Introduction
Thank you for purchasing the Quoizel Townes Integrated LED Outdoor Wall Lantern. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
This fixture features a matte black finish and clear seeded glass, designed for outdoor use to enhance your home's exterior.
Important Safety Information
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with electrical wiring.
- This fixture is designed for 120 Volt AC circuits.
- Do not attempt to alter the integrated LED module. It is not user-replaceable.
- Handle glass components with care to prevent breakage.
- This product is ETL listed, indicating compliance with North American safety standards.
What's in the Box
Carefully unpack all components and inspect for any damage. Keep all packaging materials until you are sure all parts are present and in good condition.
- Quoizel Townes Integrated LED Outdoor Wall Lantern (Model TWN8406MBK)
- Mounting hardware kit
- Integrated LED module (pre-installed)
- Instruction Manual
Image: Front view of the Quoizel Townes Integrated LED Outdoor Wall Lantern, showcasing its matte black finish and clear seeded glass panel.
Setup and Installation
This fixture is designed for wall-mount installation. Professional installation is recommended if you are not experienced with electrical wiring.
- Turn off Power: Before starting, ensure the power supply to the fixture location is turned off at the circuit breaker or fuse box.
- Prepare Mounting Surface: Ensure the mounting surface is clean, dry, and structurally sound.
- Install Mounting Bracket: Attach the mounting bracket to the junction box using the screws provided in the hardware kit. Ensure the bracket is securely fastened.
- Make Electrical Connections:
- Connect the fixture's black wire to the house's black (hot) wire.
- Connect the fixture's white wire to the house's white (neutral) wire.
- Connect the fixture's ground wire (bare copper or green) to the house's ground wire and to the mounting bracket's ground screw.
- Secure all connections with wire nuts and wrap with electrical tape for added safety.
- Mount the Fixture: Carefully align the fixture with the mounting bracket and secure it using the provided screws. Ensure the fixture is flush against the wall and stable.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: Two Quoizel Townes Outdoor Wall Lanterns installed on an exterior wall, demonstrating typical placement.
Image: Close-up view of the Quoizel Townes lantern mounted on an outdoor wall, highlighting its design and light output.
Operating Instructions
The Quoizel Townes Integrated LED Outdoor Wall Lantern is designed for simple operation.
- Power On/Off: The fixture is controlled by a standard wall switch connected to its electrical circuit. Flip the switch to the 'ON' position to illuminate the lantern and 'OFF' to turn it off.
- Integrated LED: This fixture uses an integrated LED light source, which is highly energy-efficient and has a long lifespan. No traditional bulb replacement is necessary.
Care and Maintenance
Proper care will ensure the longevity and appearance of your Quoizel Townes lantern.
- Cleaning: To clean the fixture, turn off the power and wipe with a soft, damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
- Glass Care: The clear seeded glass can be cleaned with a mild glass cleaner applied to a cloth, not directly to the fixture.
- Outdoor Exposure: This fixture is designed for outdoor use and is resistant to typical weather conditions. However, it is not submersible. Avoid directing high-pressure water sprays directly at the fixture.
- LED Longevity: The integrated LED is designed for long-term use and does not require replacement. If the LED fails, the entire fixture may need servicing or replacement.
Image: Detailed view of the clear seeded glass, which creates a unique light effect.
Troubleshooting
If your Quoizel Townes lantern is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up. |
|
|
| Light is dim or flickers. |
|
|
| Water inside the glass. |
|
|
If these steps do not resolve the issue, please contact Quoizel customer support.
Specifications
| Brand | Quoizel |
| Model Number | TWN8406MBK |
| Product Dimensions | 4.25"L x 6.5"W x 10"H |
| Item Weight | 3.08 pounds |
| Material | Aluminum, Glass |
| Color | Matte Black |
| Style | Modern |
| Light Source Type | Integrated LED |
| Wattage | 10 Watts |
| Voltage | 120 Volts |
| Mounting Type | Wall Mount |
| Indoor/Outdoor Usage | Outdoor |
| Shade Material | Glass (Clear Seeded) |
| Certifications | ETL Listed |
Warranty Information
This Quoizel product is covered by a manufacturer's warranty. For specific details regarding the warranty period and coverage for your Townes Integrated LED Outdoor Wall Lantern, please refer to the warranty documentation included with your purchase or visit the official Quoizel website.
Quoizel's "Coastal Armour" products, which share similar durable construction, often feature a 5-year finish warranty. Please verify if this applies to your specific model on the manufacturer's website.
Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Quoizel customer support directly.
- Manufacturer: Quoizel
- Website: www.quoizel.com (Recommended for official support and up-to-date information)
- Model Number: TWN8406MBK (Please have this ready when contacting support)
