1. Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your Bostitch Office KT-VLED1502-BLK Dimmable Gooseneck LED Desk Lamp. Please read this manual thoroughly before use and retain it for future reference.
The Bostitch Office KT-VLED1502-BLK is an LED desk lamp designed for various lighting needs, featuring a flexible gooseneck, touch-sensitive controls for power and brightness, and an integrated USB charging port.
2. Safety Instructions
To ensure safe operation and prevent damage, observe the following safety guidelines:
- This product is intended for indoor use only. Do not expose to water or high humidity.
- Ensure the power adapter is connected to a compatible power outlet (100 Volts AC).
- Do not attempt to disassemble or modify the lamp. There are no user-serviceable parts inside.
- Keep the lamp away from heat sources and direct sunlight.
- Clean the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- The LED light source is not replaceable.
3. Package Contents
Verify that all items are present in the package:
- Bostitch Office KT-VLED1502-BLK Gooseneck LED Desk Lamp
- AC Adapter
4. Setup
- Unpack the Lamp: Carefully remove the lamp and all components from the packaging.
- Position the Lamp: Place the lamp on a stable, flat surface such as a desk or table.
- Connect Power: Insert the AC adapter cable into the power input port located at the rear of the lamp base. Plug the AC adapter into a standard 100V AC wall outlet.
Image Description: A close-up view of the lamp's base, highlighting the power input port and the built-in USB charging port. An AC adapter is plugged into the power port, and a smartphone is connected to the USB port via a charging cable.
5. Operating Instructions
5.1 Power On/Off and Brightness Adjustment
The lamp features a touch-sensitive control on its base for power and brightness settings.
- To Turn On/Off: Lightly tap the touch control area on the lamp base.
- To Adjust Brightness: Tap the touch control repeatedly to cycle through the three available brightness levels.
Image Description: A hand with a finger touching the circular control area on the lamp's base, demonstrating the touch-sensitive operation.
Image Description: A composite image displaying the desk lamp illuminated at three distinct brightness levels, from dim to bright, illustrating the dimmable feature.
5.2 Flexible Gooseneck
The lamp features a flexible silicone gooseneck, allowing you to adjust the light head to your desired position and angle.
Image Description: A graphic illustrating the flexible gooseneck of the lamp, showing the light head positioned at different angles to highlight its adjustability.
5.3 USB Charging Port
An integrated USB port is located at the rear of the lamp base for convenient charging of compatible devices.
- Connect your device's USB charging cable to the USB port on the lamp.
- Ensure the lamp is powered on for the USB port to function.
Image Description: A close-up of the lamp's base with a smartphone connected to the built-in USB port, indicating active charging.
Official Product Video
Video Description: This video demonstrates the key features of the Bostitch Gooseneck LED Desk Lamp, including its flexible design, touch-sensitive controls for three brightness levels, and the convenient built-in USB charging port. It shows the lamp in various settings and highlights its functionality.
6. Maintenance
The Bostitch Office KT-VLED1502-BLK LED Desk Lamp requires minimal maintenance.
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry, lint-free cloth to wipe the lamp's surfaces. Do not use liquid cleaners, sprays, or abrasive materials.
- LEDs: The integrated LED light source is designed for long-term use (up to 25,000 hours) and is not user-replaceable.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply. | Ensure the AC adapter is securely plugged into the lamp and a working wall outlet. |
| Touch control is unresponsive. | Interference or improper touch. | Ensure your finger makes full contact with the touch control area. Avoid touching with gloves or non-conductive materials. |
| USB charging port is not working. | Lamp is off or cable is faulty. | Ensure the lamp is powered on. Try a different USB cable or device to rule out cable/device issues. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | KT-VLED1502-BLK |
| Product Dimensions | 11.81"D x 6.69"W x 15.16"H |
| Item Weight | 3.47 Pounds |
| Light Source Type | LED |
| Wattage | 4.5 watts |
| Brightness | 480 Lumens (Maximum) |
| Power Source | AC (100 Volts) |
| Control Method | Touch |
| Special Features | Dimmable, USB Charging Port |
| Material | Plastic, Silicone (Gooseneck) |
| Indoor/Outdoor Usage | Indoor Use Only |
9. Warranty and Support
This Bostitch Office KT-VLED1502-BLK Gooseneck LED Desk Lamp is covered by a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or further assistance, please contact Bostitch customer service. Keep your proof of purchase for warranty validation.
