LUTEC DOBLO 6943801125 Outdoor Solar Wall Light

1. Introduction

Thank you for choosing the LUTEC DOBLO 6943801125 Outdoor Solar Wall Light. This product is designed to provide efficient and reliable outdoor illumination using solar energy, featuring an integrated motion detector for enhanced security and convenience. Please read this manual carefully before installation and use to ensure proper operation and to maximize the lifespan of your light.

This durable and robust solar wall light is ideal for gardens, patios, and other outdoor areas, offering natural white LED illumination.

2. Product Features

• Solar Powered: Utilizes a built-in solar panel to charge the internal battery, eliminating the need for external wiring.
• Motion Sensor: Equipped with a motion detector offering a 120° sensing angle and a maximum sensing range of 32.8 feet (10 meters) for automatic illumination.
• High Brightness: Provides up to 1800 lumens of bright, natural white light (4000K color temperature).
• Multiple Operating Modes: Features ON, AUTO, and DIM modes to suit various lighting needs.
• Durable Construction: Made from Aluminum Polycarbonate (PC) with an anthracite finish, designed for outdoor use.
• Weather Resistant: IP44 waterproof rating ensures protection against rain, snow, heat, and frost.
• Replaceable Battery: Includes a replaceable Lithium-ion battery for extended product life.

3. Specifications

4. Safety Instructions

• Ensure the product is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging.
• Do not immerse the product in water. While it is IP44 rated for water resistance, it is not designed for submersion.
• Keep out of reach of children.
• Do not attempt to modify or disassemble the product. This may void the warranty and pose safety risks.
• Dispose of batteries responsibly according to local regulations.
• Ensure the mounting surface is stable and can support the weight of the fixture.

5. Installation and Setup

5.1 Package Contents

• 1 x LUTEC DOBLO Solar Wall Light
• Mounting Screws and Wall Plugs
• User Manual

5.2 Choosing an Installation Location

Select a location outdoors where the solar panel can receive maximum direct sunlight throughout the day. Avoid areas under eaves, trees, or other obstructions that may cast shadows on the solar panel, as this will reduce charging efficiency.

Image: The Lutec Doblo solar wall light installed on an outdoor wall, demonstrating its appearance and illumination.

5.3 Mounting the Light

1. Mark the desired mounting points on the wall using the light fixture as a template.
2. Drill holes at the marked points. Insert wall plugs if necessary for your wall type.
3. Align the light fixture with the drilled holes and secure it firmly with the provided screws.

Image: A detailed view of the Lutec Doblo solar wall light, highlighting its design and integrated motion sensor.

Image: Product detail diagram illustrating key components and dimensions of the solar wall light.

6. Operating Instructions

6.1 Initial Charge

Before first use, allow the solar light to charge for at least 24-48 hours in direct sunlight with the power switch in the 'OFF' position. This ensures the battery is fully charged for optimal performance.

Image: The solar panel and replaceable battery feature of the light.

6.2 Operating Modes

The light typically features a mode selection button or switch. Refer to the diagram below for mode functionalities:

Image: Explanation of the ON, AUTO, and DIM operating modes.

• ON Mode: The light remains on at a low brightness (e.g., 30 lumens) continuously from dusk till dawn, or until the battery depletes.
• AUTO Mode: The light stays off when no motion is detected. When motion is detected, it illuminates at 100% brightness (1800 lumens) for a set duration, then turns off.
• DIM Mode: The light stays on at a low brightness (e.g., 10 lumens) when no motion is detected. When motion is detected, it illuminates at 100% brightness (1800 lumens) for a set duration, then returns to dim mode.

6.3 Motion Sensor Functionality

The integrated motion sensor detects movement within its range and angle, triggering the light according to the selected mode.

Image: Motion sensor detection range and angle illustration.

Image: Key lighting specifications of the solar LED wall light.

7. Maintenance

• Cleaning: Regularly wipe the solar panel and light surface with a soft, damp cloth to remove dust, dirt, or debris. A clean solar panel ensures efficient charging.
• Battery Replacement: If the light's performance significantly degrades over time, the Lithium-ion battery may need replacement. Consult a qualified technician or contact customer support for guidance on battery replacement.
• Weather Protection: The light is IP44 waterproof, designed to withstand various weather conditions.

Image: IP44 waterproof rating and weather resistance features.

8. Troubleshooting

• Light does not turn on at night:
  • Ensure the solar panel is receiving sufficient direct sunlight (6-8 hours daily).
  • Check if the power switch is in the correct operating mode (ON, AUTO, or DIM).
  • Verify that the solar panel is clean and free from obstructions.
  • The battery might be low; allow it to charge for another day.
• Light duration is short:
  • Insufficient sunlight for charging. Relocate the light if possible.
  • Battery may be aging and losing capacity. Consider replacing the battery.
  • Weather conditions (e.g., prolonged cloudy days) can affect charging.
• Motion sensor not working:
  • Ensure the sensor lens is clean.
  • Check for obstructions blocking the sensor's field of view.
  • Verify the light is in AUTO or DIM mode.

9. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer, LUTEC. Keep your purchase receipt as proof of purchase.

Manufacturer: Lutec

Model Number: 6943801125

EAN Reference: 6943801125 - 6939412014272

10. Application Examples

Image: Examples of the solar wall light in different outdoor applications.