Product Overview
The SENIX GTSX5-M-0 X5 cordless 58V straight shaft string trimmer is designed for efficient lawn maintenance. It features a high-performance brushless motor and a dual .080” line bump feed cutting head. This tool offers versatility for both trimming and edging tasks.
The 360-degree front handle provides comfortable operation and allows for various cutting angles. The adjustable cut-off blade enables an 11-inch cutting path for precise work in tight areas or a 13-inch path for clearing larger sections more quickly. This tool is compatible with SENIX B25X5 X5 Cordless 58V Li-ion Battery Packs and CHX5 X5 Cordless 58V Battery Pack Chargers, which are sold separately.
Figure 1: Full view of the SENIX X5 58V Max Cordless Brushless String Trimmer.
General Safety Information
WARNING: Operating any power tool requires adherence to safety precautions to prevent injury. Always read and understand the entire instruction manual before use.
- Avoid contact with the cutting line. The cutting line rotates at high speeds and can cause serious injury.
- Always wear appropriate personal protective equipment (PPE) during operation, including safety glasses or goggles, hearing protection, and heavy-duty gloves.
- Ensure the work area is clear of bystanders, children, and pets before starting the trimmer. Maintain a safe distance from others.
- Inspect the tool for any damage or loose parts before each use. Do not operate if damaged.
- Keep hands and feet away from the cutting head at all times, especially when the tool is running.
- Do not operate the trimmer in wet conditions or in the presence of flammable liquids or gases.
- This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always wash hands after handling.
Setup and Assembly
The SENIX GTSX5-M-0 requires some assembly before initial use. Follow these steps carefully:
- Attach the Front Handle: Secure the 360-degree front handle to the shaft using the provided handle mounting hardware. Ensure it is tightened securely for stable operation.
- Install the Guard: Attach the weed eater head shield to the cutting head assembly using the mounting screw. This guard protects against flying debris.
- Insert Battery (Sold Separately): The trimmer operates with a SENIX 58V Max 2.5 Ah lithium-ion battery. Align the battery with the battery port on the tool and slide it in until it clicks into place.
- Charge Battery: Before first use, fully charge the battery using a compatible SENIX CHX5 X5 Cordless 58V Battery Pack Charger. A full charge typically takes about 90 minutes.
Figure 2: Installation of the 360-degree adjustable front handle.
Figure 3: Proper insertion of the 58V lithium-ion battery.
Operating Instructions
Familiarize yourself with the controls and proper operating techniques for optimal performance and safety.
Starting and Stopping
- To start the trimmer, ensure the battery is fully inserted. Press and hold the safety lock-out button, then squeeze the trigger switch.
- To stop the trimmer, release the trigger switch. The cutting head will cease rotation.
Figure 4: Grip and trigger location for starting the trimmer.
Trimming and Edging
- Trimming: Hold the trimmer with both hands, maintaining a comfortable and balanced stance. Swing the cutting head from side to side, keeping it parallel to the ground.
- Edging: Rotate the trimmer head 90 degrees to position the cutting line vertically. Guide the wheel along the edge of sidewalks, driveways, or flowerbeds for a clean, defined edge.
- Adjusting Cutting Path: The adjustable cut-off blade allows you to switch between an 11-inch cutting path for tight areas and a 13-inch path for wider coverage. Refer to the diagram for visual guidance on key features.
- Line Advancement (Bump Feed): To advance the dual .080-inch cutting line, lightly tap the bump knob on the cutting head against the ground while the trimmer is running.
Figure 5: Proper posture and technique for trimming grass.
Figure 6: The cutting head in edging mode, demonstrating vertical line operation.
Figure 7: Key features of the SENIX X5 trimmer, including the adjustable cutting swath.
Product Video Overview
Video 1: An official overview of the SENIX 58V Cordless Brushless Straight Shaft String Trimmer, demonstrating its features and use. This video is provided by Spreetail, a seller of SENIX products.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your SENIX string trimmer.
- Cleaning: After each use, disconnect the battery and clean the trimmer with a damp cloth. Remove any grass clippings, dirt, or debris from the cutting head, guard, and motor housing. Do not use solvents or abrasive cleaners.
- Line Replacement: When the cutting line is depleted, replace it with .080-inch diameter trimmer line. Refer to the product's specific instructions for spool reloading, as some users have noted this can be tedious.
- Blade Inspection: Periodically inspect the cut-off blade on the guard for wear or damage. Replace if necessary to maintain proper line length.
- Storage: Store the trimmer in a dry, secure location away from children and direct sunlight. Remove the battery before storing for extended periods.
Troubleshooting
This section addresses common issues you might encounter with your string trimmer.
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not start. | Battery not charged or improperly inserted. Safety lock-out not engaged. | Ensure battery is fully charged and securely inserted. Press safety lock-out button before squeezing trigger. |
| Cutting line does not advance. | Line is tangled or depleted. Bump feed mechanism is jammed. | Replace or untangle line. Clean debris from bump feed mechanism. |
| Reduced cutting performance. | Dull or short cutting line. Excessive debris in cutting head. | Advance or replace cutting line. Clean cutting head thoroughly. |
| Motor runs, but cutting head does not spin. | Cutting head is jammed by debris. Drive shaft issue. | Disconnect battery and clear any obstructions from the cutting head. If problem persists, contact customer support. |
Specifications
- Brand: SENIX
- Model: GTSX5-M-0
- Power Source: Battery Powered (58V Max Lithium-Ion, battery sold separately)
- Motor Type: Brushless
- Cutting Width: Adjustable 11 inches to 13 inches
- Line Diameter: Dual .080 inches
- Feed Type: Bump Feed
- Shaft Type: Straight Shaft
- Item Weight: 7 Pounds
- Product Dimensions: 41 inches (Length) x 9 inches (Width)
- Speed: 7000 RPM
- Assembly Required: Yes
- UPC: 843212110712
- Manufacturer: YAT
- Country of Origin: China
Warranty Information
SENIX 58 Volt Max* products, including the GTSX5-M-0 string trimmer, are backed by a 3-year limited warranty. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the warranty card included with your product or visit the official SENIX website.
Customer Support
For technical assistance, replacement parts, or warranty inquiries, please contact SENIX customer support. Visit the official SENIX website for the most up-to-date contact information and support resources.
You can also visit the SENIX Store on Amazon for additional product information and accessories.
