MEIHUA SWL-FL01 60W 12000mAh Rechargeable LED Work Light User Manual

1. Introduction

Thank you for choosing the MEIHUA SWL-FL01 Rechargeable LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your device. Please read it thoroughly before use and retain it for future reference.

This portable LED work light is designed for various applications, including camping, construction sites, garage work, fishing, and emergency situations. It features multiple lighting modes, adjustable brightness, and versatile charging options.

2. Product Components

Familiarize yourself with the different parts of your MEIHUA LED Work Light:

Image 2.1: Detailed view of the MEIHUA SWL-FL01 LED Work Light, highlighting its components. Key parts include the LED SMD lamp beads, output port (USB-A), input port (USB-C), lighting mode button, on/off button, adjustment knob for the stand, built-in magnet, solar panel, solar panel charging indicator, and battery indicator.

• LED SMD Lamp Beads: The primary light source.
• Output Port (USB-A): For charging external devices (power bank function).
• Input Port (USB-C): For charging the work light via USB cable.
• Lighting Mode Button: Cycles through different light modes.
• On/Off & Brightness Adjustment Button: Powers the device and adjusts brightness levels.
• Adjustment Knob for Stand: Allows 180-degree rotation of the stand for various angles.
• Built-in Magnet: For attaching the light to metallic surfaces.
• Solar Panel: For solar charging.
• Solar Panel Charging Indicator: Shows charging status when using solar power.
• Battery Indicator: Displays the remaining battery level.
• Mounting Hole for Tripod: For securing the light to a tripod (tripod not included).

3. Features

The MEIHUA SWL-FL01 LED Work Light offers a range of features for versatile use:

Image 3.1: Overview of the MEIHUA work light's key features, including a 12000mAh battery, 2A fast charge, solar power capability, suitability for tripods, and magnetic design.

• Constant Current Lighting: Maintains consistent brightness (e.g., 3000 lumens for 10 hours) without dimming as the battery discharges, unlike constant voltage systems.
• Multiple Lighting Modes: Features 4 distinct lighting modes:
  • Warm Light (2700K)
  • Natural Light (4000K)
  • Cold Light (6000K)
  • SOS Flash Mode (Red and Blue flashing for emergencies)
• Adjustable Brightness: Offers 5 levels of brightness (100%, 75%, 50%, 25%, 10%) to suit various needs.
• Dual Charging Options: Can be charged via the integrated solar panel or a USB-C cable.
• Power Bank Function: Equipped with a 12000mAh battery, allowing it to charge other devices like smartphones or tablets via its USB-A output port.
• Magnetic Base: Strong built-in magnets on both sides enable secure attachment to metallic surfaces.
• 180-Degree Adjustable Stand: The integrated stand can be rotated 180 degrees for flexible positioning and illumination angles.
• IP44 Waterproof Rating: Provides protection against splashing water from any direction, making it suitable for outdoor use in light rain.
• Portable Design: Compact and lightweight (490g) with a comfortable handle for easy transport.

Image 3.2: The work light is rated IP44 waterproof, indicating its resistance to splashing water.

Image 3.3: The integrated stand allows for 180-degree adjustment, providing flexible lighting angles.

4. Setup

The MEIHUA LED Work Light requires minimal setup before first use.

4.1 Initial Charge

Before initial use, it is recommended to fully charge the work light using the USB-C cable. This ensures the internal battery is conditioned and ready for optimal performance.

1. Connect the provided USB-C cable to the input port on the work light.
2. Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer USB port.
3. The battery indicator lights will illuminate, showing the charging progress. All lights will be solid when fully charged.

4.2 Positioning the Work Light

The work light offers several positioning options:

• Freestanding: Use the adjustable stand to place the light on a flat surface. Adjust the stand to achieve the desired angle.
• Magnetic Attachment: Attach the light to any suitable metallic surface using the built-in magnets. Ensure the surface is clean and strong enough to hold the light securely.
• Tripod Mounting: Secure the light to a compatible tripod using the mounting hole.

Image 4.1: The work light can be positioned using its 180-degree adjustable stand, attached to metal surfaces via magnets, or mounted on a tripod.

5. Operating Instructions

5.1 Powering On/Off and Brightness Adjustment

1. Press the On/Off & Brightness Adjustment Button once to turn on the light at its last used brightness setting.
2. While the light is on, press the On/Off & Brightness Adjustment Button repeatedly to cycle through the 5 brightness levels (100% > 75% > 50% > 25% > 10%).
3. Press and hold the On/Off & Brightness Adjustment Button for approximately 2 seconds to turn off the light.

5.2 Adjusting Light Modes

The work light features 4 distinct light modes:

Image 5.1: Illustration of the four light modes (Warm, Natural, Cold, SOS) and five brightness levels available on the MEIHUA work light.

1. With the light on, press the Lighting Mode Button once to switch to the next light mode.
2. The modes cycle in the following order: Warm Light > Natural Light > Cold Light > SOS Flash Mode.
3. To exit SOS Flash Mode, press the Lighting Mode Button again to return to Warm Light, or turn off the device.

5.3 Charging the Work Light

Your work light can be charged using two methods:

Image 5.2: The work light supports both USB-C cable charging and solar panel charging. The solar panel automatically charges when exposed to sunlight.

• USB-C Charging: Connect the provided USB-C cable to the input port and a power source. This is the fastest charging method.
• Solar Charging: Place the work light with the solar panel facing direct sunlight. The solar panel charging indicator will flash during charging. Solar charging is slower and dependent on sunlight intensity.

The battery indicator lights will show the current charge level. Ensure timely charging when the battery level is low.

5.4 Power Bank Function

The work light can serve as a power bank to charge other devices:

Image 5.3: The MEIHUA work light can charge external devices like tablets, functioning as a 12000mAh power bank.

1. Connect your device's charging cable to the USB-A output port on the work light.
2. The work light will begin charging your device.
3. Monitor the battery indicator lights on the work light to ensure sufficient power for both the light and your external device.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your MEIHUA LED Work Light.

• Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the solar panel is clean for efficient charging.
• Storage: Store the work light in a cool, dry place when not in use. If storing for extended periods, charge the battery every 3-6 months to maintain battery health.
• Water Exposure: While IP44 rated, avoid submerging the light in water. Dry thoroughly if exposed to rain.
• Battery Care: Do not attempt to replace the internal lithium-polymer battery. Dispose of the product responsibly according to local regulations when it reaches its end of life.

7. Troubleshooting

If you encounter issues with your MEIHUA LED Work Light, refer to the following common problems and solutions:

8. Specifications

Technical specifications for the MEIHUA SWL-FL01 LED Work Light:

Image 8.1: Dimensions of the MEIHUA SWL-FL01 work light: 15.4 cm (6.1 in) length, 11.4 cm (4.5 in) width, and 3.2 cm (1.26 in) thickness.

For detailed energy efficiency information, please refer to the EPREL database: https://eprel.ec.europa.eu/qr/979543

9. Warranty and Support

Your MEIHUA SWL-FL01 Rechargeable LED Work Light comes with a 12-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.

Additionally, a 30-day return policy is offered, allowing you to return the product within 30 days of receipt if you are not satisfied.

Customer Support

If you have any questions, require assistance, or need to claim warranty service, please do not hesitate to contact our customer support team. Please have your purchase details and model number (SWL-FL01) ready when contacting support.

Contact information for customer support can typically be found on the retailer's website or your purchase invoice.