Introduction
The Auto Joe ATJ-AIR1-HYB Hybrid Inflator + Deflator is a versatile and portable device designed for inflating and deflating various items, including vehicle tires, air mattresses, rafts, pool floats, and sports balls. It offers both 12V DC and 120V AC power options for indoor and outdoor use. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device.
What's in the Box
- ATJ-AIR1-HYB Hybrid Inflator/Deflator Unit
- Tapered Nozzle
- Presta Valve Adapter
- Sports Ball Needle
- 2 High Volume Adapters (with onboard storage)
- 16-inch High Volume Hose
- 25-inch High Pressure Hose
Figure 1: The ATJ-AIR1-HYB Hybrid Inflator/Deflator with its various attachments.
Key Features
- Dual Modes: High volume output for large inflatables and high pressure output for tires.
- LED Light Modes: Integrated 2.4W LED light with Spotlight and SOS warning functions for enhanced visibility and safety.
- Powerful Motors: Equipped with a 60W high volume motor and an 85W high pressure motor.
- Digital Pressure Gauge: Features a 3-setting digital pressure gauge displaying readings in PSI, kPa, and BAR.
- Auto Shut-Off: Automatically stops inflation once the preset pressure is reached, preventing over-inflation.
- Versatile Hoses: Includes a 16-inch high volume hose and a 25-inch high pressure hose for various applications.
- Compact and Portable: Lightweight design (3.6 lbs) for easy transport and storage.
Figure 2: The powerful dual motors of the inflator.
Figure 3: The integrated LED light for low-light conditions.
Figure 4: Digital pressure gauge with multiple unit settings.
Specifications
| Attribute | Value |
|---|---|
| Brand | Auto Joe |
| Model Name | ATJ-AIR1-HYB |
| Voltage | 12 Volts (DC) / 120 Volts (AC) |
| Power Source | Corded Electric |
| High Volume Motor | 60W |
| High Pressure Motor | 85W |
| Item Weight | 3.6 Pounds |
| Product Dimensions | 11.02"L x 8.15"W x 7.64"H |
| High Volume Hose Length | 16 Inches |
| High Pressure Hose Length | 25 Inches |
| Color | Green |
| Material | Plastic |
Setup
- Unpack the Unit: Carefully remove the inflator/deflator and all accessories from the packaging. Inspect for any damage.
- Choose Power Source:
- For 120V AC (Household Outlet) use: Connect the AC power cord to the unit and then to a standard wall outlet.
- For 12V DC (Vehicle Outlet) use: Connect the DC power cord to the unit and then to your vehicle's 12V accessory outlet (cigarette lighter).
- Select Hose and Adapter:
- For high-pressure inflation (e.g., tires): Use the 25-inch high pressure hose and attach the appropriate adapter (e.g., tire air chuck).
- For high-volume inflation/deflation (e.g., air mattresses, floats): Use the 16-inch high volume hose and select one of the two high volume adapters or the tapered nozzle.
- For sports balls, use the sports ball needle. For Presta valves, use the Presta valve adapter.
Figure 5: High volume and high pressure hoses.
Figure 6: Various adapters for different inflation needs.
- Onboard Storage: Utilize the onboard storage compartments for adapters and hoses when not in use.
Figure 7: Onboard storage for adapters.
Operating Instructions
General Operation
- Power On: Connect the unit to the chosen power source (AC or DC). The digital display will illuminate.
- Select Mode: Use the mode selection switch to choose between High Pressure (for tires) or High Volume (for inflatables).
- Set Desired Pressure: Use the '+' and '-' buttons to set the target pressure on the digital display. The display can show PSI, kPa, or BAR; press the 'UNIT' button to cycle through these options.
- Attach Hose: Securely attach the appropriate hose and adapter to the item you wish to inflate/deflate.
- Start/Stop: Press the 'ON/OFF' button to begin inflation/deflation. The unit will automatically shut off once the preset pressure is reached (for inflation).
- LED Light: Press the light button to activate the LED spotlight or cycle to the SOS warning light mode.
Inflating Vehicle Tires
- Ensure the unit is connected to a power source.
- Select the High Pressure mode.
- Screw the tire air chuck adapter onto the tire valve stem.
- Set the desired PSI according to your vehicle's specifications (usually found on a sticker inside the driver's side door jamb or in the owner's manual).
- Press the 'ON' button. The inflator will start and automatically stop when the set pressure is reached.
- Disconnect the air chuck from the tire valve.
Figure 8: Inflating a car tire with auto-shutoff.
Inflating/Deflating Large Inflatables
- Ensure the unit is connected to a power source.
- Select the High Volume mode.
- Attach the appropriate high volume adapter or tapered nozzle to the 16-inch high volume hose.
- Insert the adapter firmly into the inflatable's valve.
- For inflation, press the 'ON' button. Monitor the inflation visually as there is no pressure gauge for high volume.
- For deflation, ensure the hose is connected to the deflation port (if applicable) or use the high volume hose to draw air out.
Figure 9: Ideal for inflating air mattresses and other camping gear.
Maintenance
- Cleaning: Regularly wipe down the exterior of the unit with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the inflator/deflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure all hoses and adapters are properly stored in their designated onboard compartments.
- Cord Care: Always unplug the unit by grasping the plug, not the cord. Avoid kinking or damaging the power cords.
- Filter Cleaning: Periodically check the air intake filter (if accessible) for dust and debris. Clean as necessary to maintain optimal performance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on. | No power supply; loose connection. | Ensure power cord is securely plugged into both the unit and the power outlet. Check the outlet for power. |
| Inflator runs but does not inflate. | Hose or adapter not securely attached; leak in hose/adapter; incorrect mode selected. | Check all connections for tightness. Inspect hoses and adapters for damage. Ensure correct mode (High Pressure/High Volume) is selected for the task. |
| Unit automatically shuts off prematurely. | Preset pressure reached; unit overheating. | If the desired pressure was reached, this is normal operation. If not, allow the unit to cool down for 10-15 minutes before resuming use. Avoid continuous operation for extended periods. |
| Inaccurate pressure readings. | Gauge calibration issue; improper connection. | Ensure the adapter is fully seated on the valve stem. Compare readings with a known accurate pressure gauge. If discrepancies persist, contact customer support. |
Warranty and Support
The Auto Joe ATJ-AIR1-HYB Hybrid Inflator/Deflator typically comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration. For technical support, replacement parts, or warranty claims, please contact Auto Joe customer service through their official website or the contact information provided in your product packaging.
Note: Unauthorized repairs or modifications may void your warranty.