NCVI Baby Bottle User Manual

1. Introduction

Thank you for choosing NCVI Baby Bottles. These bottles are designed to provide a seamless feeding experience for your baby and are compatible with NCVI Breast Pumps 8782 and 8780-2. They are suitable for pumping, storing, and feeding breast milk, featuring an anti-colic design and a breast-shaped nipple for natural latching.

The entire bottle system is constructed from safe, BPA-free materials, ensuring your baby's well-being.

2. Product Components

Each NCVI Baby Bottle set includes the following components:

• 2 x Bottles (4.7oz / 140ml capacity)
• 2 x Nipples (Breast-shaped, natural response)
• 2 x Collars
• 2 x Solid Lids (for storage)
• 2 x Travel Caps (for feeding configuration)

3. Setup and Assembly

Before first use, and after each subsequent use, ensure all components are thoroughly cleaned and sterilized as per the 'Maintenance and Cleaning' section.

3.1. Assembly for Feeding

1. Place the nipple into the collar, pulling it through until it is securely seated.
2. Screw the assembled nipple and collar onto the bottle until tight.
3. Place the travel cap over the nipple and collar assembly to protect the nipple when not in use or during travel.

3.2. Assembly for Storage

1. Ensure the bottle is clean and dry.
2. Place the solid lid securely onto the bottle, twisting until it forms a leak-proof seal. This configuration is ideal for storing breast milk in the refrigerator or freezer.

4. Operating Instructions

4.1. Pumping

These bottles are compatible with NCVI Breast Pumps 8782 and 8780-2. Attach the bottle directly to your compatible NCVI breast pump according to the pump's instructions. After pumping, you can either attach a nipple and cap for immediate feeding or a solid lid for storage.

4.2. Feeding

Ensure the bottle is assembled for feeding (nipple, collar, bottle). The breast-shaped nipple is designed to reduce nipple confusion, and the anti-colic valve helps minimize air intake, preventing discomfort.

4.3. Storage

For breast milk storage, use the solid lid to seal the bottle. This leak-proof design is suitable for refrigeration or freezing. When ready to use frozen milk, the silicone lid design assists in easy opening.

5. Maintenance and Cleaning

Proper cleaning and sterilization are crucial for your baby's health.

• Before First Use: Disassemble all parts and wash them in warm, soapy water. Rinse thoroughly and sterilize by boiling for 5 minutes or using a sterilizer.
• After Each Use: Disassemble all parts immediately after feeding. Wash all components in warm, soapy water using a bottle brush and nipple brush. Rinse thoroughly.
• Dishwasher Safe: All components are dishwasher safe (top rack recommended).
• Drying: Allow all parts to air dry completely on a clean drying rack.

6. Safety Information

• BPA-Free: All NCVI Baby Bottle components are made from BPA-free and BPS-free materials (food-grade silicone and plastic).
• Material Composition: Silicone, Plastic.
• Always check food temperature before feeding.
• Never use feeding nipples as pacifiers.
• Continuous and prolonged sucking of fluids will cause tooth decay.
• Keep all components not in use out of reach of children.

7. Troubleshooting

If you encounter any issues with your NCVI Baby Bottles, please consider the following:

• Leakage: Ensure all components (nipple, collar, bottle, or solid lid) are correctly assembled and tightened. Check for any damage to the silicone nipple or sealing rings.
• Slow Flow/No Flow: Ensure the nipple vent is not blocked. Check if the nipple is correctly inserted into the collar.
• Fast Flow: Ensure you are using the appropriate nipple flow rate for your baby's age and feeding needs.

For further assistance, please contact NCVI customer support.

8. Specifications

9. Warranty and Support

NCVI products are manufactured to high-quality standards. For any questions, concerns, or warranty information, please refer to the product packaging or contact NCVI customer support directly through their official website or the retailer where the product was purchased.