1. Introduction and Product Overview
This manual provides detailed instructions for the assembly, operation, and maintenance of your Barkan FS420 Bolted Down TV Floor Stand. Please read this manual thoroughly before installation and retain it for future reference. This stand is designed to securely hold TVs ranging from 13 to 83 inches and weighing up to 110 lbs (50 kg).
The Barkan FS420 offers tilt, swivel, and height adjustment features, providing an optimal viewing experience. Its robust iron base is designed to be bolted down for enhanced stability and safety.
Image: The Barkan FS420 Bolted Down TV Floor Stand, shown with its retail packaging. The stand features a sturdy central pole and a flat base, designed to support a television.
2. Safety Information
WARNING: Improper installation or use of this product may result in serious injury or damage. Always follow all instructions carefully. If you are unsure about any part of the installation, consult a qualified professional.
- Ensure the floor stand is securely bolted to the floor to prevent tipping, especially in households with children or pets.
- Do not exceed the maximum weight capacity of 110 lbs (50 kg).
- Verify that your TV's VESA mounting pattern is compatible with the stand (75x75mm to 600x400mm).
- Always use appropriate fasteners for your specific floor type.
- Wear safety glasses during installation.
- Keep children and pets away from the installation area.
Image: A comparison illustrating the safety of the Barkan stand, which is bolted to the floor, next to a competitor's stand that appears less stable. A baby is shown near the bolted Barkan stand, emphasizing child safety.
3. Package Contents and Required Tools
Included in the Package:
- Barkan FS420 TV Floor Stand components
- Assembly instructions, warnings, and safety instructions
- TV screws compatible with 90% of popular TVs
Required Tools (Not Included):
- Hardware to attach to the floor (specific to your floor type)
- Drill
- Safety glasses
- Wrench (3/8" - 10mm)
- Screwdriver (No. 2+3)
Image: A visual guide showing included TV screws and required tools such as a drill, safety glasses, wrench, and screwdriver for the installation process.
4. Specifications
| Feature | Detail |
|---|---|
| Compatible TV Sizes | 13 - 83 inches |
| Maximum Load Capacity | 110 lbs (50 kg) |
| VESA Mounting Patterns | 75x75, 100x100, 100x200, 200x100, 200x200, 200x300, 300x200, 300x300, 300x400, 400x200, 400x300, 400x400, 600x400 mm and non-VESA up to 600x400 mm |
| Height Adjustment Range | 34.3" - 53.1" (87cm - 135cm) from screen center to floor |
| Tilt Angle | -5° to +10° (tool-free) |
| Swivel Angle | 90° (45° left, 45° right) |
| Leveling Adjustment | ±5° |
| Material | Iron (Glossy Black finish) |
| Product Dimensions | 5 x 11 x 29 inches (packaged) |
| Item Weight | 14.13 pounds |
Image: A diagram illustrating the stand's dimensions, height adjustment levels, tilt and swivel ranges, VESA compatibility, and cable management features.
5. Setup and Installation
Follow these steps for a secure and proper installation of your Barkan TV Floor Stand.
Step 1: Connect the TV Plate to the Back of the TV
- Carefully place your TV face down on a soft, clean surface to prevent scratches.
- Identify the VESA mounting holes on the back of your TV.
- Select the appropriate screws and spacers from the included hardware kit that fit your TV's mounting holes.
- Attach the TV plate (the part with the VESA arms) to the back of your TV using the selected screws. Ensure it is securely fastened.
Step 2: Install the Base on the Floor
- Choose the desired location for your TV stand.
- Position the stand's base on the floor and mark the drilling points for the bolts.
- Using a drill, create pilot holes according to the size of your chosen floor fasteners.
- Securely bolt the stand's base to the floor using appropriate hardware for your floor type (e.g., concrete anchors, wood screws). This step is crucial for stability.
Step 3: Snap the TV onto the Stand
- With assistance, carefully lift the TV (with the attached TV plate) and align it with the mounting bracket on the stand's pole.
- Gently lower the TV until the TV plate snaps securely into place on the stand's bracket.
- Ensure the TV is fully seated and locked onto the stand. Some models may have safety screws or clips to further secure the TV.
Image: A visual representation of the three-step assembly process: 1) Connect TV plate, 2) Install base on floor, 3) Snap TV onto stand. It also highlights the need for specific floor fasteners.
VESA Compatibility and Backscreen Connections:
The stand supports various VESA patterns. Refer to the diagram below to identify the correct backscreen connection positioning for your TV. If your TV's connections are not listed, please contact Barkan support.
Image: A grid showing eight different VESA mounting configurations for TV backscreens, indicating compatible hole patterns and adapter usage. It also advises contacting support if a specific pattern is not shown.
6. Operating Instructions (Adjustments)
The Barkan FS420 stand allows for easy adjustment of your TV's position to achieve the best viewing angle.
Height Adjustment:
The stand offers 9 height levels, allowing you to adjust the screen center from 34.3" (87cm) to 53.1" (135cm) from the floor. To adjust the height, loosen the locking mechanism on the pole, slide the TV to the desired height, and then securely tighten the mechanism.
Tilt Adjustment:
The TV can be tilted from -5° (downward) to +10° (upward) without tools. Gently push or pull the top or bottom of the TV to achieve the desired tilt angle. The friction mechanism will hold the TV in place.
Swivel Adjustment:
The TV can swivel up to 90° (45° left and 45° right). Gently push the side of the TV to rotate it to your preferred viewing angle. The stand's design allows for smooth movement.
Leveling Adjustment:
A ±5° leveling adjustment is available to ensure your TV is perfectly horizontal after installation.
Image: A lifestyle image showing a TV mounted on the Barkan floor stand in a living room setting, with annotations highlighting its maximum load capacity, height adjustment range, tilt (0-10 degrees), swivel (90 degrees), and leveling (±5 degrees) capabilities.
Cable Management:
The stand features integrated cable management to keep your cables organized and out of sight. Route your TV and power cables through the central pole for a clean and aesthetic setup.
Image: A composite image detailing the stand's height, tilt, and swivel adjustments, alongside its aesthetic features like glossy metal finish, luxurious design, and integrated cable management.
7. Maintenance
- Regularly check all bolts and screws to ensure they remain tight and secure.
- Clean the stand with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Periodically inspect the stand for any signs of wear or damage. If any issues are found, discontinue use and contact Barkan support.
8. Troubleshooting
- TV not level: Use the ±5° leveling adjustment feature to correct the angle. Ensure all mounting screws are tightened evenly.
- Stand feels unstable: Double-check that the base is securely bolted to the floor using appropriate fasteners. Ensure the TV's weight does not exceed the stand's maximum capacity.
- Difficulty adjusting tilt/swivel: Ensure no cables are obstructing movement. If resistance is too high, check for any overtightened components (though tilt is tool-free, some initial setup might involve tightening).
- Missing parts: If any parts are missing from the package, refer to the "Package Contents" section and contact Barkan customer support immediately.
9. Warranty and Support
Warranty:
This Barkan TV Floor Stand comes with a 5-year warranty. Barkan products undergo strict quality tests and are designed for durability. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
Customer Support:
For any questions, technical assistance, or warranty claims, please visit the Barkan Mounts support website or contact their customer service. You can find more information at www.barkanmounts.com/support.
