Midea OBODE A8+ Robot Vacuum and Mop Cleaner

1. Introduction

The Midea OBODE A8+ is an advanced robot vacuum and mop cleaner designed to provide efficient and autonomous floor cleaning. Featuring LiDAR navigation for precise mapping, powerful 4000Pa suction, and an intelligent auto-empty station, this device simplifies your cleaning routine. It offers 2-in-1 vacuuming and mopping capabilities with automatic mop lifting for carpets, ensuring thorough cleaning across various floor types.

The OBODE A8+ Robot Vacuum and Mop Cleaner in a modern home environment.

2. Setup

2.1. What's in the Box

Upon unboxing your Midea OBODE A8+, ensure all components are present:

• OBODE A8+ Robot Vacuum and Mop Cleaner
• Auto-Empty Charging Base
• Power Cord
• Extra Side Brushes (2 pairs)
• Extra HEPA Filter
• Extra Disposable Dust Bag
• Extra Mop Pad
• Cleaning Tool (brush and hair cutter)
• Quick Start Guide / Instruction Manual

All components included in the OBODE A8+ package.

2.2. Initial Assembly

Follow these steps for initial setup:

1. Install Side Brushes: Gently push the colored side brushes onto their corresponding posts (purple for right, red for left) on the underside of the robot until they click into place.
2. Install Mop Pad: Attach the mop pad to the mop module and slide the module into the designated slot at the rear of the robot.
3. Fill Water Tank: Open the water tank cap on the mop module and fill with clean water. Close the cap securely.
4. Position Charging Base: Place the auto-empty charging base against a wall in an open area, ensuring there are no obstacles within 1.5 meters in front and 0.5 meters to the sides. Plug in the power cord and turn on the main switch located on the back of the base.
5. Charge Robot: Place the robot onto the charging base. Ensure the charging contacts align. The robot will begin charging automatically.
6. Download App: Download the "obode Life App" from your smartphone's app store. Follow the in-app instructions to connect your robot to your home Wi-Fi network.

Underside view of the robot, highlighting brush and mop pad installation points.

3. Operating Instructions

3.1. App Control & Mapping

The "obode Life App" provides comprehensive control over your robot vacuum:

• Real-time Mapping: The robot uses LiDAR navigation to create a detailed map of your home, visible in the app.
• Customizable Cleaning: Edit the map to divide, combine, or name rooms. Set no-go zones or virtual walls.
• Scheduling: Create custom cleaning schedules for specific rooms or the entire house at preferred times.
• Cleaning Modes: Select from various cleaning modes including High-efficiency, Exhaustive, Quiet, Standard, and Turbo suction power. Adjust water levels for mopping (Dry, Low, Standard, High).
• Remote Control: Manually control the robot's movement using the app's remote control feature.

The obode Life App interface for managing cleaning maps and schedules.

3.2. Navigation & Obstacle Avoidance

The OBODE A8+ is equipped with advanced sensors for intelligent navigation:

• LiDAR Navigation: Provides centimeter-level accuracy for mapping and efficient cleaning paths.
• 30+ Advanced Sensors: Enables anti-collision, anti-falling, and precise edge cleaning (within 10mm of walls).
• Carpet Detection: Automatically increases suction power when on carpets for deeper cleaning.
• Auto Mop Lifting: The mop pad automatically lifts when a carpet is detected to prevent wetting.

The robot's 3D perception allows for flexible and free roaming while avoiding obstacles.

Video demonstrating the OBODE A8+'s centimeter accuracy in avoiding obstacles.

3.3. Voice Control

Integrate your OBODE A8+ with smart home assistants:

• Compatible Devices: Works with Amazon Echo and Google Home.
• Commands: Use voice commands to start, stop, or send the robot back to its charging base.

Voice commands allow for convenient control of the robot vacuum.

4. Maintenance

4.1. Auto-Empty Dust Collection

The auto-empty charging base automatically empties the robot's dustbin:

• 30 Days Dust Collection: The large capacity dust bag in the base holds up to 30 days of debris.
• Dust Bag Replacement: Open the lid of the auto-empty base, remove the full disposable dust bag, and insert a new one. Instructions are typically found on the inside of the lid.

The auto-empty base provides up to 30 days of dust collection without manual intervention.

Video demonstrating the self-emptying function of the OBODE A8+ robot vacuum.

4.2. Cleaning Filters & Brushes

Regular cleaning of filters and brushes ensures optimal performance:

• Dust Tank & Filter: The robot's internal dust tank can be manually opened for cleaning. Remove the HEPA filter and tap it to dislodge dust. The filter can also be washed with water and air-dried completely before reinstallation.
• Main Brush: Remove the main brush cover and lift out the main brush. Use the provided cleaning tool to cut and remove any tangled hair or debris.
• Side Brushes: Periodically check and clean the side brushes for tangled hair or debris.
• Mop Pad: Remove the mop pad after each mopping session and wash it. Allow it to air dry completely.

4.3. Accessory Lifetime Tracking

The "obode Life App" helps you monitor the lifespan of consumable parts:

• Monitor Usage: The app tracks the remaining hours for the HEPA filter, side brushes, and main brush.
• Replacement Reminders: Receive notifications when accessories are due for replacement to maintain cleaning efficiency.

5. Troubleshooting

If you encounter issues with your OBODE A8+, refer to these common solutions:

• Robot gets lost or cannot return to base: Ensure the charging base is in an open area with clear space around it. Check for any new obstacles in the robot's path.
• Self-emptying issues: Check if the disposable dust bag in the auto-empty base is full and needs replacement. Ensure the dust channel is not blocked.
• Mopping function not working: Verify the water tank is filled and the mop pad is correctly installed. Check the app for water level settings.
• Battery not charging: Ensure the robot is correctly docked and the charging contacts are clean. Confirm the power switch on the base is on and the power cord is securely connected.
• Robot bumping into objects: Clean the sensors on the robot to ensure they are not obstructed. Recalibrate the map if necessary through the app.

For more detailed troubleshooting, consult the full instruction manual or the "Help and Feedback" section in the obode Life App.

6. Specifications

7. Warranty & Support

For warranty information, please refer to the documentation included in your product packaging or contact Midea customer support. It is recommended to keep your proof of purchase.

Note: Some users have reported difficulty in finding replacement parts. Please contact Midea customer support for inquiries regarding spare parts availability.