Velivi 15-Inch Beverage Refrigerator and Cooler

1. Safety Information

Please read all instructions carefully before using your Velivi beverage refrigerator. Keep this manual for future reference.

• Electrical Safety: Ensure the appliance is connected to a properly grounded outlet. Do not use extension cords.
• Ventilation: Maintain adequate clearance around the unit for proper ventilation, especially if built-in. The unit features front venting.
• Flammable Refrigerant: This appliance uses R-600A refrigerant, which is flammable. Handle with care and ensure proper ventilation during installation and maintenance.
• Placement: Place the unit on a stable, level surface away from direct sunlight or heat sources.
• Children Safety: The unit includes a door lock. Use it to prevent unauthorized access, especially by children.
• Unpacking: Allow the unit to stand upright for at least 24 hours after delivery before plugging it in to allow the refrigerant to settle.

2. Product Overview

The Velivi 15-inch beverage refrigerator (Model VI-08) is designed for efficient cooling and storage of various beverages. It can be installed as a built-in unit under a counter or used as a freestanding appliance.

Figure 2.1: Velivi 15-inch Beverage Refrigerator.

Key Features:

• Capacity: Stores up to 96 standard beverage cans.
• Cooling System: Features a low-noise compressor and air cooling system for stable temperatures.
• Temperature Control: Digital touch control panel with LED display for precise temperature settings (38-50°F).
• Shelving: Five removable wire shelves with stoppers for secure storage and flexible configuration.
• Door: Double-layer tempered glass door with a stainless steel frame, designed to prevent fogging and maintain internal temperature. Includes a key lock.
• Installation: Suitable for under-counter built-in or freestanding installation with front venting.
• Defrost: Automatic defrost function.

Figure 2.2: Detailed features of the beverage refrigerator, showing the digital control panel, internal lighting, adjustable shelves, front cooling vent, and stainless steel handle.

3. Setup and Installation

3.1 Unpacking

• Carefully remove all packaging materials.
• Inspect the unit for any shipping damage. Report any damage immediately to the retailer.
• Allow the refrigerator to stand upright for at least 24 hours before plugging it into a power source. This allows the refrigerant fluids to settle.

3.2 Placement

The Velivi beverage refrigerator is designed for both freestanding and built-in (under-counter) installations.

• Freestanding: Place the unit in a location with sufficient space around it for air circulation.
• Built-in (Under-Counter): Ensure the cabinet opening meets the required dimensions. The unit's front venting system allows for flush installation.
• Avoid placing the unit near heat sources (e.g., oven, radiator, direct sunlight) or in areas with extreme temperature fluctuations.
• Ensure the floor is level and strong enough to support the unit when fully loaded. Adjustable feet are provided for leveling.

Figure 3.1: Installation options and dimensions for the Velivi beverage refrigerator.

3.3 Electrical Connection

• Connect the unit to a dedicated, grounded 115V/60Hz AC outlet.
• Do not use an adapter or extension cord.
• The power plug type is Type A - 2 pin (North American).

3.4 Door Reversal (Optional)

The door is factory-set to open from the left. If you need to reverse the door swing, it is technically possible by rotating the door upside down. However, be aware that reversing the door may affect the functionality of the door lock, as the lock mechanism might not align correctly on the reversed side. Consult a qualified technician if you are unsure about performing this procedure.

4. Operating Instructions

4.1 Control Panel

The unit features a digital touch control panel located at the top of the interior. This panel allows you to adjust temperature, control lighting, and switch between Celsius and Fahrenheit.

Figure 4.1: Digital Touch Control Panel.

• Power Button: Press to turn the unit ON/OFF.
• Temperature Adjustment: Use the UP and DOWN arrows to set your desired temperature between 38°F and 50°F.
• Temperature Unit Conversion: Press the °C/°F button to switch between Celsius and Fahrenheit display.
• Light Control: Press the light bulb icon to turn the interior LED lighting ON/OFF.
• Temperature Memory Function: In case of a power outage, the unit will automatically restore the last set temperature once power is restored.

4.2 Loading and Shelving

The refrigerator comes with five removable wire shelves. These shelves are designed to accommodate various bottle and can sizes. Stoppers on both sides help secure your beverages.

• Adjust the shelf height as needed to fit taller bottles or larger quantities of cans.
• Ensure bottles and cans are placed securely to prevent rolling or falling.

Figure 4.2: Interior with adjustable shelves and beverage storage.

5. Maintenance

5.1 Cleaning

• Always unplug the unit before cleaning.
• Clean the interior with a soft cloth and a mild, non-abrasive detergent.
• Wipe down the exterior with a damp cloth. For stainless steel surfaces, use a stainless steel cleaner.
• Regularly clean the front vent to ensure proper airflow and cooling efficiency.

5.2 Automatic Defrost

The Velivi beverage refrigerator features an automatic defrost system. Frost will melt and drain into an evaporation tray at the back of the unit. No manual defrosting is typically required.

6. Troubleshooting

Before contacting customer support, please refer to the following common issues and solutions:

7. Specifications

8. Warranty and Customer Support

Velivi is committed to providing high-quality products and excellent customer service. For any questions, technical assistance, or warranty inquiries, please contact our professional support team:

• Email: Velivi163.com
• Phone: +1 213-432-5433

Please have your model number (VI-08) and purchase date available when contacting support.