FiiO JD10 Type-C Dynamic Driver In-Ear Monitors User Manual

1. Introduction

The FiiO JD10 Type-C In-Ear Monitors are designed to deliver high-quality audio performance through a dynamic driver system. This manual provides essential information for the proper setup, operation, and maintenance of your JD10 Type-C earphones, ensuring an optimal listening experience.

The JD10 Type-C features a 10mm polymer composite diaphragm, a dual-cavity structure for precise airflow control, and an ultra-fine CCAW voice coil. It incorporates N52 grade high-performance magnets for powerful driving. The Type-C version includes an independent DSP chip supporting 384 kHz/24 bit high-resolution sound playback and offers 6 built-in sound quality presets.

2. Package Contents

Verify that all items listed below are present in your package:

FiiO JD10 Type-C In-Ear Monitors
3 pairs of ear tips (sizes S/M/L; M size pre-installed)
Quick Start Guide

3. Product Overview

The FiiO JD10 Type-C In-Ear Monitors are engineered for comfort and audio fidelity. Key components include the earphone units, the integrated Type-C cable with remote control, and interchangeable ear tips.

FiiO JD10 Type-C In-Ear Monitors with clear housing and braided cable

Figure 3.1: Overview of the FiiO JD10 Type-C In-Ear Monitors, showcasing their transparent design and cable.

Close-up of FiiO JD10 Type-C earphone unit

Figure 3.2: Detailed view of a single FiiO JD10 Type-C earphone unit, highlighting the FiiO branding and ear tip.

FiiO JD10 Type-C earphones placed on a laptop keyboard

Figure 3.3: The FiiO JD10 Type-C earphones positioned on a laptop, illustrating their compact size and cable design.

4. Setup

Follow these steps to set up your FiiO JD10 Type-C earphones:

Select Ear Tips: Choose the ear tips that provide the best seal and comfort for your ears. The correct size ensures optimal sound quality and passive noise isolation. Gently pull off the pre-installed ear tips and push on the desired size.
Connect to Device: Insert the USB Type-C connector of the earphones into the Type-C port of your compatible smartphone, tablet, laptop, or other audio device.
Wear Earphones: Place the earphones into your ears. The cable is designed to loop over your ear for a secure and comfortable fit. Ensure the left (L) and right (R) indicators on the earphone units correspond to the correct ear.

5. Operating Instructions

The FiiO JD10 Type-C earphones feature an in-line remote control for convenient operation and an independent DSP chip for enhanced audio processing.

5.1 Remote Control Functions

The integrated remote control allows for basic audio playback and call management:

Play/Pause: Press the center button once.
Next Track: Press the center button twice quickly.
Previous Track: Press the center button three times quickly.
Answer/End Call: Press the center button once during an incoming call or active call.
Reject Call: Press and hold the center button during an incoming call.
Volume Control: Use the dedicated volume up (+) and volume down (-) buttons.

5.2 DSP Chip and Sound Presets (Type-C Version Only)

The JD10 Type-C model includes an independent DSP chip that enables high-resolution audio playback and offers 6 pre-set sound quality profiles. The method for switching between these presets is typically controlled by the connected device's audio settings or a dedicated application, if available. Refer to your device's manual or FiiO's official website for specific instructions on accessing and utilizing these presets.

6. Maintenance

Proper care and maintenance will extend the lifespan of your FiiO JD10 Type-C earphones.

Cleaning Ear Tips: Regularly remove the ear tips and clean them with a soft, damp cloth. Ensure they are completely dry before reattaching.
Cleaning Earphone Units: Use a dry, soft cloth to wipe the earphone units. Avoid using harsh chemicals or abrasive materials.
Cable Care: Avoid sharp bends or excessive pulling on the cable. Store the earphones neatly to prevent tangling.
Storage: When not in use, store the earphones in a clean, dry place, preferably in a protective pouch (if included or purchased separately) to prevent dust accumulation and physical damage.
Avoid Moisture: Do not expose the earphones to water or excessive moisture.

