tectake Luxurious Design Office Chair User Manual

1. Introduction

Thank you for choosing the tectake Luxurious Design Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before use and retain them for future reference.

Front view of the tectake office chair in white faux leather, showcasing its design and comfortable appearance.

2. Safety Instructions

• Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the chair on a soft, clean surface to prevent scratches.
• Do not stand on the chair. Use it only for sitting.
• Do not exceed the maximum weight capacity (information not provided, assume standard office chair limits, e.g., 120 kg / 265 lbs).
• Keep children and pets away during assembly. Small parts can be a choking hazard.
• Regularly check all screws and connections to ensure they remain tight.

3. Package Contents

Please verify that all the following components are included in your package:

• Backrest (1)
• Seat (1)
• Armrests (2)
• Gas Lift Cylinder (1)
• Star Base (1)
• Casters (5)
• Mechanism Plate (1)
• Hardware Pack (screws, washers, Allen key)
• Instruction Manual (1)

4. Setup (Assembly Instructions)

Follow these steps to assemble your tectake office chair:

1. Attach Casters to Base: Insert the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place.
2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the star base.
3. Attach Mechanism Plate to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the seat. Ensure the front of the mechanism plate faces the front of the seat. Secure with screws from the hardware pack.
4. Attach Armrests to Seat and Backrest: Attach the armrests to the sides of the seat using the provided screws. Then, attach the backrest to the armrests and the seat, securing all connections with screws. Do not overtighten until all screws are in place.
5. Connect Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the tapered end of the gas lift fits securely into the mechanism plate.

5. Operating Instructions

Your tectake office chair is designed for comfort and adjustability. Familiarize yourself with its functions:

5.1. Height Adjustment

To adjust the chair's height, pull the lever located under the right side of the seat upwards. While holding the lever, either stand up to raise the chair or sit down to lower it. Release the lever at your desired height to lock it in place.

5.2. Tilt Function

The chair features a tilt mechanism for reclining. Pull the same lever outwards to enable the tilt function, allowing the chair to rock back and forth. Push the lever inwards to lock the chair in an upright position.

Close-up of the chair's adjustment lever for height and tilt, and a detail of the smooth-rolling casters.

6. Maintenance

Proper care will extend the life of your office chair:

• Cleaning: For the faux leather and plastic parts, wipe with a soft, damp cloth. Use a mild soap solution if necessary, then wipe dry. Avoid harsh chemicals or abrasive cleaners.
• Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten if loose.
• Casters: Keep the casters clean and free of debris (hair, dust) to ensure smooth rolling.

Close-up of the armrest material, showing the faux leather texture and stitching, highlighting the quality of the upholstery.

7. Troubleshooting

If you encounter issues with your chair, refer to the following common problems and solutions:

• Chair does not adjust height: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement.
• Chair wobbles: Check all assembly screws and ensure they are securely tightened. Make sure the gas lift is properly seated in the base and mechanism plate.
• Casters do not roll smoothly: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.
• Squeaking noises: Apply a small amount of silicone lubricant to moving parts or connections if squeaking occurs.

8. Specifications

Key technical details for the tectake Luxurious Design Office Chair:

Diagram illustrating the key dimensions of the office chair for reference.

9. Warranty and Support

For warranty information or technical support, please contact tectake customer service through their official website or the retailer where you purchased the product. Keep your purchase receipt as proof of purchase.