1. Introduction and Overview
The THIRDREALITY ZigBee Smart Blind (Model 8531) offers a modern solution for window treatments, combining functionality with smart home integration. These motorized blackout honeycomb blinds are designed for privacy, noise reduction, and energy efficiency. They feature an automatic height setting and can be controlled via remote, app, or voice commands when integrated with compatible smart home systems.
2. What's in the Box
Your THIRDREALITY ZigBee Smart Blind package includes the following components:
- THIRDREALITY ZigBee Smart Blind Unit
- IR Remote Control
- Mounting Brackets
- Screws and Wall Anchors
- AA Batteries (6 required, included)
3. Installation
The Smart Blind is designed for easy, DIY-friendly installation. It supports both inside and outside mount options. Please refer to the size guide provided with your product to ensure correct measurements before installation.
3.1 Measuring Your Window
Accurate measurement is crucial for proper fit and function. For detailed instructions on how to measure your windows for motorized blinds, please watch the video below.
3.2 Mounting the Blind
Secure the mounting brackets to your window frame or wall according to your chosen mount type (inside or outside). Ensure the brackets are level and spaced correctly to support the blind. The blind features a limit switch on the bottom rail for automatic stopping when it reaches the window sill.
4. Operating Instructions
The Smart Blind offers multiple control options for your convenience.
4.1 Local Control Buttons
The bottom rail of the Smart Blind has integrated buttons for manual control. Use these buttons to raise, lower, or stop the blind at your desired position.
4.2 IR Remote Control
An IR remote control is included for convenient wireless operation. Point the remote towards the blind and use the designated buttons to control its movement.
5. Smart Home Integration
The THIRDREALITY Smart Blind is built on the ZigBee 3.0 standard, allowing seamless integration with various smart home ecosystems.
5.1 Direct ZigBee Hub Connection
The blind can directly connect to popular ZigBee hubs such as Echo Plus (1st & 2nd Gen), Echo Studio, Echo 4th Gen, SmartThings (2015/2018), Eero 6 & 6 Pro, Home Assistant (ZHA/ZigBee2MQTT), Hubitat Elevation, Homey Bridge, Homey Pro, and THIRDREALITY Smart Hub.
5.2 Matter Integration (via Smart Bridge MZ1)
For broader compatibility, including Apple HomeKit, Google Home, and Amazon Alexa (requiring a Smart Speaker), the Smart Blind can be integrated via the THIRDREALITY Smart Bridge MZ1 (sold separately). This enables advanced control and monitoring features.
5.3 Voice Control and Routines
Once connected to a compatible hub, you can control your blinds using voice commands through Amazon Alexa. You can also create custom routines, timers, and schedules to automate blind operation based on time, distance, or sunrise/sunset.
6. Maintenance
6.1 Battery Replacement
The Smart Blind is powered by 4 AA batteries located in the bottom rail. Under typical usage conditions (opening/closing once daily), batteries can last up to 6 months. Replace batteries as needed by accessing the battery compartment.
6.2 Product Care
To clean your Smart Blind, use a spot clean method only. Avoid harsh chemicals or excessive moisture.
7. Troubleshooting
If you encounter issues with your Smart Blind, consider the following:
- Check Batteries: Ensure the AA batteries are correctly installed and have sufficient charge.
- Verify Hub Connection: Confirm that your ZigBee hub or Smart Bridge MZ1 is powered on and properly connected to your network.
- ZigBee Range: Make sure the Smart Blind is within the effective range of your ZigBee network. Obstructions can affect signal strength.
- Pairing Mode: If the blind is not responding, try re-entering pairing mode as per the initial setup instructions for your specific hub.
- Firmware Updates: Ensure your smart home hub and the Smart Blind (if applicable via MZ1) have the latest firmware updates.
8. Specifications
| Material | Aluminum, Aluminum Coated Hot Rolled Non-woven Fabric |
| Product Dimensions | 72"L x 20"W |
| Brand | THIRDREALITY |
| Color | White |
| Opacity | Blackout |
| Operation Mode | Automatic |
| Special Feature | Energy saving |
| Size | 20"W x 72"H |
| Mounting Type | Inside/Outside Mount |
| Batteries | 6 AA batteries required (included) |
| Item Model Number | 8531 |
| UPC | 850001595643 |
9. Warranty and Support
The THIRDREALITY ZigBee Smart Blind is manufactured by Third Reality, Inc. For warranty information, technical support, or further assistance, please visit the official THIRDREALITY website or contact their customer service directly.