7. Troubleshooting

If you encounter issues with your FiiO JD10 Type-C earphones, refer to the table below for common problems and solutions.

Problem	Possible Cause	Solution
No sound or low volume	Earphones not properly connected Device volume too low Incorrect audio output selected on device Ear tips blocked	Ensure Type-C connector is fully inserted. Increase volume on your connected device. Check device audio settings to ensure JD10 is selected as output. Clean ear tips and earphone nozzles.
Sound distortion	Audio source quality is poor Volume too high Damaged cable or earphone unit	Try a different audio source or file. Reduce volume. Inspect cable and earphone units for visible damage. If damaged, contact support.
Remote control not responding	Incompatibility with device Software issue on device	Ensure your device supports in-line remote controls via Type-C. Restart your connected device. Test with another compatible device if possible.
Uncomfortable fit	Incorrect ear tip size Improper earphone placement	Experiment with different ear tip sizes (S, M, L) for the best fit. Adjust the earphone units and cable loop over your ear until comfortable and secure.

8. Specifications

Technical specifications for the FiiO JD10 Type-C In-Ear Monitors:

Feature	Specification
Model Name	JD10 Type-C Black
Item Model Number	FIO-IEM-JD10TC-B
Audio Driver Type	Dynamic Driver
Earpiece Shape	In-Ear
Connectivity Technology	Wired
Hardware Interface	USB Type-C
Headphones Jack	USB-C
Frequency Response	40 KHz
Sensitivity	105 dB
Impedance	32 Ohms
Noise Control	None
Control Method	Remote
Item Weight	7.4 Grams
Manufacturer	FIIO
Supports Bluetooth Technology	No

9. Warranty and Support

Your FiiO JD10 Type-C In-Ear Monitors are covered by a standard manufacturer's warranty. For detailed warranty terms, conditions, and duration, please refer to the warranty card included in your product packaging or visit the official FiiO website.

For technical support, service, or further inquiries, please contact FiiO customer service through their official website or authorized distributors. Keep your purchase receipt as proof of purchase for warranty claims.

Official FiiO Website: www.fiio.com

	FiiO FX15 Electrostatic 1DD 1BA Hybrid In-Ear Monitors User Manual User guide for the FiiO FX15 Electrostatic 1DD 1BA Hybrid In-Ear Monitors, covering wearing instructions, MMCXAssist tool usage, cable connection/disconnection, precautions, authenticity checking, warranty terms, and after-sales service.
	FiiO FX15 Quick Start Guide: Wearing and Connector Instructions A comprehensive guide to wearing FiiO FX15 earphones, including instructions for attaching and detaching cables, using the MMCX assist tool, and understanding warranty terms. Learn how to ensure a comfortable and secure fit for optimal audio experience.
	FiiO FA9 In-Ear Monitors: User Manual, Warranty, and Support Official user manual for FiiO FA9 in-ear monitors. Includes detailed wearing instructions, safety precautions, warranty terms, authenticity verification, after-sales service procedures, and product disposal information.
	FiiO FH11 Quick Start Guide: Wearing, Setup, and Warranty Information Comprehensive quick start guide for FiiO FH11 earphones, covering wearing instructions, cable attachment/detachment, authenticity checking, warranty terms, and after-sales service.
	FIIO FX17 In-Ear Monitor Quick Start Guide and Warranty Information Comprehensive guide for FIIO FX17 HiFi stereo earphones, covering wearing instructions, cable replacement, replaceable plug usage, warranty terms, after-sales service, and product compliance information.
	FiiO FH5s Earphones User Manual and Instructions Comprehensive guide for FiiO FH5s earphones, detailing wearing instructions, cable management, warranty information, authenticity checking, product care, and technical specifications.

FiiO FIO-IEM-JD10TC-B