1. Safety Instructions
Please read these safety instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Beware of sharp edges: Handle all components with care during unpacking and assembly to avoid cuts.
- Tipping hazard: Follow the assembly instructions precisely to ensure stability and prevent the furniture from tipping over. Do not climb on the furniture.
- Weather exposure: Do not expose the product to extreme weather conditions such as heavy storms, strong winds, or prolonged heavy rain. Use the provided protective cover or store indoors during harsh weather.
- Weight limits: Do not exceed the maximum weight capacity for chairs (120 kg) and table (60 kg).
- Children and pets: Keep children and pets away from the assembly area. Ensure all small parts are out of reach.
2. Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 6 x Chairs with seat cushions
- 1 x Table with 2 glass plates
- 1 x Protective cover
- Assembly materials (screws, Allen key, etc.)
- Assembly instructions
Image: Overview of the tectake garden furniture set components.
3. Setup and Assembly
Assembly instructions are included in your package. Please follow them step-by-step. Assembly typically requires two people and can be time-consuming.
- Preparation: Clear a spacious, flat area for assembly. Lay out all components and hardware.
- Initial Fastening: When attaching screws, tighten them just enough to hold the parts together. This allows for minor adjustments to align all components correctly.
- Final Tightening: Once all parts are correctly aligned and loosely assembled, proceed to fully tighten all screws. Ensure even tightening to prevent wobbling.
- Chair Assembly: Assemble each chair individually, ensuring the legs are stable and the seat is secure.
- Table Assembly: Assemble the table frame, then carefully place the glass plates into position.
Image: A single tectake poly rattan chair, illustrating its design and cushion.
4. Operation and Usage
Your tectake garden furniture set is designed for comfortable outdoor living.
- Comfort: The 5 cm thick cushions provide optimal comfort for extended relaxation.
- Versatility: The table is suitable for outdoor dining, leisure activities, or simply holding beverages.
- Placement: Ideal for gardens, balconies, and terraces. Ensure the furniture is placed on a flat, stable surface.
- UV Resistance: The poly rattan material is UV resistant, helping to maintain its color and integrity over time.
Image: Individuals enjoying a meal on the tectake garden furniture set, demonstrating typical use.
5. Maintenance and Care
Proper maintenance will extend the lifespan and appearance of your garden furniture.
- Cleaning: Wipe the poly rattan and metal frame with a dry cloth. For more stubborn dirt, use a damp cloth with mild soap and water, then dry thoroughly.
- Cushions: The cushion covers are removable and washable. Follow the care instructions on the cushion labels. Allow cushions to dry completely before re-use or storage.
- Glass Tabletop: Clean the glass plates with a standard glass cleaner and a soft cloth.
- Protection: Use the provided protective cover when the furniture is not in use, especially during adverse weather conditions or prolonged periods of non-use, to protect against wear and material discoloration.
- Rust Prevention: The stainless steel screws are designed for durability. Periodically check and tighten all screws to maintain structural integrity.
- Floor Protection: The plastic feet protect your floors from scratches and damage.
Image: Details showcasing the 5cm thick cushions, high-quality poly rattan, and stainless steel screws.
Image: Visual representation of the furniture's weather resistance against rain and sun.
6. Troubleshooting
If you encounter any issues during assembly or use, please refer to the following common solutions:
- Wobbly Chairs/Table: Ensure all screws are fully and evenly tightened. Sometimes, loosening all screws slightly, adjusting the furniture on a flat surface, and then re-tightening them can resolve wobbling.
- Screws Not Fitting: If screws do not seem to fit, double-check the assembly diagram to ensure you are using the correct screw for the designated hole and that parts are oriented correctly. Do not force screws.
- Difficulty Aligning Parts: During assembly, do not fully tighten any screws until all parts are loosely connected. This flexibility allows for better alignment.
- Damage During Delivery: If any parts arrived damaged, do not proceed with assembly. Contact customer support immediately with details and photos of the damage.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 404322-3 |
| Chair Dimensions (L x W x H) | 60 x 55 x 83 cm |
| Seat Dimensions | 46 x 44 cm |
| Cushion Thickness | 5 cm |
| Table Dimensions (L x W x H) | 154 x 90 x 75 cm |
| Item Weight | 64.4 Kilograms |
| Chair Capacity | 120 kg |
| Table Capacity | 60 kg |
| Materials | Metal (steel frame), Poly Rattan (polyethylene), Glass, Plastic (feet), Polyester (cushion covers), Foam (cushion filling) |
| Color | Natural Brown/Dark Grey |
| Special Features | Waterproof, UV Resistant |
| Style | Modern Design |
Image: Detailed dimensions of the table and chair components.
8. Warranty and Support
For any questions, concerns, or issues regarding your tectake garden furniture set, please contact the seller or manufacturer directly.
- Manufacturer: TecTake GmbH
- Seller: TECTAKE FRANCE SAS
- Spare Parts: Information regarding spare parts availability is currently unavailable.
Please retain your proof of purchase for any warranty claims or support inquiries.
