1. Product Overview
This instruction manual provides detailed information on the assembly, operation, and maintenance of your DWIN Bey Battling Toys Burst Booster GT Starter B-133 DX Ace Dragon Sting Charge Zan St.Ch Battle Set. This set includes a Beyblade spinning top, a custom string launcher, and a grip, designed for competitive battling.
Figure 1: Complete DWIN Bey Battling Set components.
2. Safety Information
Please read and understand all safety warnings before use. Failure to do so may result in injury.
- Recommended Age: This product is recommended for ages 6 years and up. Small parts may pose a choking hazard for younger children.
- Supervision: Adult supervision is recommended during play, especially for younger users.
- Eye Protection: Consider wearing eye protection during battles to prevent injury from ricocheting tops.
- Play Area: Use in an open area, away from obstacles, people, and pets. Do not launch tops near faces or eyes.
- Modifications: Do not modify the product in any way. Unauthorized modifications may compromise safety and performance.
- Damage: Discontinue use if any part of the product becomes damaged.
3. What's in the Box
Verify that all components are present before assembly and use:
- 1 x Beyblade Spinning Top (B-133 DX Ace Dragon Sting Charge Zan St.Ch)
- 1 x Custom String Launcher (LR Left+Right Spin)
- 1 x Launcher Grip
Figure 2: Beyblade components and sticker sheet.
4. Setup and Assembly
4.1 Beyblade Assembly
Assemble the Beyblade spinning top by combining its three main parts: the Energy Layer, Forge Disc, and Performance Tip. Ensure they click securely into place.
Figure 3: Assembled Beyblade spinning top.
4.2 Launcher and Grip Assembly
The custom string launcher and grip provide stability and power for launching your Beyblade.
- Attach the Launcher to the Grip: Slide the string launcher (part B) onto the launcher grip (part C) until it clicks into place. Ensure the connection is firm.
- Insert the Ripcord: For string launchers, ensure the string is fully retracted.
Figure 4: Launcher and Grip Assembly.
Figure 5: Detailed Launcher Assembly Steps.
5. Operating Instructions
5.1 Attaching the Beyblade to the Launcher
- Hold the assembled launcher firmly with one hand.
- Align the Beyblade with the launcher's prongs. The Beyblade has specific grooves that fit onto the launcher.
- Twist the Beyblade clockwise or counter-clockwise (depending on its spin direction, this launcher supports both Left and Right spin) until it locks securely onto the launcher. You should hear a click.
5.2 Launching the Beyblade
- Stand over a Beyblade stadium or a clear, flat surface.
- Hold the launcher at arm's length, aiming towards the center of the battle area.
- Pull the string on the launcher with a swift, strong motion. The Beyblade will detach and spin rapidly.
- Ensure your hand is clear of the Beyblade's path after launching.
Figure 6: Beyblade in action.
6. Maintenance and Care
- Cleaning: Wipe the Beyblade and launcher with a dry, soft cloth to remove dust and debris. Do not use water or cleaning solutions, as this may damage the components.
- Storage: Store the Beyblade set in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Regularly inspect the Beyblade and launcher for any signs of wear or damage. Replace parts if necessary.
- String Launcher Care: Avoid pulling the string launcher cord excessively or letting it snap back uncontrolled, as this can damage the internal mechanism.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Beyblade does not spin or spins weakly. |
|
|
| Launcher string gets stuck or does not retract. |
|
|
| Beyblade detaches from launcher prematurely. |
|
|
8. Specifications
- Product Name: DWIN Bey Battling Toys Burst Booster GT Starter B-133 DX Ace Dragon Sting Charge Zan St.Ch Battle Set
- Model Number: B-133
- Brand: DWIN
- Manufacturer: THYS
- Recommended Age: 6 years and up
- Spin Type: Left+Right Spin (Launcher)
9. Warranty and Support
This product is manufactured by THYS. For any questions, quality problems, or support inquiries regarding your DWIN Bey Battling Toys set, please contact the seller or manufacturer directly through your purchase platform. Please retain your proof of purchase for any warranty claims.
While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects in materials and workmanship. Refer to your purchase documentation or contact the seller for more information.
