Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LUXRITE 6 Inch LED Motion Sensor Ceiling Light, Model LR23834. This fixture features automatic motion detection, selectable color temperatures (3000K, 4000K, 5000K), and a wet rating for versatile indoor and outdoor use.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- Read all instructions carefully before installation.
- Ensure the supply voltage is 120V AC.
- All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with proper electrical wiring, consult a qualified electrician.
- Do not install near heat sources or in areas with excessive vibration.
- This fixture is suitable for wet locations.
Package Contents
- 1 x LUXRITE 6 Inch LED Motion Sensor Ceiling Light (Model LR23834)
- Mounting Hardware (screws, wire nuts)
- Instruction Manual
Specifications
| Brand | LUXRITE |
| Model Number | LR23834 |
| Voltage | 120V AC |
| Wattage | 15 Watts |
| Brightness | 1000 Lumens |
| Color Temperature | 3000K (Soft White), 4000K (Cool White), 5000K (Bright White) - Selectable |
| Motion Sensor Range | 16 feet at 90° detection angle |
| Recommended Installation Height | Up to 7.8 feet |
| Motion Sensor Timeout | 30 seconds (after motion ceases) |
| Material | Acrylic, Metal |
| Installation Type | Flush Mount |
| Usage Environment | Indoor, Outdoor (Wet Rated) |
| Average Lifetime | 50,000 Hours |
| Color Rendering Index (CRI) | 80+ |
| Product Dimensions | 7.91 x 1.31 x 7.91 inches |
| Item Weight | 13.76 ounces |
| Certifications | ETL Listed |
Setup and Installation
Follow these steps for proper installation. Ensure power is OFF at the circuit breaker before beginning.
- Step 1: Select Color Temperature
Before mounting, locate the CCT (Correlated Color Temperature) switch on the back of the fixture. Select your desired color temperature: 3000K (Soft White), 4000K (Cool White), or 5000K (Bright White). This setting cannot be changed after installation without removing the fixture.
Image: The back of the light fixture showing the CCT switch for selecting color temperature.
- Step 2: Connect Wiring
Connect the corresponding color wires from the fixture to the wires in your junction box. Typically, this involves connecting black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Secure connections with wire nuts.
Image: A diagram showing the electrical wiring process for the light fixture.
- Step 3: Attach Fixture to Junction Box
Carefully align the disk light with the junction box (not included) and secure it using the provided mounting screws. Ensure the fixture is flush against the ceiling.
Image: Step-by-step visual guide for installing the light fixture.
- Step 4: Secure Diffuser
Twist the diffuser onto the light enclosure and lock it securely in place.
Image: The assembled LUXRITE 6 Inch LED Motion Sensor Ceiling Light.
Recommended Installation Locations: Closets, hallways, pantries, entryways, utility rooms, patios, laundry rooms, and other areas where automatic lighting is beneficial.
Image: Examples of the light fixture installed in different home environments.
Operating Instructions
This fixture is designed for automatic, hands-free operation.
- Motion Detection: Once installed and power is restored, the light will automatically activate when motion is detected within its 16-foot range and 90° detection angle. The PIR (Passive Infrared) motion sensor is located on the fixture's surface.
Image: Visual representation of the motion sensor's capabilities and recommended installation parameters.
- Continuous Illumination: The light will remain on as long as continuous motion is detected within its sensing area.
- Automatic Shutoff: After motion ceases, the light will automatically turn off after approximately 30 seconds.
- Color Temperature: The color temperature is set during installation using the CCT switch (3000K, 4000K, or 5000K).
Maintenance
The LUXRITE LED Motion Sensor Ceiling Light requires minimal maintenance.
- Cleaning: Ensure power is disconnected before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- LED Lifespan: The integrated LED chips have an average lifespan of 50,000 hours, meaning no bulb replacement is necessary for the life of the fixture.
Troubleshooting
If you encounter issues with your light fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, incorrect wiring, CCT switch not set. | Check circuit breaker. Verify wiring connections. Ensure CCT switch is set to a color temperature. |
| Light does not detect motion. | Sensor obstructed, outside detection range, incorrect installation height. | Ensure sensor is clear. Verify motion is within 16ft range. Check installation height (max 7.8ft). |
| Light stays on continuously. | Constant motion in detection area, sensor malfunction. | Ensure no continuous motion is present. If problem persists, contact support. |
| Light flickers. | Loose wiring, incompatible dimmer (not designed for dimming). | Check wiring connections. This fixture is not designed for use with dimmers. |
Warranty and Support
This LUXRITE LED Motion Sensor Ceiling Light is backed by a 3-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact LUXRITE customer support. Refer to the product packaging or the official LUXRITE website for current contact information.
