VENTION 65W GaN 3-Port USB Wall Charger (Model FEDW0) User Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your VENTION 65W GaN 3-Port USB Wall Charger. Please read it thoroughly before using the product and retain it for future reference.

2. Safety Instructions

• Do not expose the charger to liquids, moisture, or extreme temperatures.
• Do not disassemble, modify, or attempt to repair the charger.
• Avoid dropping or subjecting the charger to strong impacts.
• Ensure the charger is plugged into a properly grounded wall outlet.
• Disconnect the charger from the power outlet when not in use or during electrical storms.
• Keep out of reach of children.
• Use only with compatible devices and cables.
• The charger may become warm during operation; this is normal. If it becomes excessively hot, disconnect it immediately.

Image: Charging Protections. This diagram highlights the built-in safety mechanisms of the charger, including protection against over-temperature, over-current, over-power, short circuits, over-voltage, and lightning.

3. Package Contents

Verify that all items are present in your package:

• 1 x VENTION 65W GaN 3-Port USB Wall Charger (Model FEDW0)
• 1 x USB Cable
• 1 x User Manual (this document)

4. Product Overview

The VENTION 65W GaN 3-Port USB Wall Charger utilizes Gallium Nitride (GaN) technology for efficient power delivery in a compact form factor. It features two USB-C ports and one USB-A port, allowing for simultaneous charging of multiple devices.

Image: VENTION 65W GaN Charger. This image displays the front of the charger, highlighting its two USB-C ports and one USB-A port.

4.1 Key Features

• 65W Power Delivery: Capable of delivering up to 65W for fast charging compatible laptops and devices.
• GaN Technology: Enables a smaller, lighter, and more efficient charger.
• 3-Port Design: Includes two USB-C ports and one USB-A port for versatile charging.
• Multiple Fast Charge Protocols: Supports PPS, PD3.0, QC4+, SCP, FCP, AFC, MTK PE, BC1.2, and Apple 2.4A.
• Comprehensive Protections: Built-in safeguards against over-temperature, over-current, over-power, short circuit, over-voltage, and lightning.

Image: Gallium Nitride Technology. This image illustrates the GaN chip, emphasizing its benefits: high efficiency, effective heat dissipation, and enhanced safety.

5. Setup

1. Unpack: Carefully remove the charger and any included accessories from the packaging.
2. Inspect: Check the charger for any visible damage. Do not use if damaged.
3. Plug In: Insert the charger's prongs into a standard wall outlet. Ensure it is securely seated.
4. Connect Device: Use a compatible USB charging cable to connect your device to one of the charger's ports (USB-C1, USB-C2, or USB-A).
5. Verify Charging: Confirm that your device indicates it is charging.

Image: Charger in Use. The charger is shown plugged into a wall socket, providing power to a laptop via a USB-C cable, demonstrating its high-efficiency 65W GaN charging capability.

6. Operating Instructions

6.1 Port Specifications and Power Output

The charger features three ports with varying maximum power outputs depending on single or simultaneous use.

• USB-C1 Port: Supports PPS/PD3.0/QC4+/SCP/FCP/AFC/MTK PE/BC1.2/Apple 2.4A. Maximum 65W output.
• USB-C2 Port: Supports PPS/PD3.0/QC4+/SCP/FCP/AFC/MTK PE/BC1.2/Apple 2.4A. Maximum 30W output.
• USB-A Port: Supports QC3.0/SCP/FCP/AFC/BC1.2/Apple 2.4A. Maximum 30W output.

Image: Port Specifications. This graphic provides a detailed breakdown of the maximum power output and supported fast-charging protocols for each of the charger's three ports.

6.2 Charging Guide (Simultaneous Use)

When multiple ports are used simultaneously, the total power output is distributed. Refer to the following guide for power distribution:

Image: Charging Guide. This visual guide illustrates the power output distribution when using one, two, or all three ports simultaneously. For example, using USB-C1 and USB-C2 simultaneously results in 45W from USB-C1 and 18W from USB-C2.

• Single Port Use:
  • USB-C1: Up to 65W
  • USB-C2: Up to 30W
  • USB-A: Up to 30W
• Dual Port Use:
  • USB-C1 + USB-C2: 45W + 18W
  • USB-C1 + USB-A: 45W + 18W
  • USB-C2 + USB-A: 15W + 15W
• Triple Port Use:
  • USB-C1 + USB-C2 + USB-A: 45W + 15W + 15W

Image: Simultaneous Charging. This image shows the charger connected to a power strip, actively charging a laptop, a tablet, and a smartphone at the same time, demonstrating its multi-device capability.

7. Universal Compatibility

The VENTION 65W GaN charger is designed to be compatible with a wide range of devices, including but not limited to:

• Laptops/Tablets: MacBook Pro/Air, Surface Pro/Book, iPad Pro/Air, Dell XPS, etc.
• Phones: iPhone 14/13/12 series, Galaxy S22/S20/Note 20 series, Google Pixel, etc.
• Other Devices: AirPods/Pro, Nintendo Switch, and other USB-powered gadgets.

Image: Universal Compatibility. This graphic illustrates the broad compatibility of the charger with various devices, including laptops, tablets, smartphones, and gaming consoles.

8. Specifications

9. Troubleshooting

• Device not charging:
  • Ensure the charger is securely plugged into a live wall outlet.
  • Verify that the charging cable is properly connected to both the charger and your device.
  • Try a different charging cable.
  • Try a different port on the charger.
  • Ensure your device is compatible with the charger's power output.
• Slow charging:
  • Check the charging guide (Section 6.2) for power distribution when multiple devices are connected. Disconnecting other devices may increase speed for a single device.
  • Ensure your cable supports fast charging protocols.
  • Verify your device supports the fast charging protocols offered by the charger (e.g., PD, QC).
• Charger feels warm:
  • It is normal for the charger to feel warm during operation, especially when charging multiple devices or high-power devices.
  • If it becomes excessively hot or emits smoke/unusual odors, disconnect it immediately and cease use.

10. Maintenance

• Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or aerosols.
• Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Avoid bending or stressing the charging prongs.

Image: Portable Size. This image shows the charger being held, emphasizing its compact dimensions for easy portability.

11. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your purchase or contact VENTION customer service through their official website or the retailer where the product was purchased. Please have your model number (FEDW0) and purchase date available when contacting support.

Note: Specific warranty terms may vary by region and retailer.