DS. DISTINCTIVE STYLE 1/6 Scale Action Figure Display Stand Instruction Manual

1. Introduction

This manual provides instructions for the assembly, operation, and maintenance of your DS. DISTINCTIVE STYLE 1/6 Scale Action Figure Display Stand. This stand is designed to securely display 12-inch action figures, offering adjustable height and two types of figure clips for versatile posing.

2. Package Contents

Please verify that all components are present before proceeding with assembly:

• 1x Oval Base
• 1x Adjustable Support Rod (Post)
• 1x U-Clip (Crotch/Arm Hook)
• 1x C-Clip (Waist/Neck Hook)

Figure 2.1: All components of the display stand, including the base, adjustable rod, and both U and C clips.

3. Setup and Assembly

Follow these steps to assemble your action figure display stand:

1. Insert the Support Rod: Carefully insert the bottom end of the adjustable support rod into the designated hole in the center of the oval base. Ensure it is seated firmly.
2. Choose a Clip: Select either the U-Clip or the C-Clip based on your figure's posing requirements. The U-Clip is generally used for crotch or arm support, while the C-Clip is suitable for waist or neck support.
3. Attach the Clip: Insert the chosen clip into the top opening of the adjustable support rod.
4. Adjust Height: The support rod allows for height adjustment. Gently pull or push the inner rod to achieve the desired height for your figure. The stand can adjust from approximately 13 cm (5.1 inches) to 21 cm (8.2 inches).

Figure 3.1: Illustration of the adjustable height feature of the display stand.

Note: When inserting the support rod into the base, apply gentle, even pressure to prevent stress on the plastic components. If the rod feels loose, ensure it is fully inserted.

4. Operating Instructions

Once assembled, the display stand is ready for use:

1. Position the Figure: Place your 12-inch action figure onto the stand.
2. Secure with Clip: Carefully position the U-Clip or C-Clip to support the figure. The U-Clip is designed to cradle the figure's crotch or arms, while the C-Clip wraps around the waist or neck. Adjust the clip's position to ensure a snug, secure fit without causing damage to the figure.
3. Balance and Stability: Ensure the figure is balanced on the stand to prevent tipping. Adjust the figure's pose and the stand's height as needed for optimal stability. The clips are designed to be unobtrusive, allowing for dynamic poses.

Figure 4.1: An action figure securely displayed on the stand using a clip.

5. Maintenance

To ensure the longevity and appearance of your display stand:

• Cleaning: Wipe the stand with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners or solvents, as these may damage the painted finish.
• Storage: Store the stand in a cool, dry place away from direct sunlight when not in use.
• Inspection: Periodically check the clips and rod for any signs of wear or damage.

6. Troubleshooting

If you encounter issues with your display stand, refer to the following common solutions:

• Stand is Unstable or Figure Falls:
  • Ensure the support rod is fully and securely inserted into the base.
  • Verify that the figure is properly balanced on the stand and the clip is holding it firmly.
  • Adjust the height of the stand to a lower position if the figure is top-heavy or in an extreme pose.
• Support Rod Appears to Split:
  • This can occur if excessive force is used during assembly or if the plastic is stressed. While the stand may still function, consider reinforcing the split area with a small amount of adhesive if stability is compromised.
• Clips Damaging Figure:
  • Inspect the clips for any sharp edges or imperfections. If found, gently smooth them with fine-grit sandpaper or a small file to prevent scratching or tearing your figure's material.
  • Ensure the clip is not overly tight on the figure. Adjust its position to provide support without undue pressure.

7. Specifications

8. Warranty and Support

For warranty information, product support, or to inquire about replacement parts, please refer to the product packaging or contact DS. DISTINCTIVE STYLE directly through their official customer service channels. Keep your purchase receipt for any warranty claims.