Sunrosa Pivot Tub Shower Door Instruction Manual

1. Product Overview

The Sunrosa Pivot Tub Shower Door is designed to provide a modern, frameless look for your bathtub. It features a smooth and quiet pivot opening mechanism, constructed with high-quality tempered glass and anodized aluminum for durability and ease of maintenance. This manual provides detailed instructions for installation, operation, and care to ensure optimal performance and longevity of your shower door.

Key features include:

• Modern, minimalist frameless design.
• Smooth and quiet pivot opening.
• Special lacquering process on aluminum for better texture and easy cleaning.
• ANSI Certified 1/4-inch (6 MM) tempered glass for safety and easy cleaning.
• Dimensions: 43 3/8" Width x 58" Height.

Image: The Sunrosa Pivot Tub Shower Door in a bathroom setting.

2. Safety Information

Please read all instructions carefully before beginning installation. Failure to follow these instructions could result in personal injury or product damage.

• Wear Safety Glasses: Always wear appropriate eye protection during installation.
• Handle Glass with Care: Tempered glass is strong but can shatter if struck at the edges or corners. Handle with extreme care.
• Two-Person Installation: Due to the weight and size of the glass panel, a minimum of two people are required for safe installation.
• Secure Mounting: Ensure the mounting surface is structurally sound and capable of supporting the weight of the shower door. Use appropriate anchors for your wall type.
• Proper Sealing: Apply silicone sealant as instructed to prevent water leakage. Allow adequate curing time before use.
• Keep Children Away: Keep children and pets away from the installation area.

3. Package Contents

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, please contact Sunrosa customer support.

• Glass panel
• Handle
• Wall profiles/hinge assembly
• Mounting hardware (screws, anchors)
• Sealing strips
• Other accessories (as per specific model)

4. Tools Required

The following tools are recommended for installation:

• Tape Measure
• Pencil
• Level
• Drill (with 6mm and 3mm drill bits for masonry/tile)
• Screwdriver (Phillips head)
• Rubber Mallet
• Wrench
• Caulk Gun and Silicone Sealant
• Utility Knife
• Saw (if profile trimming is required)

5. Setup and Installation

Follow these steps for proper installation. It is highly recommended to watch the official installation video for visual guidance.

5.1. Pre-Installation Checks

• Measure your wall and bathtub dimensions to ensure compatibility with the 43 3/8"W x 58"H door.
• Ensure the installation surface is clean, dry, and level.

Image: Dimensional diagram for the Sunrosa Pivot Tub Shower Door.

5.2. Wall Profile Installation

• Position the wall profile against the wall, ensuring it is plumb and level. Mark the drilling points.
• Drill holes (6mm diameter) at the marked locations. Insert wall anchors.
• Secure the wall profile to the wall using the provided screws (ST4x35).

5.3. Glass Panel Assembly

• Attach the hinge mechanism to the glass panel. Ensure screws are tightened securely.
• Carefully insert the glass panel into the installed wall profile.
• Attach the support bar to the top of the glass panel and secure it to the wall. Mark and drill holes (6mm diameter) for the support bar wall mount, insert anchors, and secure with screws (ST4x35).
• Install the handle onto the glass panel.
• Apply sealing strips to the bottom edge of the glass panel to prevent water leakage.

Image: Detail of the pivot mechanism for smooth door operation.

Image: Detail of the hinge and bottom sealing strip.

Image: Integrated towel bar for convenience.

5.4. Sealing and Curing

• Apply a continuous bead of silicone sealant along all exterior seams where the wall profile meets the wall and the bathtub.
• Allow the silicone sealant to cure for a minimum of 24 hours before using the shower enclosure. This ensures a watertight seal.

5.5. Reversible Installation

The Sunrosa Pivot Tub Shower Door is designed for reversible installation, allowing you to customize the opening direction to suit your bathroom layout. The pivot mechanism can be configured to open either to the left or to the right during the installation process.

Image: Reversible installation options for the shower door.

5.6. Installation Video

For a comprehensive visual guide, please refer to the official installation video:

6. Operating Instructions

The Sunrosa Pivot Tub Shower Door is designed for simple and smooth operation.

• To open the door, gently push or pull the handle in the desired direction (inward or outward, depending on your installation).
• The pivot mechanism allows for a wide opening range, providing easy access to the bathtub.
• Ensure the door is fully closed before showering to prevent water from escaping the enclosure.

7. Maintenance and Care

Regular cleaning and maintenance will help preserve the appearance and functionality of your Sunrosa shower door.

• Glass Cleaning: Clean the tempered glass regularly with a soft cloth and a non-abrasive glass cleaner. Avoid using harsh chemicals, abrasive pads, or scouring powders, as these can scratch the glass or damage the protective coating.
• Frame Cleaning: Wipe down the anodized aluminum frame with a soft, damp cloth. For stubborn spots, use a mild soap solution. Dry thoroughly to prevent water spots.
• Seals: Periodically inspect the sealing strips for wear or damage. Replace if necessary to maintain a watertight enclosure.
• Hinges/Pivot: The pivot mechanism is designed for smooth operation. Avoid applying excessive force when opening or closing the door. Lubrication is generally not required.

Image: Premium clear tempered glass, designed for easy cleaning.

8. Troubleshooting

If you encounter any issues with your Sunrosa Pivot Tub Shower Door, refer to the following common problems and solutions:

If the problem persists or you are unsure about any step, please contact Sunrosa customer support or consult a qualified professional.

9. Specifications

10. Warranty and Support

Sunrosa is committed to customer satisfaction. If you are not completely satisfied with your product or receive a defective item, please do not hesitate to contact us. We are always happy to resolve any issues or concerns you may have.

For support, please refer to your purchase documentation or visit the official Sunrosa website for contact information.

Note: Keep your proof of purchase for any warranty claims.