1. Introduction
This manual provides detailed instructions for the safe and proper installation and use of your PERLESMITH Tilting TV Wall Mount (PSMTK1) and Fixed TV Wall Mount (PSML1). Please read all instructions carefully before installation to ensure correct assembly and to prevent injury or damage.
2. Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 115 lbs (52 kg). Exceeding this limit may result in serious injury or property damage.
- TV Size: Ensure your TV size is within the specified range for the mount (PSMTK1: 23-60 inches; PSML1: 26-60 inches).
- Wall Type: This mount is designed for installation on 16-inch wood studs, solid concrete, or brick walls. DO NOT install on drywall alone.
- Professional Installation: If you are unsure about the installation process or the suitability of your wall, consult a qualified professional installer.
- Check VESA: Verify your TV's VESA mounting hole pattern is compatible with the mount before proceeding.
- Cable Management: Ensure all cables are routed safely and do not interfere with the mount's operation or TV's stability.
3. Package Contents
Please verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.
The package includes the wall plate, TV brackets, and various hardware for mounting to different wall types and TV models. A small level and cable ties are also typically included.
4. Specifications
| Feature | PSMTK1 (Tilting) | PSML1 (Fixed) |
|---|---|---|
| TV Size Compatibility | 23" - 60" | 26" - 60" |
| Weight Capacity | Up to 115 lbs (52 kg) | Up to 115 lbs (52 kg) |
| VESA Compatibility | 75x75mm to 400x400mm | 75x75mm to 400x400mm |
| Tilt Angle | Up to 15 degrees | N/A (Fixed) |
| Profile from Wall | Approx. 1.2 inches | Approx. 1.18 inches |
| Material | Alloy Steel | Alloy Steel |
| Wall Types | 16-inch Wood Studs, Solid Concrete, Brick | 16-inch Wood Studs, Solid Concrete, Brick |
Image: VESA compatibility diagram showing various patterns from 75x75mm to 400x400mm, with a note that it fits mounting holes 400mm/16 inches or less, and does not fit VESA 600x200mm and 600x400mm.
Image: Diagram illustrating compatible VESA patterns, showing horizontal and vertical measurements on the back of a TV, with maximum 400x400mm and minimum 75x75mm.
5. Setup and Installation
5.1 Pre-Installation Checks
- Verify TV Compatibility: Check your TV's VESA mounting hole pattern, weight, and screen size against the specifications.
- Check Wall Type: Identify your wall type (wood studs, concrete, or brick) to use the appropriate hardware.
- Locate Studs: For wood stud installation, use a stud finder to accurately locate the center of the wood studs.
- Clearance: Ensure the TV ports will not be blocked by the mount once installed.
Image: Illustration showing the three compatible wall types: 8"-16" Wood Studs, Solid Concrete, and Brick. A warning states: "Do not install on drywall alone."
5.2 Installation Steps
- Attach TV Brackets to TV: Secure the vertical TV brackets to the back of your television using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and level.
- Mount Wall Plate to Wall: Mark the desired height for your TV. For wood studs, drill pilot holes into the center of the studs and secure the wall plate using lag bolts. For concrete/brick, use a masonry drill bit, insert anchors, and then secure the wall plate with lag bolts. Use the included level to ensure the wall plate is perfectly horizontal.
- Hang TV on Wall Plate: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the TV is securely seated on the wall plate.
- Secure TV to Mount: For PSMTK1, pull down the quick-release straps to engage the locking mechanism, securing the TV to the wall plate. For PSML1, ensure the safety screws are tightened to prevent accidental dislodgement.
Image: Visual representation of simplified installation, showing TV brackets being attached to the TV, and then the TV being hung onto the wall plate, followed by using the pull cord for locking/release.
Image: Close-up view of the tilting mount highlighting 'Stronger Support' with 115 lbs max weight, an 'Enhanced hook for drop-free use', and a 'Secure with anti-drop buckle' mechanism.
Image: Detailed views of the mount's safety features, including a 'Safety Lock', 'Sturdy Hook', and 'Anti-drop Design'.
6. Operating Instructions (PSMTK1 Tilting Mount)
The PSMTK1 model allows for tilting your TV to achieve optimal viewing angles and reduce glare.
- Adjusting Tilt: Gently push or pull the bottom of your TV to adjust the tilt angle. The mount allows for up to 15 degrees of tilt.
- Locking/Unlocking: The pull-down straps on the TV brackets are used to engage or disengage the locking mechanism. Pulling them down releases the TV from the wall plate for removal or adjustment. Ensure they are securely engaged after positioning the TV.
Image: A TV mounted on the wall, demonstrating a -7 degree tilt to reduce glare, with text indicating compatibility for 23"-60" TVs and listing various VESA patterns.
7. Maintenance
- Cleaning: Clean the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Periodic Checks: Periodically check all screws and connections to ensure they remain tight and secure.
- Inspect for Damage: Regularly inspect the mount for any signs of wear or damage. If any damage is observed, discontinue use and contact customer support.
8. Troubleshooting
- TV Not Level: If the TV is not level after installation, carefully adjust the wall plate or TV brackets as needed. Some mounts offer post-installation leveling adjustments.
- Difficulty Hanging TV: Ensure the TV brackets are correctly aligned with the wall plate hooks. Check for any obstructions.
- Mount Feels Loose: Re-check all wall mounting screws and TV bracket screws to ensure they are tightened according to the instructions. Do not overtighten.
9. Customer Support
For any questions, missing parts, or technical assistance, please contact PERLESMITH customer service. Refer to the product packaging or the PERLESMITH website for contact information.
