is charged. Connect the device to a power source using the USB cable.
• Cannot Pair with Phone: Make sure the headset is in pairing mode (red and blue lights flashing alternately). Clear previous pairing records on both the headset and your phone, then try pairing again.
• Intercom Disconnection: Ensure all participating intercom units are within range and have sufficient battery. Clear pairing records and re-establish the intercom connection if issues persist.
• Poor Audio Quality: Check microphone and speaker placement inside the helmet. Ensure cables are not pinched. Adjust volume levels.
• No Sound: Verify volume levels on both the headset and connected device. Check if the headset is properly connected to the speakers.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official FreedConn website. Keep your proof of purchase for warranty claims.