EFCUT WCB-4F

Download PDF
Contents

EFCUT WCB-4F Replacement Blades Instruction Manual for C30 Series Wood Chippers

Model: WCB-4F | Brand: EFCUT

Product Overview

These EFCUT WCB-4F replacement blades are specifically designed for EFCUT C30, C30 Mini, C30 Lite, and 3-in-1 wood chippers that handle a maximum cutting diameter of 3 inches. Constructed from heavy-duty high-speed steel, these cutting knives offer superior chipping performance and extended durability, allowing for multiple sharpenings to maintain optimal cutting efficiency. This package includes a set of four replacement blades.

Close-up of four EFCUT high-speed steel replacement blades

Image: Four high-speed steel replacement blades, showcasing their design and material.

Specifications

MaterialHigh Speed Steel
BrandEFCUT
Product Dimensions (L x W)4.13" L x 1.38" W (105mm x 35mm)
Item Thickness0.20" H (5mm)
Hole Spacing1.575'' (40mm)
Hole Size0.315'' (8mm)
Item Weight0.49 Kilograms (for the set of 4)
Compatible ModelsEFCUT C30, C30 Mini, C30 Lite, 3-in-1 Wood Chippers (Max 3-inch cutting diameter)
QuantityPack of 4

Important: These blades are not suitable for 4-inch C40 chippers.

EFCUT C30, C30 Mini, C30 Lite, and 3-in-1 wood chippers compatible with these blades

Image: Various EFCUT wood chipper models that are compatible with these replacement blades.

Blade Replacement Guide

Regular inspection and replacement of chipper blades are essential for optimal performance and safety. Follow these steps to replace the blades on your EFCUT C30 series wood chipper.

Video Tutorial: How to Change Your EFCUT Wood Chipper Blades

Video: A detailed guide on replacing the blades for EFCUT C30, C30 Lite, and C30 Mini wood chippers.

Step-by-Step Instructions:

  1. Preparation: Ensure the chipper is turned off, unplugged (if electric), and the engine is cool. Wear appropriate safety gear, including gloves and eye protection.
  2. Step 1: Remove Access Panel Nuts

    Use a 10mm wrench or socket spanner to remove the four nuts securing the blade access panel on the side of the chipper housing.

    Illustrative image from video: Person using a 10mm wrench to remove nuts from the chipper's side panel

    Image: Illustrative step from the video showing removal of nuts from the access panel.

  3. Step 2: Remove Bottom Plate Nuts and Open Panel

    Remove the two nuts located on the bottom of the turnover plate of the housing using a 13mm wrench. Once these nuts are removed, carefully open the plate to expose the rotor and blades.

    Illustrative image from video: Person using a 13mm wrench to remove nuts from the bottom of the chipper housing

    Image: Illustrative step from the video showing removal of bottom nuts and opening the panel.

  4. Step 3: Align Blade for Access

    Gently turn the rotor by hand until the blade you wish to replace is aligned with the check window opening.

    Illustrative image from video: Person rotating the chipper rotor to align a blade with the access window

    Image: Illustrative step from the video showing alignment of the blade.

  5. Step 4: Loosen Blade Nuts and Remove Old Blade

    Use an Allen key to secure the screw on one side of the blade. Simultaneously, use a 13mm wrench on the other side to loosen the corresponding nut. Once loosened, remove the old blade.

    Illustrative image from video: Person using an Allen key and wrench to loosen blade nuts

    Image: Illustrative step from the video showing loosening blade nuts and removing the old blade.

  6. Step 5: Install New Blade

    Place the new blade into position, ensuring the cutting edge faces the rotor. Install the middle bolt first, then secure the bolts on both sides. Finally, tighten all bolts firmly. Attention: Ensure the blade is correctly oriented for cutting.

    Illustrative image from video: Person installing a new blade, ensuring the cutting edge faces the rotor

    Image: Illustrative step from the video showing installation of the new blade and tightening the bolts.

  7. Step 6: Repeat for Other Blades and Reassemble

    Turn the rotor to access the other blade(s) and repeat Steps 3-5 for each blade. Once all blades are replaced, close the access panel and secure all nuts removed in Steps 1 and 2. Ensure all fasteners are tight before operating the chipper.

    Illustrative image from video: Person reassembling the chipper after blade replacement

    Image: Illustrative step from the video showing final reassembly of the chipper after blade replacement.

Maintenance Tips

  • Regularly inspect blades for sharpness and damage. Dull or chipped blades reduce efficiency and can strain the chipper's engine.
  • Sharpen blades as needed. These high-speed steel blades are designed for repeated sharpening.
  • Always ensure blades are securely fastened before each use.
  • Store spare blades in a dry, safe place to prevent rust and damage.

Support & Contact

For any technical questions or assistance, please feel free to send a message to EFCUT Customer Support. EFCUT is committed to providing prompt and helpful support for all your product inquiries.

You can visit the official EFCUT store for more information and products: EFCUT Store on Amazon.

© 2026 EFCUT. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.