Introduction
Welcome to your new Danby Portable Air Conditioner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your unit.
The Danby DPA100B9IWDB-6 is a versatile 3-in-1 unit, functioning as an air conditioner, fan, and dehumidifier, designed to cool spaces up to 500 square feet. It features a dual hose design for maximum cooling efficiency and smart control capabilities for convenient operation.
Important Safety Information
Please read all instructions carefully before operating this appliance.
- Always ensure the unit is placed on a stable, level surface.
- Do not block air inlets or outlets.
- Use only with a properly grounded electrical outlet.
- Do not operate if the power cord is damaged.
- Keep out of reach of children.
- Refer to the full safety guidelines in the printed manual for comprehensive details.
Product Features
- Convenient 3-in-1 design: air conditioner, fan, and dehumidifier.
- 10,000 SACC Portable Air Conditioner cools spaces up to 500 sq. ft.
- Dual Hose design: Innovative new design ensures minimum heat leakage and maximum cooling.
- Smart Control: Control the temperature in your space anytime, from anywhere with the voice control feature.
- R32 Refrigerant: Environmentally friendly, R32’s GWP (Global Warming Potential) is 3x lower than R410a.
- Electronic Controls with LED display and remote control.
- Air Vent angle is 80-degree’s wider than older models and provides stronger air flow that reaches further and cools quicker.
- Inverter Compressor: Super quiet and efficient.
- Auto Restart: Unit automatically restarts after a power failure.
- Easy to move: Castors and Integrated handles for easy room-to-room transport.
Parts Identification
Familiarize yourself with the components of your Danby Portable AC unit.
Figure 1: Front view of the Danby DPA100B9IWDB-6 Portable AC unit, showcasing its sleek white design and top control panel.
Figure 2: Close-up of the top control panel with LED display and various function buttons for power, mode, fan speed, temperature adjustment, timer, and Wi-Fi connectivity.
Figure 3: Side view of the unit illustrating its dimensions: 17 inches deep, 19 inches wide, and 32 inches high, with the dual hose connection visible at the back.
Figure 4: Rear view of the portable AC, highlighting the dual hose connections for efficient air intake and exhaust, and the power cord.
Setup and Installation
Your Danby Portable AC is designed for easy setup. Follow these steps for optimal performance.
Unpacking
- Carefully remove the unit and all accessories from the packaging.
- Check for any shipping damage. Contact customer support if any damage is found.
- Retain original packaging for future storage or transport.
Window Kit Installation
The unit comes with an adjustable window kit for venting.
- Assemble the window slide kit according to the diagrams in the full manual.
- Insert the exhaust hoses into the window kit and secure them.
- Place the window kit in your window opening and extend it to fit securely.
- Connect the hoses to the rear of the portable AC unit. Ensure connections are tight to prevent air leakage.
Placement
- Place the unit on a firm, level surface.
- Ensure there is at least 20 inches (50 cm) of space around the unit for proper airflow.
- Avoid placing the unit in direct sunlight or near heat sources.
Operating Instructions
Your portable AC unit can be controlled via the electronic control panel on top of the unit or the included remote control.
Control Panel Overview
The control panel features an LED display and various buttons:
- Power Button: Turns the unit ON or OFF.
- Mode Button: Cycles through Air Conditioner, Fan, and Dehumidifier modes.
- Fan Speed Button: Adjusts fan speed (Low, Medium, High, Auto).
- Temperature Up/Down Buttons: Adjusts the desired temperature setting.
- Timer Button: Sets the auto-on or auto-off timer.
- Wi-Fi Button: Activates Wi-Fi for Smart Control features.
Modes of Operation
Air Conditioner Mode
Provides cooling for your space. Set desired temperature using the Up/Down arrows.
Fan Mode
Circulates air without cooling. Adjust fan speed as needed.
Dehumidifier Mode
Removes excess moisture from the air. The unit will automatically manage humidity levels. Ensure continuous drainage is set up if using this mode for extended periods.
Smart Control Features
Utilize the Smart Control feature to operate your unit remotely via voice control or a compatible app. Refer to the full manual for detailed instructions on connecting to your smart home system.
Maintenance
Regular maintenance ensures optimal performance and longevity of your unit.
Air Filter Cleaning
- The air filter should be cleaned every two weeks or more frequently depending on usage.
- Turn off and unplug the unit before cleaning.
- Remove the air filter from the back of the unit.
- Wash the filter with warm, soapy water. Rinse thoroughly and allow to air dry completely before reinserting.
Water Drainage
- The unit has an internal water collection tank. When full, the unit will stop operating and display an error code.
- Place a shallow pan under the drainage port at the back of the unit.
- Remove the drain plug to allow water to flow out.
- For continuous drainage (especially in dehumidifier mode), connect a drain hose (not included) to the drainage port and direct it to a floor drain.
Storage
- Before storing, drain all water from the unit.
- Clean the air filter.
- Disconnect and store the window kit and hoses.
- Cover the unit to protect it from dust. Store in a cool, dry place.
Troubleshooting
Before contacting customer service, try the following solutions for common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on | No power; Power cord unplugged; Full water tank | Check power connection; Plug in securely; Drain water tank |
| Unit not cooling effectively | Dirty air filter; Room too large; Doors/windows open; Exhaust hose not properly installed | Clean air filter; Ensure room size is within capacity; Close all openings; Check hose connections |
| Unit is noisy | Unit not level; Obstruction in fan; Normal operation sound | Place on level surface; Check for obstructions; Some noise is normal for portable ACs |
Specifications
| Feature | Detail |
|---|---|
| Model Number | DPA100B9IWDB-6 |
| Cooling Capacity | 12,000 BTU (10,000 SACC) |
| Coverage Area | Up to 500 sq. ft. |
| Dimensions (D x W x H) | 17 x 19 x 32 inches |
| Item Weight | 80 pounds |
| Voltage | 115 Volts |
| Noise Level | 53.5 dB |
| Refrigerant | R32 |
| Included Components | Remote Control, Owners Manual |
Warranty and Customer Support
Warranty Information
This Danby product is covered by a 24-month parts and labor warranty. This warranty covers defects in materials and workmanship under normal use.
Please note: Installation and/or yearly maintenance (cleaning) are not covered under this warranty.
Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please visit the official Danby website or contact their customer support line. Keep your proof of purchase and model number readily available.
