PawHut USD10-0690131

PawHut Bird Play Stand User Manual

Model: USD10-0690131

1. Introduction

Thank you for choosing the PawHut Bird Play Stand. This portable perch and feeder station is designed to provide a comfortable and engaging environment for your bird. It features multiple perches, feeding bowls, and a mess-containing tray, all on a wheeled base for easy relocation.

Please read this manual thoroughly before assembly and use to ensure proper setup and safe operation.

PawHut Bird Play Stand with perches, feeding bowls, and a round tray on wheels.

Image 1.1: The PawHut Bird Play Stand, featuring a central pole with multiple wooden perches, two stainless steel feeding bowls, a large round tray, and a wheeled base.

2. Safety Instructions

  • Ensure all parts are securely fastened before allowing your bird to use the stand.
  • Regularly inspect the stand for any loose or damaged components. Replace or repair as necessary.
  • Keep the stand on a level surface to prevent tipping.
  • Do not overload the stand with excessive weight.
  • Keep small children and other pets supervised around the bird stand.
  • Clean the stand regularly to maintain a hygienic environment for your bird.

3. Package Contents

Please verify that all components listed below are present in your package:

  • Main Support Pole
  • Base with Wheels (4x)
  • Round Tray
  • Horizontal Perch (1x)
  • Vertical Perches (3x)
  • Stainless Steel Feeding Bowls (2x)
  • Assembly Hardware (screws, washers, wrench)

4. Assembly and Setup

Assembly is required for this product. Follow these steps carefully:

  1. Attach the Wheels to the Base: Securely fasten the four wheels to the cross-shaped base using the provided hardware. Ensure they are tightly attached for stability and smooth movement.
  2. Connect the Main Support Pole: Attach the main support pole to the center of the wheeled base. Use the appropriate screws and tighten them firmly.
  3. Install the Round Tray: Slide the large round tray onto the main support pole. Ensure it rests securely at the designated height. The high-edge design helps contain debris.
  4. Attach the Perches: Insert the wooden perches into the pre-drilled holes on the main support pole. The stand includes one horizontal perch and three smaller vertical perches for varied bird activity.
  5. Place the Feeding Bowls: Position the two stainless steel feeding bowls into the designated holders on the horizontal perch. These bowls are for food and water.
Close-up of the PawHut Bird Play Stand's wheeled base and the overall structure.

Image 4.1: Detail of the four universal wheels for easy movement and the sturdy metal frame construction.

Close-up view of the PawHut Bird Play Stand showing the two stainless steel bowls, the high-edge tray, and the wooden perches.

Image 4.2: Components of the play stand including the feeding bowls, the mess-collecting tray, and the various perches.

5. Operating Instructions

The PawHut Bird Play Stand is designed for ease of use and bird comfort.

  • Placement: Position the stand in a safe, comfortable area for your bird. The wheels allow for easy relocation between rooms or even outdoors (ensure supervision).
  • Feeding and Hydration: Fill the two stainless steel bowls with fresh food and water daily.
  • Bird Interaction: Encourage your bird to use the various wooden perches for play, rest, and exercise.
  • Mess Management: The wide, high-edge round tray is designed to catch dropped food, seeds, and droppings, minimizing mess around the stand.
A bird perched on the PawHut Bird Play Stand, demonstrating its use for resting and feeding.

Image 5.1: A bird comfortably using the play stand, highlighting the perches and feeding bowls.

Video 5.1: An overview of the PawHut Bird Play Stand, showcasing its features and portability. This video is provided by Aosom Direct, the manufacturer.

6. Maintenance and Care

Regular cleaning and maintenance will extend the life of your bird stand and ensure a healthy environment for your pet.

