TANBABY 150W Motion Sensor Deformable LED Garage Light User Manual

Introduction

This manual provides essential information for the safe and efficient use of your TANBABY 150W Motion Sensor Deformable LED Garage Light. Please read these instructions carefully before installation and operation, and retain them for future reference.

Safety Information

• Indoor Use Only: This product is designed for indoor use exclusively. It is not rated for outdoor environments and must not be exposed to moisture or other outdoor elements.
• Eye Safety: This product contains high-intensity LED devices. To prevent permanent eye damage, avoid staring directly at the light beam from a close range.
• Heat Warning: The light panels will generate heat during operation due to heat dissipation. Do not touch the panels when the light is working to avoid potential burns.
• Electrical Safety: Ensure the power supply is disconnected before installation, removal, or any maintenance to prevent electric shock.

Product Features

• High Brightness: Each light provides 15,000 lumens (30,000 lumens total for a 2-pack) at 6500K daylight color temperature.
• Advanced Motion Sensor: Equipped with a microwave motion sensor with 360° sensing angle and a detection range of 10-16 feet. The light automatically turns on when motion is detected and turns off after 30 seconds of no motion.
• Deformable Design: Features six adjustable LED panels that can be angled up to 90° to expand the illumination range and provide 360° light coverage.
• Energy Efficient: Utilizes LED technology for significant energy savings (up to 85% compared to traditional bulbs) and a high-power driver (0.95) for stable output without flicker.
• Long Lifespan: Constructed with premium plastic for heat dissipation, ensuring a lifespan of up to 50,000 hours.
• Easy Installation: Designed for E26/E27 standard lamp bases, requiring no tools or complex wiring for installation.

Specifications

Setup and Installation

The TANBABY LED Garage Light is designed for quick and easy installation into standard E26/E27 light sockets. No special tools or complex wiring are required.

1. Power Off: Before beginning installation, ensure the power to the light fixture is turned off at the circuit breaker to prevent electrical hazards.
2. Remove Old Bulb: Carefully unscrew and remove any existing light bulb from the E26/E27 socket.
3. Screw in New Light: Screw the TANBABY LED Garage Light into the standard E26/E27 lamp base until it is securely fastened. Do not overtighten.
4. Adjust Panels: Once installed, gently adjust the six deformable LED panels to direct light to your desired areas. Each panel can be angled up to 90 degrees.
5. Restore Power: Turn the power back on at the circuit breaker.

Image: Easy installation process for the TANBABY LED Garage Light. Simply screw it into a standard E26/E27 socket.

Operation

Your TANBABY LED Garage Light features both motion-activated and constant-on modes, along with adjustable light panels.

• Motion Sensor Mode: The light is equipped with a microwave motion sensor. When set to motion mode, it will automatically turn on when movement is detected within its 10-16 feet range and 360° sensing angle. It will turn off approximately 30 seconds after no motion is detected. The sensor is highly sensitive and can detect movement even through non-metallic walls.
• Adjustable Panels: The six LED panels can be manually adjusted to direct light precisely where needed. This allows for customized illumination, eliminating dark spots and ensuring comprehensive coverage in your space.

Image: Illustration of the 360-degree motion detection range (10-16 feet) and the 30-second auto-off feature.

Image: Visualizing the deformable design, showing how panels can be adjusted up to 90 degrees for optimal light distribution.

Maintenance

To ensure the longevity and optimal performance of your TANBABY LED Garage Light, follow these simple maintenance guidelines:

• Cleaning: Ensure the light is turned off and cool before cleaning. Use a soft, dry cloth to wipe the surfaces of the light panels and the main body. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the product.
• Inspection: Periodically check the light for any signs of damage, such as cracked panels or loose connections. If any damage is found, discontinue use and contact customer support.
• Environment: As this is an indoor-only product, ensure it remains in a dry environment, free from direct exposure to water or high humidity.

Troubleshooting

If you encounter any issues with your TANBABY LED Garage Light, please refer to the following common troubleshooting steps:

• Light Not Turning On:
  • Check if the power switch is on.
  • Ensure the light is securely screwed into the E26/E27 socket.
  • Verify that the circuit breaker for the light fixture is not tripped.
  • If in motion sensor mode, ensure there is detectable movement within the range.
• Light Flickers:
  • Ensure the light is securely screwed into the socket. A loose connection can cause flickering.
  • Check for stable power supply.
• Motion Sensor Not Responding:
  • Ensure the light is set to motion sensor mode.
  • Verify that the detection range is not obstructed by large objects or metal structures.
  • Adjust the installation height if necessary (recommended 10-16 feet for ceiling mounting).
• Light Stays On Constantly:
  • Check if the light is in constant-on mode.
  • If in motion sensor mode, ensure there are no continuous movements within the detection range.

If these steps do not resolve the issue, please contact TANBABY customer support for further assistance.

Warranty and Support

The TANBABY 150W Motion Sensor Deformable LED Garage Light comes with a limited warranty. For specific warranty details and duration, please refer to the product packaging or contact TANBABY customer service.

For support, inquiries, or to report any issues, please visit the official TANBABY store or contact their customer service department. You can find more information and contact details on the TANBABY Amazon Store.