Introduction
The Feyachi WL25 Tactical Rifle Light is designed for maximum brightness and reliability in various conditions. Featuring 1200 lumens of illumination and a 200-meter beam reach, it offers a 50,000-hour lifetime and an IPX5 waterproof rating. This light includes a programmable tail switch with three operating modes to suit different tactical needs: High/Strobe for defense, High Only for consistent output, or Low/High for extended patrols. Its durable construction from aircraft-grade anodized aluminum alloy ensures abrasion resistance, shockproof capabilities, and excellent weather resistance.
Image: Feyachi WL25 Tactical Rifle Light highlighting its brightness, intensity, and durability features.
What's in the Box
Verify that all components are present in your package:
- 1 x Feyachi WL25 Flashlight with fixed mount
- 1 x Remote switch
- 1 x Instruction Manual
- 1 x Charger
Image: All items included in the Feyachi WL25 product package.
Setup
Battery Installation
To install the battery, unscrew the tail cap of the flashlight. Insert the provided rechargeable battery with the positive (+) end facing towards the flashlight head. Securely screw the tail cap back on. Ensure the waterproof ring is properly seated to maintain the IPX5 rating.
Image: Exploded diagram illustrating the components and battery placement of the Feyachi WL25 flashlight.
Mounting the Light
The Feyachi WL25 comes with a fixed mount designed for Picatinny rails. To attach the light, align the mount with your Picatinny rail and tighten the knob or screw until it is secure. Ensure the light is firmly attached to prevent movement during use. The design allows for quick attachment and detachment.
Image: The Feyachi WL25 flashlight securely mounted on a rail.
Attaching the Pressure Switch
The remote pressure switch can be installed on both Picatinny and M-LOK universal rails. Use the appropriate mounting hardware (included) to secure the pressure switch in a convenient location for activation. Connect the pressure switch cable to the tail cap of the flashlight. Ensure the connection is firm to maintain functionality.
Image: Feyachi WL25 light with the remote pressure switch connected.
Operating Modes
The Feyachi WL25 features TEN-TAP Programming, allowing you to customize and lock in one of three professional operating modes:
- Defense Mode: High → Strobe (Quickly Double-click)
- Duty Mode: High Only
- Patrol Mode: Low → High (Quickly Double-click)
How to Set a Programmed Mode:
- Ensure the light is OFF.
- Half-press the tail switch 9 times quickly.
- On the 10th press, hold until the light blinks and turns off.
- Release. The mode is now changed to the next sequence. Repeat the process to cycle through the three available modes until your desired mode is set.
In-Use Toggle:
Within your chosen mode, quickly double-click the tail switch or pressure switch to toggle between the two preset functions (e.g., High and Strobe in Defense Mode, or Low and High in Patrol Mode).
Image: Detailed explanation of the three programmable operating modes.
Maintenance
To ensure optimal performance and longevity of your Feyachi WL25 Tactical Rifle Light, follow these maintenance guidelines:
- Cleaning: Regularly wipe the flashlight body with a soft, damp cloth. Keep the lens clean and free of dirt or debris. Do not use abrasive cleaners.
- Battery Care: Recharge the battery using the provided charger when the light output diminishes. Store the battery in a cool, dry place when not in use for extended periods.
- O-Rings: Periodically inspect the O-rings for wear and tear. Replace them if damaged to maintain the IPX5 water-resistant rating. Apply a thin layer of silicone grease to the O-rings to ensure a good seal.
- Storage: Store the flashlight in a dry environment, away from extreme temperatures and direct sunlight. Remove the battery if storing for several months to prevent potential leakage.
Image: The Feyachi WL25 demonstrating its IPX5 water resistance and impact resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Low or dead battery Improper battery insertion Loose tail cap Faulty switch connection | Charge or replace battery Ensure battery is inserted correctly (positive end towards head) Tighten tail cap securely Check pressure switch connection |
| Light is dim or flickers | Low battery Loose connections Dirty contacts | Charge battery Ensure all connections are tight Clean battery contacts and flashlight terminals with a clean cloth |
| Cannot change operating modes | Incorrect programming sequence | Refer to the "Operating Modes" section and re-attempt the TEN-TAP programming sequence carefully. |
| Pressure switch not responding | Loose connection Damaged cable | Ensure the pressure switch cable is securely connected to the tail cap Inspect the cable for visible damage. If damaged, contact customer service. |
Specifications
- Brightness: 1200 lumens (High)
- Light Intensity: 22500 Candela
- Beam Distance: 200 meters (656 feet)
- Power Source: Battery Powered (1 C battery included)
- Battery Life (Runtime): 4 hours (High mode), 10 hours (Low mode)
- Light Source Type: LED
- Material: III aircraft-grade anodized aluminum alloy
- Water Resistance Level: IPX5 (Waterproof)
- Shock Resistance: 1-meter drop test certified
- Color Temperature: 6500 Kelvin
- Mounting Type: Gun Mount (Picatinny)
- Item Dimensions (L x W x H): 5.3" x 1.3" x 1.7" (135mm x 32.5mm x 43.2mm)
- Item Weight: 15.84 ounces
- Special Features: Adjustable Light Modes, High Lumens, Rechargeable, Shock Resistant, Weatherproof
Warranty and Support
The Feyachi WL25 Tactical Rifle Light comes with a 3-year product warranty. This warranty covers manufacturing defects and ensures reliable performance under normal use conditions. For any product-related inquiries, technical assistance, or warranty claims, please contact Feyachi customer service through the retailer where the product was purchased or visit the official Feyachi website for support contact information.
Please retain your purchase receipt as proof of purchase for warranty validation.