  • Daily Cleaning: Empty and wash the stainless steel feeding bowls daily with warm, soapy water. Rinse thoroughly.
  • Tray Cleaning: The high-edge tray is easy to clean. Wipe it down daily with a damp cloth to remove droppings and food debris. For deeper cleaning, remove the tray and wash with mild soap and water, then dry completely before reattaching.
  • Perch Cleaning: Wipe wooden perches with a damp cloth. For stubborn stains, a mild bird-safe disinfectant can be used, followed by thorough rinsing and drying.
  • Frame Cleaning: Wipe the metal frame with a damp cloth as needed. Avoid abrasive cleaners that could damage the finish.
  • Wheel Maintenance: Periodically check the wheels for any accumulated debris (feathers, food) that might hinder smooth movement. Clean as necessary.
Close-up of the textured finish on the PawHut Bird Play Stand's tray.

Image 6.1: The textured surface of the round tray, designed for durability and ease of cleaning.

7. Troubleshooting

If you encounter any issues with your PawHut Bird Play Stand, refer to the following common solutions:

ProblemPossible CauseSolution
Stand feels unstable or wobbly.Loose connections; uneven surface.Check and tighten all screws and bolts. Ensure the stand is on a flat, level surface.
Wheels do not roll smoothly.Debris in wheels; wheels not properly installed.Clean any debris from the wheel casters. Verify wheels are securely attached and can swivel freely.
Bird is not using the perches.New environment; perches are too high/low for the bird.Allow time for your bird to adjust. Ensure the perches are at a comfortable height and diameter for your specific bird species. Offer treats on the perches to encourage use.
Food/water bowls fall out.Bowls not seated correctly.Ensure bowls are fully inserted and seated firmly in their holders.

8. Specifications

FeatureDetail
Model NumberUSD10-0690131
Overall DimensionsØ23.5" x 43.75"H
Round Tray DimensionsØ23.5" x 1.5"H
Feeding Bowl DimensionsØ4.25" x 1.75"H
MaterialsMetal, Stainless Steel, Wood
ColorGrey
Item Weight7.04 pounds
Special FeaturesEasy to Clean, High-edged Tray, Wheeled
Assembly RequiredYes
Diagram showing the dimensions of the PawHut Bird Play Stand, including height, tray diameter, and perch length.

Image 8.1: Detailed dimensions of the bird play stand for reference.

9. Warranty and Support

For warranty information, please refer to the documentation included with your purchase or contact PawHut customer service directly. You can also visit the official PawHut store for additional product information and support.

Visit the PawHut Store on Amazon

© 2023 PawHut. All rights reserved.

Related Documents - USD10-0690131

Preview PawHut Elevated Dog Bowls with Storage Drawer Assembly Instructions
Comprehensive guide for assembling the PawHut Elevated Dog Bowls with Storage Drawer (Model D08-039V00), including parts list, hardware, and step-by-step instructions.
Preview PawHut Pet Feeder with Storage Drawer - Assembly Instructions
Comprehensive assembly guide for the PawHut Pet Feeder with Storage Drawer. Includes parts list, hardware details, and step-by-step instructions for models D08-041V00, D08-041V01, and D08-041V80.
Preview PawHut Large Bird Cage with Stand and Wheels - Assembly and Usage Guide
Comprehensive guide for assembling and using the PawHut Large Bird Cage with Stand and Wheels (Model D10-019V01). Includes parts list, assembly steps, and usage instructions.
Preview PawHut Elevated Dog Bowls with Storage Cabinet Assembly Instructions
Step-by-step assembly guide for the PawHut Elevated Dog Bowls with Storage Cabinet (Model D08-040V00). Includes parts list, hardware, and assembly instructions with diagrams described in text.
Preview PawHut Raised Dog Bowls with Locker Assembly Instructions
Concise assembly instructions for the PawHut Raised Dog Bowls with 44L Locker, featuring stainless steel bowls and a white finish. Includes a step-by-step guide with part identification.
Preview PawHut Elevated Dog Bowls with Storage - Assembly Manual
Comprehensive assembly instructions and user guide for the PawHut Elevated Dog Bowls with Storage (Model D08-035V00). Includes parts list, hardware details, step-by-step assembly, and contact information for various regions.