FELICON Wireless Gaming Mouse User Manual

Introduction

Welcome to the user manual for your FELICON Wireless Gaming Mouse. This guide provides detailed instructions on setting up, operating, maintaining, and troubleshooting your new mouse to ensure optimal performance and longevity.

This mouse features adjustable DPI, colorful LED backlighting, a silent click design, and 2.4GHz wireless connectivity, offering a precise and comfortable experience for both gaming and general computing tasks.

Package Contents

• FELICON Wireless Gaming Mouse
• USB Nano Receiver
• Charging Cable (USB-A to Micro USB)
• User Manual (this document)

Product Overview

Familiarize yourself with the various components of your FELICON Wireless Gaming Mouse.

• Left Button: Standard left-click function.
• Right Button: Standard right-click function.
• Scroll Wheel: For vertical scrolling and middle-click.
• DPI+ Button: Increases DPI sensitivity.
• DPI- Button: Decreases DPI sensitivity.
• Forward Button: Navigates forward in web browsers or applications.
• Back Button: Navigates backward in web browsers or applications.
• ON/OFF/Light On Switch: Located on the bottom of the mouse, controls power and LED backlight.
• Nano Receiver: Small USB receiver for wireless connectivity.

Setup

Charging the Mouse

The FELICON Wireless Gaming Mouse comes with a built-in rechargeable lithium battery. Before first use, it is recommended to fully charge the mouse.

1. Connect the charging cable to the charging port on the front of the mouse.
2. Connect the other end of the charging cable to a USB power source (e.g., computer USB port, USB wall adapter).
3. The LED backlight may indicate charging status (e.g., solid light while charging, off when fully charged).

The mouse can be used while charging. A full charge provides approximately 30 hours with lights on or 50 hours with lights off.

Connecting the Mouse

The mouse uses 2.4GHz wireless technology for connection.

1. Locate the USB Nano Receiver, usually stored in a compartment on the bottom of the mouse.
2. Insert the Nano Receiver into an available USB port on your computer (PC, Laptop, Mac, etc.).
3. Turn on the mouse using the ON/OFF/Light On switch located on the bottom. Slide the switch to the "ON" position or "Light On" position if you desire the LED backlight.
4. Your computer should automatically detect and install the necessary drivers. The mouse is ready for use once detected.

Operating the Mouse

Adjusting DPI Sensitivity

The mouse features three adjustable DPI levels (1200/1800/2400) to suit different tasks and gaming preferences.

To change the DPI:

• Press the DPI+ button to cycle through DPI settings in ascending order.
• Press the DPI- button to cycle through DPI settings in descending order.

Each press will switch to the next DPI level, allowing you to quickly adjust cursor speed and precision.

Controlling LED Backlight

The mouse features a colorful LED breathing backlight.

To turn off the backlight, slide the ON/OFF/Light On switch on the bottom of the mouse to the "OFF" position. To turn it back on, slide it to the "Light On" position.

The backlight colors change automatically and do not stay on one color.

Power Saving Mode

To conserve battery life, the mouse is designed with intelligent power-saving features:

• The backlight will turn off if the mouse is not used for 1 minute.
• The mouse will enter a deep sleep state if not operated for 15 minutes.

To wake the mouse from sleep, simply click any button.

Maintenance

Cleaning

To clean your mouse, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the internal components. Avoid using harsh chemicals or abrasive cleaners.

Battery Care

To prolong the life of the built-in rechargeable battery:

• Avoid fully discharging the battery frequently.
• Store the mouse in a cool, dry place when not in use for extended periods.
• Do not expose the mouse to extreme temperatures.

Troubleshooting

Mouse not responding:

• Ensure the Nano Receiver is securely plugged into a USB port.
• Check if the mouse is turned on (ON/OFF/Light On switch).
• Recharge the mouse if the battery is low.
• Try plugging the Nano Receiver into a different USB port.
• Restart your computer.

Cursor movement is erratic or slow:

• Adjust the DPI sensitivity using the DPI buttons.
• Ensure the mouse sensor is clean and free of debris.
• Use the mouse on a clean, non-reflective surface.
• Check for interference from other wireless devices.

LED backlight is off:

• Ensure the ON/OFF/Light On switch is in the "Light On" position.
• The mouse may be in power-saving mode; click a button to wake it.
• The battery might be low; recharge the mouse.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the official FELICON website. Keep your proof of purchase for warranty claims.