Introduction
Thank you for choosing the AIKE AK2070S 1850W Electric Hand Dryer. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new hand dryer. Please read these instructions carefully before use and retain them for future reference.
Image: Front view of the AIKE AK2070S Electric Hand Dryer, showcasing its sleek, vertical design.
Key Features
- Advanced Hygiene: Equipped with negative ion technology, releasing 8 million active oxygen negative ions per second to absorb pollutants, eliminate odors, and maintain fresh indoor air. Features a patented dual-layer HEPA air filter that effectively filters 99.98% of bacteria and dust.
- Rapid Drying: Powerful 1850W motor (24,000 rpm) with adjustable airspeed (80m/s-95m/s) ensures hands are dried in approximately 7 seconds. The dual-sided airflow design envelops hands for quick water removal.
- Smart Energy Efficiency: Offers two operating modes: Normal Temperature and Smart Warm. In Smart Warm mode, the unit intelligently adjusts heating based on ambient temperature, leading to up to 85% energy savings compared to traditional hand dryers.
- Durable Construction: Manufactured from high-quality ABS plastic, providing a robust and easy-to-clean surface that resists bacterial growth.
- Concave Design: Engineered to prevent excess water from splashing back onto the user or surrounding areas, contributing to a cleaner environment.
Image: The concave design of the hand dryer, illustrating how it directs airflow and collects water to prevent splashing.
Setup and Installation
The AIKE AK2070S hand dryer is designed for wall-mounted installation. Professional installation by a qualified electrician is recommended to ensure compliance with local electrical codes and safety standards.
Installation Steps:
- Select Location: Choose a suitable wall location, ensuring adequate space around the unit for user access and maintenance. Consider the recommended mounting height for optimal use.
- Mark Drilling Points: Use the provided mounting template (if included) or measure and mark the drilling points on the wall.
- Drill Holes: Drill holes at the marked points and insert appropriate wall anchors.
- Secure Mounting Bracket: Attach the mounting bracket securely to the wall using screws.
- Electrical Connection: Connect the hand dryer to the electrical supply. Ensure the power is off at the circuit breaker before making any connections. Follow all wiring diagrams and local electrical codes.
- Mount Hand Dryer: Carefully hang the hand dryer onto the mounting bracket and secure it with any retaining screws.
- Initial Check: Restore power and test the unit for proper operation.
Image: Two AIKE AK2070S hand dryers mounted on a wall, demonstrating typical installation in a commercial restroom setting.
Image: Diagram showing the dimensions of the AIKE AK2070S hand dryer (25.79" height, 7.87" depth, 12" width), useful for planning installation space.
Operating Instructions
Basic Operation:
- Activate: Place your hands into the drying chamber from the top opening. The infrared sensor will detect your hands and automatically start the airflow.
- Dry Hands: Move your hands slowly up and down within the drying chamber to ensure all surfaces are exposed to the airflow. The powerful air jets will quickly remove water.
- Deactivate: Once your hands are dry, remove them from the chamber. The hand dryer will automatically stop.
Mode Selection and Adjustments:
The hand dryer features an internal adjustment panel for controlling wind speed and temperature settings, and a display panel for monitoring operational status.
Image: A composite image showing the water collection tank, the internal adjustment panel (with speed dial and hot/cold switch), and the external display panel (with power and check indicators).
- Wind Speed Adjustment: Locate the 'SPEED' dial on the internal adjustment panel. Turn the dial to increase or decrease the airflow intensity.
- Temperature Mode: Use the 'HOT' switch on the internal adjustment panel to select between Normal Temperature mode (heater off) and Smart Warm mode (heater on). In Smart Warm mode, the unit intelligently adjusts heating based on ambient temperature.
- Display Panel: The external display panel provides visual indicators for power status and any system checks, ensuring the operational status is clear.
Maintenance
Regular maintenance ensures optimal performance and longevity of your AIKE AK2070S hand dryer.
Cleaning:
- Exterior: Wipe the exterior surface with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or solvents.
- Air Inlet/Outlet: Periodically check and clean the air inlet and outlet grilles to prevent dust buildup, which can affect performance.
HEPA Filter Maintenance:
The integrated HEPA filter requires periodic cleaning or replacement to maintain air quality and dryer efficiency.
Image: A HEPA filter being accessed and removed from the bottom compartment of the AIKE AK2070S hand dryer for cleaning or replacement.
- Access Filter: Locate the filter compartment, typically at the bottom of the unit. Open the cover to access the HEPA filter.
- Clean/Replace: Gently remove the filter. Clean it according to manufacturer guidelines (e.g., vacuuming) or replace it if heavily soiled or damaged.
- Reinstall: Insert the clean or new HEPA filter back into the compartment and close the cover securely.
Water Tank Management:
The hand dryer features a water collection tank to prevent water drips on the floor.
Image: The removable water collection tank at the base of the AIKE AK2070S hand dryer, designed to collect excess water and keep the floor dry.
- Empty Tank: Regularly check and empty the water collection tank located at the bottom of the unit.
- Clean Tank: Clean the tank with water and mild soap to prevent mold or odor buildup.
- Reinstall: Ensure the tank is properly reinserted and secured after emptying and cleaning.
Troubleshooting
This section addresses common issues you might encounter with your AIKE AK2070S hand dryer. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Hand dryer does not start. | No power supply; sensor obstructed or faulty; internal fuse tripped. | Check power connection and circuit breaker. Ensure hands are placed correctly in the sensor area. Clean sensor if obstructed. Contact support if fuse is suspected. |
| Weak airflow. | Clogged air inlet/outlet; dirty HEPA filter; motor issue. | Clean air grilles. Clean or replace HEPA filter. Contact support if motor issue is suspected. |
| No warm air (in Smart Warm mode). | Heater element issue; ambient temperature too high for heating to activate. | Verify the 'HOT' switch is in the 'on' position. Note that Smart Warm mode may not activate heating if the room is already warm. Contact support if heater element is suspected. |
| Excessive water splashing. | Hands not positioned correctly; water tank full or improperly installed. | Ensure hands are fully inserted into the concave drying area. Empty and properly reinstall the water collection tank. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AK2070S |
| Power | 1850W |
| Motor Speed | 24,000 rpm |
| Wind Speed | 80m/s - 95m/s (adjustable) |
| Drying Time | Approx. 7 seconds |
| Dimensions (L x W x H) | 30.5 x 20 x 65.5 cm (12" x 7.87" x 25.79") |
| Weight | 9.72 kg |
| Material | High-quality ABS Plastic |
| Filter Type | Dual-layer HEPA filter |
| Special Features | Negative Ion Generator, Smart Warm Mode, Water Collection Tank |
Warranty and Support
AIKE provides a 2-year warranty for the AK2070S Electric Hand Dryer. This warranty covers defects in materials and workmanship under normal use.
If the product becomes defective during the warranty period, AIKE will arrange for free repair or replacement. Please retain your proof of purchase for warranty claims.
For any questions, technical assistance, or warranty claims, please contact AIKE customer support. Refer to the product packaging or the AIKE official website for the most current contact information.
AIKE Customer Support: support@aike.com (Example email, please refer to actual product documentation for correct contact details.)
