Introduction
Thank you for choosing the TecTake Poly Rattan Garden Lounge Set. This comprehensive manual provides essential information for the safe assembly, operation, maintenance, and care of your new outdoor furniture. Designed for comfort and durability, this set offers a spacious and stylish solution for your outdoor gatherings. Please read these instructions carefully before assembly and use to ensure optimal performance and longevity of your product.
Safety Instructions
- Always assemble the furniture on a flat, stable, and clean surface to prevent damage and ensure stability.
- Ensure all screws and connections are securely tightened before using the furniture. Periodically check and re-tighten as necessary.
- Do not exceed the maximum load capacity for chairs (120 kg) and stools (80 kg).
- Keep the furniture away from open flames, excessive heat sources, and sharp objects.
- Use the provided protective cover during adverse weather conditions (rain, snow, strong sun) to protect the furniture from damage and discoloration.
- Supervise children around the furniture to prevent accidents.
- Avoid standing on the table or chairs.
Package Contents
Before beginning assembly, please verify that all components listed below are present in your package:
- 8 x Armchairs with seat and back cushions
- 4 x Stools with seat cushions
- 1 x Table with 4 glass plates
- 1 x Protective cover
- Assembly materials (screws, tools)
- Assembly instructions (this manual)
Image: Complete TecTake Poly Rattan Garden Lounge Set, showing all components.
Setup and Assembly
Your TecTake Garden Lounge Set is delivered disassembled. Assembly is required. The set features a robust steel/iron frame, lacquered against corrosion, and includes durable stainless steel screws for secure construction. Plastic feet are included to protect your floors from scratches.
Assembly Steps:
- Unpack and Identify: Carefully unpack all components and lay them out. Compare them with the package contents list to ensure nothing is missing. Identify all hardware (screws, washers, tools).
- Assemble the Table: Begin by assembling the table frame. Follow the diagrams in the included assembly guide to connect the frame pieces using the provided screws. Ensure all connections are firm but do not fully tighten screws until the entire frame is assembled.
- Attach Table Glass Plates: Once the table frame is stable, carefully place the four glass plates onto the designated areas of the table.
- Assemble Chairs and Stools: Proceed to assemble the chairs and stools. Attach the legs and frame components as per the instructions. Ensure the structure is stable.
- Insert Cushions: Place the comfortable seat and back cushions onto the chairs and seat cushions onto the stools.
- Final Tightening: Once all components are assembled, go back and fully tighten all screws. Ensure the furniture is stable and does not wobble before use.
Image: Stainless steel screws for durable assembly.
Operating Instructions
Your TecTake Garden Lounge Set is designed for versatile use and comfort, accommodating up to 12 people.
- Spacious Seating: Arrange the 8 chairs and 4 stools around the table to create a comfortable dining or lounge area for family and friends.
- Compact Storage: When not in use, the chairs and stools are designed to fit perfectly under the table, creating a compact cube shape. This feature saves space and protects the furniture. To achieve this, ensure the chair backrests are folded down if applicable, and then slide the chairs and stools under the table.
- Comfort: The comfortable cushions provide an inviting seating experience. Ensure cushions are placed correctly on the chairs and stools for optimal comfort.
Image: The garden lounge set demonstrating its compact storage capability with chairs and stools tucked under the table.
Maintenance and Care
Proper care will ensure the longevity and appearance of your TecTake Garden Lounge Set.
- Cleaning: For general cleaning, wipe the poly rattan and steel frame with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with clean water and drying thoroughly.
- Cushion Care: The cushions are designed for outdoor use. For best results, store cushions indoors during heavy rain or prolonged periods of non-use. Clean cushion covers according to their care labels, typically by wiping with a damp cloth or hand washing.
- Protective Cover: Always use the provided protective cover when the furniture is not in use, especially during adverse weather conditions (rain, snow, strong sunlight). This will protect the poly rattan from UV damage and discoloration, and the steel frame from excessive moisture.
- Rust Prevention: The steel frame is lacquered against corrosion, and stainless steel screws are used. However, regular inspection for any signs of rust and prompt treatment can further extend the life of the product.
Image: The garden lounge set protected by its cover.
Image: Close-up showing the water-resistant properties of the fabric.
Troubleshooting
Here are some common issues and their potential solutions:
- Furniture Wobbles:
Solution: Ensure the furniture is placed on a completely flat and even surface. Check all assembly screws and connections; tighten any loose ones. - Difficulty Storing Chairs/Stools Under Table:
Solution: Ensure the chair backrests are folded down completely (if applicable to your model). Verify that the chairs and stools are oriented correctly to fit under the table as shown in the operating instructions. - Fading or Discoloration of Rattan/Cushions:
Solution: While poly rattan is UV-resistant, prolonged exposure to direct sunlight can cause some fading over time. Always use the provided protective cover when the furniture is not in use, especially during sunny periods, to minimize exposure. - Minor Scratches on Floor:
Solution: The furniture is equipped with plastic feet to prevent scratches. If scratches occur, ensure the plastic feet are intact and properly attached. Avoid dragging the furniture; lift it when moving.
Specifications
| Brand | TecTake |
| Model Number | 800823 |
| Material | Alloy Steel, Plastic, Rattan, Glass |
| Color | Nature-dark grey | No.404395 |
| Style | Garden |
| Shape | Rectangular |
| Assembly Required | Yes |
| Total Product Dimensions (L x W x H) | 335 x 245 x 87 cm (approx. 3.35 x 2.45 x 0.87 meters) |
| Item Depth | 73 cm |
| Total Product Weight | 129 Kilograms |
| Chair Total Dimensions (L x W x H) | 53 x 53 x 87 cm |
| Chair Seat Height | 43 cm |
| Chair Seat Cushion Dimensions | 47 x 43 x 5 cm |
| Stool Total Dimensions (L x W x H) | 41 x 41 x 33 cm |
| Table Total Dimensions (L x W x H) | 223 x 109 x 73 cm |
| Load Capacity (Chair) | 120 kg |
| Load Capacity (Stool) | 80 kg |
| Weight (Chair) | 8.5 kg |
| Weight (Stool) | 3 kg |
| Weight (Table) | 41 kg |
Image: Detailed dimensions of the TecTake Garden Lounge Set components.
Warranty and Support
For any questions regarding assembly, operation, or maintenance of your TecTake Garden Lounge Set, please contact the manufacturer, tectake, or your point of purchase. Please refer to your purchase documentation for specific warranty terms and conditions.
No official product videos from the seller were found for this product.
