Moen Attune 8-Function Wall Mount Fixed Showerhead

1. Product Overview

The Moen Attune 8-Function Wall Mount Fixed Showerhead is designed to provide a versatile and refreshing showering experience. This showerhead features eight optimized spray settings, ensuring consistent water pressure and full coverage. Its Spot Resist Brushed Nickel finish helps maintain a cleaner appearance by resisting fingerprints and water spots. Engineered to meet EPA WaterSense criteria, this showerhead conserves water without compromising performance.

Image 1.1: The Moen Attune 8-Function Wall Mount Fixed Showerhead, showcasing its design and finish.

2. Package Contents

Verify that all components are present before beginning installation:

• Moen Attune 8-Function Wall Mount Fixed Showerhead
• Pre-installed Washer

Image 2.1: Components included with the Moen Attune showerhead, highlighting the main unit and the pre-installed washer.

3. Installation Instructions

This showerhead is designed for easy installation on standard shower arms. No specialized tools are typically required.

1. Preparation: Ensure the water supply to your shower is turned off. Remove your existing showerhead by unscrewing it counter-clockwise from the shower arm. Clean any old sealant or debris from the shower arm threads.
2. Apply Thread Sealant: Wrap plumber's tape (not included) clockwise around the threads of the shower arm 3-4 times. This helps prevent leaks.
3. Attach Showerhead: Ensure the washer is properly seated inside the showerhead connection. Screw the Moen Attune showerhead onto the shower arm clockwise until hand-tight. Do not overtighten, as this can damage the threads.
4. Test for Leaks: Turn on the water supply and check for any leaks around the connection. If leaks occur, tighten slightly or reapply plumber's tape.

Image 3.1: The Moen Attune showerhead properly installed on a standard shower arm, ready for use.

4. Operating Instructions

The Moen Attune showerhead features a rotating dial to easily switch between its 8 distinct spray settings.

1. Turn on Water: Activate your shower's water supply.
2. Select Spray Setting: Rotate the dial located around the face of the showerhead to cycle through the available spray patterns. Each click indicates a new setting.
3. Adjust Water Flow: Use your shower's main handle to adjust water temperature and pressure as desired.

Image 4.1: The Moen Attune showerhead in operation, demonstrating a powerful spray setting.

Available Spray Settings:

• Pause | Trickle
• Rinse
• Downpour
• Full Coverage
• Full Coverage Light
• Relaxing Massage
• Massage
• Soothing Massage

5. Maintenance and Cleaning

Regular cleaning will help maintain the appearance and performance of your Moen Attune showerhead.

• Spot Resist Finish: The Spot Resist Brushed Nickel finish is designed to resist fingerprints and water spots. Clean with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scrubbing pads, as these can damage the finish.
• Nozzle Cleaning: The silicone nozzles are easy to clean. Simply rub them with your fingers to dislodge any mineral buildup or hard water deposits. This helps maintain optimal spray performance.

Image 5.1: Visual demonstration of Moen's Spot Resist Technology, showing its effectiveness against fingerprints and water spots.

6. Troubleshooting

If you encounter issues with your showerhead, refer to the following common solutions:

• Low Water Pressure:
  • Check if the water supply valve is fully open.
  • Clean the showerhead nozzles for mineral buildup (refer to Maintenance section).
  • Inspect the washer for proper seating or damage.
• Leaking Connection:
  • Ensure the showerhead is securely hand-tightened onto the shower arm.
  • Reapply plumber's tape to the shower arm threads, ensuring adequate wraps.
• Difficulty Changing Spray Settings:
  • Ensure the rotating dial is free of debris or mineral buildup. Clean as necessary.

7. Specifications

8. Warranty and Support

This Moen product is backed by Moen's Limited Lifetime Warranty. For detailed warranty information, product registration, or technical assistance, please visit the official Moen website or contact Moen customer support directly.

Moen Brand Video:

Video 8.1: An official video from Moen Incorporated, showcasing the brand's commitment to water experiences and product quality.