VLOXO Cordless Electric Scissors Model AT001 User Manual

1. Introduction

Thank you for choosing the VLOXO Cordless Electric Scissors, Model AT001. This tool is designed for efficient cutting of various materials such as cardboard, leather, plastic mats, carpets, and felt. Please read this manual thoroughly before use to ensure safe and optimal operation.

Package Contents

• Cordless Electric Scissor Unit (1)
• TYPE-C Charge Cable (1)
• Storage Case (1)
• User Manual (1)

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the tool.

• Keep hands and fingers away from the rotating blade during operation.
• Ensure the safety lock switch is engaged when the tool is not in use to prevent accidental activation.
• Do not use the tool for cutting fabric or for precision cuts, as it is not designed for these applications.
• Do not use the tool while it is charging.
• Store the tool in its storage case when not in use, out of reach of children.
• Wear appropriate personal protective equipment, such as safety glasses, when operating the tool.
• Do not attempt to cut materials thicker than 1/4 inch (6.35 mm).
• Keep the blade guard area clean to ensure proper sharpening and operation.

3. Setup

Charging the Battery

1. Locate the TYPE-C charging port on the tool.
2. Connect the provided TYPE-C charge cable to the tool and a compatible USB power adapter (not included).
3. The charging indicator light will illuminate.
4. Allow the tool to charge fully before first use. Charging time may vary.
5. Disconnect the charger once fully charged.

Important: Do not operate the electric scissors while charging.

If the tool is not used for an extended period, charge it regularly to maintain battery health.

4. Operating Instructions

Activating the Tool

The VLOXO electric scissors feature a safety lock-off mechanism to prevent unintended activation.

1. Press the Safety Lock Switch: With your thumb, press the safety lock switch located on the side of the handle.
2. Pull the Trigger: While holding the safety lock switch, pull the main trigger with your index finger. The blade will begin to rotate.
3. Release Safety Lock: Once the blade is rotating, you may release the safety lock switch. The tool will continue to operate as long as the trigger is pressed.
4. Stop Operation: Release the trigger to stop the blade.

Cutting Materials

The VLOXO electric scissors are suitable for cutting materials up to 1/4 inch (6.35 mm) thick, including:

• Cardboard
• Leather
• Plastic Mats
• Carpets
• Felts

Note: This tool is not recommended for cutting fabric or for applications requiring high precision.

1. Ensure the material to be cut is placed on a stable, flat surface.
2. Activate the tool as described above.
3. Gently guide the rotating blade along the desired cutting line. Apply steady, even pressure.
4. Allow the tool to do the work; do not force it through materials.
5. After cutting, release the trigger and store the tool safely.

5. Maintenance

Blade Sharpening

The VLOXO electric scissors are equipped with an automatic sharpening system. This system ensures the octagonal blade remains sharp during use.

• To maintain optimal cutting performance, regularly inspect the area around the blade guard.
• Ensure this area is free from dust and debris.
• Clean by blowing out with compressed air or using a small brush.

Cleaning and Storage

• Before cleaning, ensure the tool is turned off and the safety lock is engaged.
• Use a dry cloth to wipe down the exterior of the tool.
• Remove any accumulated debris from the blade area using a brush or compressed air.
• Store the electric scissors in the provided storage case in a dry, cool place.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official VLOXO website.

Keep your purchase receipt as proof of purchase for warranty claims.