EGLO G9 LED Pin Bulb (Model 110152) Instruction Manual

Introduction

This manual provides essential information for the safe and efficient use of your EGLO G9 LED Pin Bulbs. Please read these instructions carefully before installation and retain them for future reference. These LED bulbs are designed to replace traditional 20W halogen bulbs, offering energy efficiency and a warm white light.

Safety Information

• Always switch off the power supply before installing, removing, or cleaning the bulb.
• Ensure the bulb is cool before handling to prevent burns.
• Do not use in fully enclosed luminaires without adequate ventilation, as this may shorten bulb lifespan.
• This bulb is designed for indoor use only.
• Do not disassemble or modify the bulb.
• Dispose of used bulbs according to local regulations.

Package Contents

• 2 x EGLO G9 LED Pin Bulbs (Model 110152)

Setup

1. Turn off Power: Before attempting any installation, ensure the power supply to the light fixture is completely switched off at the main circuit breaker.
2. Remove Old Bulb: Carefully remove the existing G9 halogen bulb from the fixture. Allow it to cool if it has been recently in use.
3. Insert New LED Bulb: Align the two pins of the EGLO G9 LED bulb with the corresponding holes in the G9 socket. Gently push the bulb straight into the socket until it is securely seated. Do not force the bulb.
4. Restore Power: Once the bulb is securely installed, restore power to the light fixture at the main circuit breaker.
5. Test: Turn on the light switch to verify proper operation.

Operating Instructions

• Power On/Off: Operate the bulb using your standard light switch. The LED bulb will illuminate instantly without any warm-up time.
• Dimmable Feature: This EGLO G9 LED bulb is dimmable. If your light fixture is connected to a compatible dimmer switch, you can adjust the light intensity. Ensure your dimmer switch is suitable for LED bulbs to avoid flickering or damage.
• Light Quality: The bulb emits a warm white light at 3000 Kelvin, ideal for creating a comfortable and relaxing ambiance in living rooms and bedrooms.

Maintenance

• Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Replacement: With a lifespan of 15,000 hours, frequent replacement is not expected. When replacement is necessary, follow the 'Setup' instructions in reverse order to remove the old bulb and install a new one.

Troubleshooting

• Bulb Not Lighting Up:
  • Check if the power supply to the fixture is on.
  • Ensure the bulb is correctly seated in the socket.
  • Test the bulb in another working fixture, if possible, to rule out a faulty bulb.
• Flickering:
  • If using a dimmer, ensure it is compatible with LED bulbs. Incompatible dimmers can cause flickering or damage.
  • Check for loose connections in the fixture or wiring.
• Dim Light Output:
  • Verify that the dimmer (if used) is set to maximum brightness.
  • Ensure the bulb's specifications match your lighting needs.

Specifications

Warranty Information

EGLO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official EGLO website. Please retain your proof of purchase for any warranty claims.

Support Information

For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact EGLO customer support. Contact details can typically be found on the product packaging or the official EGLO website (www.eglo.com).