TecTake 800808
tectake® Wicker Garden Lounge Set Instruction Manual
Model: 800808
Introduction
Thank you for choosing the tectake® Wicker Garden Lounge Set. This 5-piece set, including a table, two armchairs, and two stools, is designed to provide comfort and style for your outdoor living space. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure long-lasting enjoyment of your product.
Setup and Assembly
Your tectake® garden lounge set is delivered as a construction kit and requires assembly. Please follow these steps carefully to ensure proper setup and stability.
- Unpack Components: Carefully remove all parts from the packaging. Verify that all components listed in the packing list are present and undamaged. Lay out all parts on a clean, soft surface to prevent scratches.
- Identify Hardware: Separate and identify all screws, bolts, and tools provided. Note that some screws may vary slightly in length; ensure you use the correct ones for each step as indicated in the assembly diagrams (if provided with the physical product).
- Assemble Chairs: Begin by assembling the frames of the armchairs. Attach the backrests and armrests to the seat base using the appropriate screws. Do not fully tighten screws until all parts are loosely connected.
- Assemble Stools: Connect the frame components of the stools.
- Assemble Table: Construct the table frame. Ensure the supports for the glass top are correctly positioned.
- Final Tightening: Once all components are loosely assembled, place the furniture on a flat, level surface. Systematically tighten all screws and bolts. Avoid over-tightening.
- Place Cushions and Glass Top: Insert the soft cushions into the armchairs and place them on the stools. Carefully place the safety glass top onto the table.
Image: The fully assembled tectake® Wicker Garden Lounge Set, showcasing its compact design.
Image: Detailed product information and dimensions for each component of the lounge set.
Operating Instructions
The tectake® Wicker Garden Lounge Set is designed for versatile outdoor use, offering comfort and practical features.
- Seating Arrangement: The set includes two armchairs and two stools, providing flexible seating for up to four people. The stools can also serve as footrests for added comfort.
- Compact Storage: For space-saving storage, the armchairs and stools are designed to fit neatly under the table. Simply slide the stools under the table, and then slide the armchairs over the stools and under the table. This compact design helps free up space when the set is not in use.
- Integrated Bottle Opener: The table features a convenient integrated bottle opener on its side. This allows for easy opening of beverages while enjoying your outdoor space.
- Removable Glass Top: The safety glass top on the table is removable, making it easy to clean and providing access to the space underneath for storage or other uses.
Image: Illustration of the smart design allowing for compact storage of the chairs and stools under the table.
Image: Details showcasing the side-mounted bottle opener, the durable safety glass top, the smart compact system, and the water-repellent cushion covers.
Maintenance and Care
Proper maintenance will extend the life and preserve the appearance of your tectake® garden lounge set.
- Cushion Care: The cushion covers are made from water-repellent polyester and are washable. For cleaning, remove the covers and wash them according to the care label instructions, typically a gentle cycle with mild detergent. Allow them to air dry completely before reattaching.
- Wicker Cleaning: The poly rattan wicker can be cleaned with a soft cloth, mild soap, and water. Avoid abrasive cleaners or brushes that could damage the material. Rinse thoroughly with clean water and allow to air dry.
- Frame Maintenance: The robust steel frame is lacquered to protect against corrosion. Periodically wipe the frame with a damp cloth to remove dirt and dust. Inspect screws and connections regularly and tighten if necessary.
- Glass Top Cleaning: Clean the safety glass top with a glass cleaner and a soft, lint-free cloth.
- Weather Protection: While the set is designed to be weather-resistant, for prolonged outdoor use and to protect against material fatigue and discoloration, it is highly recommended to use a protective cover when the furniture is not in use, especially during harsh weather conditions or off-season storage.
Image: Demonstrates the wind and weather resistance of the set, highlighting water-repellent properties, powder-coated steel frame construction, and 100% stainless steel screws.
Troubleshooting
This section addresses common issues you might encounter with your garden lounge set.
| Problem | Possible Cause | Solution |
|---|---|---|
| Furniture feels wobbly after assembly. | Screws not fully tightened or uneven surface. | Ensure all screws are securely tightened. Place the furniture on a flat, level surface. If still wobbly, loosen all screws slightly, gently rock the furniture to settle, then re-tighten. |
| Cushions appear stained or dirty. | Accumulation of dirt, dust, or spills. | Remove cushion covers and wash them according to care instructions. For minor spots, spot clean with a damp cloth and mild soap. |
| Wicker material looks dull or dirty. | Exposure to elements, dust, or grime. | Clean the wicker with a soft cloth, mild soap, and water. Rinse thoroughly and allow to air dry. Consider using a protective cover when not in use. |
| Glass top is scratched or damaged. | Impact or abrasive cleaning. | Avoid placing sharp or heavy objects directly on the glass. Use soft cloths for cleaning. If severely damaged, contact customer support for replacement options. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 800808 (Palermo) |
| Brand | TecTake |
| Material | Poly rattan (Plastic), Steel (powder-coated), Glass, Polyester (cushions) |
| Color | Black |
| Overall Product Dimensions (L x W x H) | Approximately 391.5 x 196.5 x 73 cm (when fully extended/arranged) |
| Chair Dimensions (L x W x H) | 52 x 56 x 92.5 cm |
| Stool Dimensions (L x W x H) | 40.5 x 40.5 x 39.5 cm |
| Table Dimensions (L x W x H) | 130.5 x 65.5 x 73 cm |
| Glass Plate Dimensions | 126.2 x 61.2 x 0.5 cm |
| Total Product Weight | Approximately 43 kg |
| Assembly Required | Yes |
| Max. Load Capacity (Chair) | 120 kg |
| Max. Load Capacity (Stool) | 80 kg |
| Max. Load Capacity (Table) | 45 kg |
Warranty and Support
For any questions, concerns, or issues not covered in this manual, please contact tectake customer support. Please have your model number (800808) and purchase information ready when contacting support.
Information regarding spare parts availability is not provided in the product specifications. For specific part inquiries, please contact tectake customer service directly.
Note: This product is manufactured by tectake.
Official Product Videos
No official product videos from the seller are available for this product at this time.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.