1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Bose SoundLink Revolve+ II Portable Bluetooth Speaker. Please read these instructions thoroughly before using your speaker.
What's in the Box
- Bose SoundLink Revolve+ II Bluetooth Speaker
- USB Cable
- Wall Charger
Image 1: The Bose SoundLink Revolve+ II speaker shown with its USB charging cable and wall charger.
2. Setup
2.1 Charging the Battery
Before initial use, fully charge the speaker's battery. Connect the small end of the USB cable to the USB-C port on the speaker and the large end to the wall charger. Plug the wall charger into a power outlet. The battery indicator light will show charging status.
2.2 Powering On/Off
To power on the speaker, press the Power button located on the top panel. To power off, press the Power button again. The speaker will provide an audio prompt indicating its status.
Image 2: Top panel of the speaker displaying the Power, Bluetooth, Volume, and Multi-function buttons.
3. Operating Instructions
3.1 Bluetooth Pairing
- Power on the speaker.
- Press and hold the Bluetooth button until the Bluetooth indicator light blinks blue and you hear an audio prompt.
- On your mobile device (smartphone, tablet, laptop), enable Bluetooth and select "Bose Revolve+ II" from the list of available devices.
- Once connected, the speaker will provide an audio prompt, and the Bluetooth indicator light will glow solid white.
3.2 Speaker Controls
- Power Button: Powers the speaker on or off.
- Bluetooth Button: Initiates Bluetooth pairing mode.
- Volume Buttons (+/-): Adjusts the speaker's volume.
- Multi-function Button (•••): Controls playback (play/pause, skip tracks) and activates voice assistant.
3.3 Party Mode and Stereo Mode
The Bose SoundLink Revolve+ II speakers can be paired together for an enhanced audio experience. These modes require two Bose SoundLink Revolve+ II speakers.
Party Mode (Synchronized Playback)
- Ensure both speakers are powered on.
- Connect one speaker to your mobile device via Bluetooth.
- On the connected speaker, press and hold the Bluetooth button and the Volume Up (+) button simultaneously.
- Release the buttons when you hear the audio prompt: "Press the Bluetooth and volume down buttons simultaneously on a second Bose device."
- On the second speaker, press and hold the Bluetooth button and the Volume Down (-) button simultaneously.
- Release the buttons when the speaker emits a tone. After approximately 10 seconds, both speakers will announce "Party mode."
- For optimal performance, place speakers in the same room or outdoor area without obstructions between them.
Stereo Mode (Left/Right Channel Separation)
- First, configure your speakers for Party Mode as described above.
- On either speaker, press the Bluetooth button and the Volume Up (+) button simultaneously.
- Release the buttons when you hear "Stereo mode." One speaker will announce "Left" and the other "Right."
- For optimal stereo imaging, place speakers within 10 feet of each other, free from obstructions, and ensure your listening position is equidistant from both speakers.
4. Maintenance
4.1 Cleaning
To clean the speaker, use a soft, dry cloth. Do not use any solvents, chemicals, or cleaning sprays. Avoid getting moisture into any openings.
4.2 Water Resistance
The SoundLink Revolve+ II is water-resistant (IPX4 rated), meaning it can withstand splashes of water. It is not designed to be submerged in water. Ensure all ports are dry before charging.
5. Troubleshooting
5.1 No Power
- Ensure the battery is charged. Connect the speaker to a power source using the provided USB cable and wall charger.
- Press the Power button firmly.
5.2 No Sound
- Increase the volume on both the speaker and your connected device.
- Ensure the speaker is properly paired via Bluetooth to your device.
- Try disconnecting and re-pairing the Bluetooth connection.
- Ensure no other devices are connected to the speaker.
5.3 Bluetooth Pairing Issues
- Ensure the speaker is in pairing mode (blinking blue Bluetooth indicator).
- Move your device closer to the speaker.
- Clear the speaker from your device's Bluetooth list and attempt to pair again.
- Restart both the speaker and your Bluetooth device.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | SoundLink Revolve + (Series II) |
| Speaker Type | Portable Bluetooth Speaker |
| Connectivity Technology | Bluetooth, Auxiliary, USB |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | 10 Meters (33 Feet) |
| Power Source | Battery Powered (1 Lithium Ion battery required) |
| Water Resistance Level | Water Resistant (IPX4) |
| Control Method | Voice, Button |
| Product Dimensions | 4.13 x 4.13 x 7.25 inches |
| Item Weight | 2 pounds |
| Color | Silver |
| Manufacturer | BOSE |
| UPC | 656942633617 |
7. Warranty Information
The Bose SoundLink Revolve+ II Portable Bluetooth Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the official warranty documentation included with your product or visit the official Bose website.
8. Customer Support
For further assistance, technical support, or to access additional resources, please visit the official Bose support website. You can find FAQs, product registration, and contact information for customer service there.
Official Bose Website: www.bose.com/support
