1. Safety Information
Please read all safety instructions carefully before using the VGR V-123 Professional Hair Clipper. Keep this manual for future reference.
- This appliance is intended for household use only.
- Do not immerse the appliance in water. The device is water-resistant for easy cleaning, but not fully waterproof for immersion.
- Keep the appliance away from children.
- Always unplug the clipper from the power outlet immediately after use and before cleaning.
- Do not use the appliance with a damaged cord or plug. If the appliance is not working properly, has been dropped or damaged, return it to a service center.
- Avoid trimming near sensitive areas such as ears and nose without proper care.
- When trimming beards, exercise caution around pimples or skin irritations to prevent injury.
2. Product Overview
The VGR V-123 Professional Hair Clipper is designed for efficient and precise hair trimming and styling. It features durable stainless steel blades and an adjustable taper lever for customized cutting lengths.

Image 1: Overview of the VGR V-123 Hair Clipper highlighting its key components including the taper lever, professional blades, powerful motor, ON/OFF switch, 2m power cord, and LED indicator.
Components:
- Professional Hair Clipper (VGR V-123)
- 4 Guide Combs (3mm, 6mm, 9mm, 12mm)
- Protective Blade Cover
- Cleaning Brush
- Lubricating Oil
- USB Charging Cable (2m length)
- User Manual
3. Setup
- Unpack: Carefully remove all components from the packaging.
- Inspect: Check the clipper and accessories for any signs of damage. Do not use if damaged.
- Initial Charge (if applicable): Although the clipper is corded electric, it may contain a lithium-ion battery for consistent power delivery. Ensure it is connected to a power source before first use. The blue LED indicator will illuminate when the device is operating.
- Lubricate Blades: Before first use, apply a few drops of the included lubricating oil to the blades. Turn on the clipper for a few seconds to distribute the oil.
4. Operating Instructions
4.1 Attaching Guide Combs
Select the desired guide comb for your preferred cutting length (3mm, 6mm, 9mm, or 12mm). Align the comb with the clipper blade and push it firmly until it clicks into place.

Image 2: The four included guide combs (3mm, 6mm, 9mm, 12mm) for adjusting cutting length.
4.2 Adjusting the Taper Lever
The adjustable taper lever allows for fine-tuning cutting lengths without changing guide combs. Move the lever up for a closer cut (0.8mm) and down for a longer cut (2mm).

Image 3: The taper lever on the side of the clipper, allowing for precise blade adjustments between 0.8mm and 2mm for closest and longest cuts.
4.3 Trimming Hair
- Ensure your hair is clean and dry for best results.
- Connect the clipper to a power outlet. The blue LED indicator will light up.
- Turn on the device using the power switch.
- Begin trimming your hair or beard, moving the clipper slowly and steadily against the direction of hair growth.
- Use smooth, overlapping strokes to ensure an even cut.

Image 4: A user demonstrating the VGR V-123 hair clipper in action, trimming hair on the head.
5. Maintenance
Proper maintenance ensures the longevity and optimal performance of your VGR V-123 hair clipper.
- Cleaning Blades: After each use, turn off and unplug the clipper. Remove the blade assembly by gently pushing it forward. Use the cleaning brush to remove any loose hairs from the blades and the clipper body.
- Rinsing Blades: The blades are water-resistant. Rinse the detached blades under running water to remove stubborn hair and debris.
- Drying Blades: Ensure the blades are completely dry before reattaching them to the clipper body. Air dry or use a soft cloth.
- Lubricating Blades: After cleaning and drying, apply 1-2 drops of the lubricating oil to the blades. Turn on the clipper for a few seconds to distribute the oil evenly. This helps maintain blade sharpness and reduces friction.
- Storage: Store the clipper in a dry, cool place, away from direct sunlight and moisture. Use the protective blade cover to prevent damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on. | Not plugged in correctly; Power outlet issue. | Ensure the power cord is securely plugged into both the clipper and a working power outlet. |
| Clipper pulls hair or cuts unevenly. | Blades are dull or dirty; Insufficient lubrication; Hair is too thick or wet. | Clean and lubricate the blades. Ensure hair is dry. Move the clipper slower. |
| Blades get hot during use. | Extended use; Lack of lubrication; Dirty blades. | Turn off the clipper and allow it to cool. Clean and lubricate the blades. Avoid continuous long periods of use. |
| Excessive noise during operation. | Blades not properly aligned or lubricated. | Check blade alignment. Clean and lubricate the blades. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | V-123 |
| Brand | VGR |
| Power Source | Corded Electric |
| Blade Material | Stainless Steel |
| Body Material | Stainless Steel |
| Special Feature | LED Indicator |
| Item Dimensions (L x W x H) | 23 x 13 x 7 cm |
| Item Weight | 590 grams |
| Color | Black |
| Minimum Cutting Length | 0.8 mm (with taper lever) / 3 mm (with shortest comb) |
| Maximum Cutting Length | 12 mm |
| Guide Combs Included | 4 (3mm, 6mm, 9mm, 12mm) |
| Battery | 1 Lithium Ion battery required (included) |
| Target Audience | Men, Adults of both genders |
| Specific Uses For Product | Head, Beard, Body, and Pets |
8. Warranty Information
For warranty details, please refer to the specific warranty card included with your product or your purchase documentation. Warranty terms and conditions may vary by region and retailer.
9. Customer Support
If you have any questions, concerns, or require assistance with your VGR V-123 Professional Hair Clipper, please contact the retailer where you purchased the product or the manufacturer's customer service department. Contact information can typically be found on the product packaging or the manufacturer's official website.