FeeTUO Soft Roll-Up Tonneau Cover Instruction Manual

1. Product Overview

The FeeTUO Soft Roll-Up Tonneau Cover is designed to protect your truck bed cargo from weather elements and provide enhanced security. This cover features a durable marine-grade vinyl top and a robust aluminum frame, ensuring longevity and reliable performance.

1.1 Compatibility

This tonneau cover is specifically designed for:

• Vehicle: 2009-2025 Ram 1500
• Bed Length: 5.7 feet / 67.4 inches
• Exclusions: Not compatible with models equipped with RamBox, factory utility track systems, or roll bars.

Please measure your truck bed's inside length to confirm compatibility before installation.

Image 1.1: Diagram illustrating how to measure your truck bed length to ensure correct fitment. The diagram shows a 5.7 FT bed as compatible, and 6.4 FT and 8.0 FT beds as incompatible for this specific model.

2. Setup and Installation

Installation of the FeeTUO Soft Roll-Up Tonneau Cover typically takes 20-30 minutes and requires no drilling. Follow these general steps for a secure fit.

2.1 Components Overview

The cover system includes:

• Pre-treated 16 Ga. aluminum rails
• Horizontal crossbars
• Anti-tear marine-grade dual-coated vinyl top
• Front clamps for double safety
• Latching system
• Adjustable tension system
• Weather seals

Image 2.1: Visual guide to key installation features including front clamp double safety, safety fastening, latching system, aluminum frames, quick open device, and weathertight sealing.

2.2 Installation Steps

1. Prepare the Truck Bed: Ensure the truck bed rails are clean and free of debris.
2. Position the Rails: Place the aluminum rails along the inside edges of the truck bed.
3. Secure Front Clamps: Attach the front clamps to secure the front section of the rails to the truck bed. Ensure they are tightened for double safety.
4. Install Crossbars: Position the horizontal crossbars as indicated in the detailed instructions provided with your product.
5. Attach Tonneau Cover: Secure the tonneau cover fabric to the installed rails.
6. Engage Latching System: Ensure the rear latching system engages properly with the tailgate for a secure closure.
7. Adjust Tension: Utilize the adjustable tension system to keep the cover taut and wrinkle-free.
8. Apply Weather Stripping: If included, apply the waterproof strip to enhance the seal and prevent water intrusion.

Image 2.2: Detailed views of the front clamp, latching system, and weathertight seal, crucial for proper installation.

3. Operating Instructions

The FeeTUO Soft Roll-Up Tonneau Cover is designed for ease of use, allowing quick access to your truck bed.

3.1 Opening the Cover (Roll-Up)

1. Release Latch: From the rear of the truck, pull the strap located underneath the cover to disengage the latching system.
2. Roll Up: Begin rolling the vinyl cover towards the cab of the truck.
3. Secure in Open Position: Once fully rolled, secure the cover using the integrated straps or buckles near the cab to prevent it from unrolling during transit. This maximizes bed space.

Image 3.1: Visual demonstration of the soft roll-up mechanism, showing the cover fully closed, partially rolled, and fully rolled and secured.

3.2 Closing the Cover

1. Unsecure: Release the straps or buckles holding the cover in the open position.
2. Unroll: Gently unroll the cover towards the tailgate, ensuring it aligns with the side rails.
3. Engage Latch: Press down firmly on the rear section of the cover until the latching system engages securely with the tailgate.
4. Check Tension: Verify that the cover is taut and wrinkle-free. Adjust the tension system if necessary.

Image 3.2: Detail of the quick open device, a pull strap used to release the cover's latching mechanism.

4. Maintenance

Proper maintenance will extend the life and appearance of your tonneau cover.

4.1 Cleaning

• Clean the vinyl cover regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
• Rinse thoroughly with clean water and allow to air dry.
• Periodically clean the aluminum rails and inspect for any debris that might hinder operation.

4.2 Inspection

• Regularly check the tension of the cover. A properly tensioned cover prevents flapping and reduces wear.
• Inspect all clamps, latches, and mounting hardware for tightness. Tighten any loose components.
• Examine the weather seals around the perimeter of the cover for any signs of wear, cracking, or damage. Replace seals if necessary to maintain water resistance.

5. Troubleshooting

Here are solutions to common issues you might encounter:

5.1 Water Leakage

• Check Seals: Ensure all weather seals are properly seated and free from damage. Apply additional weather stripping if gaps are present, especially near the tailgate or bulkhead.
• Verify Tension: An improperly tensioned cover can create gaps. Adjust the tension system to ensure the vinyl is taut across the bed.
• Inspect Installation: Re-check all clamps and rail alignments to ensure a flush fit against the truck bed.

5.2 Cover Not Latching Securely

• Adjust Latch Position: The latching mechanism may need slight adjustment to properly engage with the tailgate. Refer to the detailed installation guide for specific adjustment procedures.
• Clear Obstructions: Ensure no debris or cargo is preventing the cover from fully closing and latching.

5.3 Difficulty Rolling/Unrolling

• Lubricate: Apply a silicone-based lubricant to the vinyl and rail channels if the cover is stiff or difficult to move.
• Check for Debris: Clear any dirt or small objects from the rail channels that might impede the rolling mechanism.

6. Specifications

Image 6.1: Visual representation of the cover's material, highlighting its resistance to UV, rain, snow, and wind, along with the robust aluminum frame.

7. Warranty Information

Specific warranty details for the FeeTUO Soft Roll-Up Tonneau Cover are typically provided with the product packaging or can be obtained directly from the manufacturer or authorized seller. Please retain your proof of purchase for any warranty claims.

8. Support

For further assistance, technical support, or inquiries regarding your FeeTUO Tonneau Cover, please contact the manufacturer or refer to their official resources.

• Brand: FeeTUO
• Online Store: Visit the FeeTUO Store on Amazon