1. Introduction
This instruction manual provides essential information for the safe assembly, operation, and maintenance of your TecTake Dining Table and 6 Chairs Set, Model 800551. Please read this manual thoroughly before assembly and retain it for future reference. This set is designed for indoor use in dining rooms or kitchens.
Image 1.1: Overview of the TecTake Dining Table and 6 Chairs Set. The set includes a rectangular table with a glass top and six white faux leather chairs with steel frames.
2. Safety Information
WARNING: To prevent tipping, ensure the table is stable and load it only up to its maximum indicated capacity. Keep small or sharp parts out of reach of young children.
- Always assemble the product on a soft, clean surface to prevent damage.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand on the table or chairs.
- Avoid placing excessively hot or cold items directly on the glass tabletop without protection.
- Distribute weight evenly on the table surface.
- Keep children away from the assembly area.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- 1 x Dining Table (Glass Top, Steel Frame)
- 6 x Dining Chairs (Faux Leather Upholstery, Steel Frame)
- Assembly Hardware (screws, washers, Allen key, etc.)
- Assembly Instructions
Image 3.1: Diagram showing the dimensions of the table and chairs, along with a list of included items and technical specifications.
4. Assembly Instructions
Assembly is required for both the table and chairs. Follow the provided step-by-step instructions carefully. It is recommended to have two people for table assembly.
4.1. Chair Assembly
- Unpack all chair components and lay them out on a protected surface.
- Attach the chair backrest to the seat using the designated screws and Allen key. Do not overtighten initially.
- Secure the chair legs to the seat frame. Ensure the legs are oriented correctly.
- Once all parts are loosely assembled, place the chair on a flat surface and gradually tighten all screws until secure.
- Verify stability. Each chair includes plastic caps on the feet to protect floors.
4.2. Table Assembly
- Unpack all table components and lay them out on a protected surface.
- Assemble the steel frame of the table according to the diagrams in the separate instruction sheet.
- Carefully place the safety glass tabletop onto the assembled frame. The glass top is secured by soft suction cups to prevent movement.
- Ensure the table frame is stable and all connections are tight.
Image 4.1: Close-up views illustrating the horizontal stitching on the chair backrest, the robust steel table frame, the soft suction cups securing the glass top, and the protective plastic caps on the table legs.
5. Usage and Operation
The TecTake Dining Set is designed for comfortable dining and social gatherings. Its minimalist design integrates well into various interior styles.
- Table Use: The safety glass tabletop is durable and easy to clean. It is suitable for holding meals, drinks, and decorative items.
- Chair Use: The faux leather upholstered chairs provide comfortable seating. The high backrest offers good support.
- Capacity: The table has a maximum load capacity of 60 kg. Each chair has a maximum load capacity of 120 kg. Do not exceed these limits.
Image 5.1: The TecTake Dining Set positioned in a modern dining room, showcasing its aesthetic appeal and functional design.
6. Care and Maintenance
Proper care will ensure the longevity and appearance of your dining set.
- Glass Tabletop: Clean with a soft cloth and a mild glass cleaner. Avoid abrasive cleaners or harsh chemicals that could scratch or damage the glass.
- Faux Leather Chairs: Wipe clean with a damp cloth and mild soap. Dry immediately with a clean, soft cloth. Avoid direct sunlight and heat sources to prevent material degradation.
- Steel Frames: Wipe with a damp cloth and dry thoroughly. Avoid prolonged exposure to moisture to prevent rust.
- General: Periodically check all screws and connections and re-tighten them as needed to maintain stability.
7. Troubleshooting
If you encounter any issues with your dining set, refer to the following common solutions:
- Wobbly Table/Chairs: Check all assembly screws and tighten them securely. Ensure the product is on a flat, even surface.
- Scratches on Floor: Ensure the plastic caps on the chair and table legs are intact and properly seated. Replace if damaged.
- Glass Top Movement: Verify that the suction cups beneath the glass top are clean and properly adhered to both the glass and the frame.
For issues not resolved by these steps, please contact TecTake customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | TecTake |
| Model Number | 800551 |
| Table Dimensions (L x W x H) | 130 x 70 x 75 cm (approx. 51.2 x 27.6 x 29.5 inches) |
| Tabletop Thickness | 6 mm |
| Table Weight | Approx. 18.5 kg (40.8 lbs) |
| Table Load Capacity | 60 kg (132 lbs) |
| Chair Total Dimensions (L x W x H) | 41.5 x 49 x 98 cm (approx. 16.3 x 19.3 x 38.6 inches) |
| Chair Seat Dimensions (L x W) | 40.5 x 39.5 cm (approx. 15.9 x 15.6 inches) |
| Chair Seat Height | 47.5 cm (approx. 18.7 inches) |
| Chair Backrest Height | 52 cm (approx. 20.5 inches) |
| Chair Weight (each) | Approx. 4 kg (8.8 lbs) |
| Chair Load Capacity (each) | 120 kg (264 lbs) |
| Materials | Steel (frame), Safety Glass (tabletop), Faux Leather / Polyurethane (chair upholstery) |
| Color | White |
| Total Product Weight | 43.9 kg (96.8 lbs) |
| Assembly Required | Yes |
9. Warranty and Support
Information regarding specific warranty terms is not provided in this manual. Please refer to your purchase documentation or contact the retailer for warranty details.
For technical support, missing parts, or further assistance, please contact TecTake customer service through their official website or the retailer where the product was purchased.
