Introduction
Thank you for choosing the Boytone BT-10BR Studio Recording DJ Headphones. These headphones are designed to deliver high-fidelity audio for professional monitoring, DJing, and general listening. With robust construction, comfortable design, and versatile connectivity, they are an ideal choice for audio enthusiasts and professionals alike. Please read this manual carefully to ensure proper use and maintenance of your headphones.
Image: Front view of the Boytone BT-10BR headphones with both 3.5mm and 6.35mm audio cables.
Key Features
- Outstanding Stereo Sound: Equipped with 50mm speaker drivers and neodymium magnets for supreme HIFI sound and deep bass response.
- Noise Isolation: Soft padded ear cushions are designed for comfort and effective noise isolation.
- Flexible Monitoring: 90-degree swiveling ear cups allow for convenient single-ear monitoring.
- Adjustable Comfort: The headband is adjustable and stretchable to provide a comfortable fit for extended wear.
- Detachable Coiled Cable: Includes a DJ-style coiled cord (9.8ft stretched) for extended reach, and a standard 3.5mm to 3.5mm cable with an in-line microphone.
- Dual Connectivity: Supports both 3.5mm and 6.35mm audio jacks for broad compatibility.
- Foldable Design: Practical folding construction for easy storage and transport.
Image: Diagram illustrating 90° swiveling ear pads, movable headband, in-line microphone controls, and super soft ear pads.
Package Contents
- 1 x Boytone BT-10BR DJ Headphones
- 1 x Portable Bag
- 1 x User Manual
- 1 x 3.5mm Audio Jack Cable
- 1 x 6.35mm to 3.5mm Coiled Cable
Image: Contents of the Boytone BT-10BR package, including headphones, cables, portable bag, and user manual.
Setup
1. Connecting the Audio Cables
- Identify the appropriate audio cable for your device: the 3.5mm to 3.5mm cable for standard devices (phones, laptops) or the 3.5mm to 6.35mm coiled cable for professional audio equipment (mixers, amplifiers).
- Insert the 3.5mm end of the chosen cable into the audio jack located on the left earcup of the headphones.
- Connect the other end of the cable to the corresponding audio output port on your device.
2. Adjusting for Comfort
- Gently extend or retract the headband to fit your head size. The headband is designed to be adjustable and stretchable.
- Ensure the soft padded ear cushions fully cover your ears for optimal sound isolation and comfort.
Operating Instructions
Audio Playback
Once connected to your audio source, simply play your desired audio. Adjust the volume directly on your connected device.
Microphone Usage (with 3.5mm cable)
The 3.5mm cable includes an in-line microphone with control buttons:
- Play/Pause: Press the button once.
- Answer Call/End Call: Press the button once to answer, press once again to end.
Single-Ear Monitoring
The ear cups feature a 90-degree swiveling design, allowing you to rotate one earcup away from your ear for single-ear monitoring, commonly used in DJ and studio environments.
Device Compatibility
These headphones offer broad compatibility with various audio devices:
- iPhone and Samsung devices
- Android devices
- Electronic guitars
- Audio mixers
- Any device with a 3.5mm or 6.35mm audio jack
Image: Diagram showing the Boytone BT-10BR headphones connected to a mixer, speakers, turntable, electric guitar, acoustic guitar, and TV, illustrating broad compatibility.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the ear cushions and headphone surfaces. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, fold the headphones and store them in the provided portable bag to protect them from dust and damage.
- Cable Care: Handle the detachable cables with care. Avoid sharp bends or excessive pulling to prevent internal wire damage.
- Avoid Moisture: The headphones are not water resistant. Keep them away from liquids and high humidity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or low volume | Incorrect cable connection, low volume on device, faulty cable. | Ensure cables are fully inserted. Increase volume on your audio source. Try a different cable if available. |
| Distorted sound | Volume too high, poor audio source quality, damaged drivers. | Lower the volume. Test with a different audio source. If distortion persists, contact support. |
| Microphone not working | Using the wrong cable (coiled cable does not have mic), mic disabled on device, faulty mic. | Ensure you are using the 3.5mm cable with the in-line mic. Check microphone settings on your device. |
| Uncomfortable fit | Headband not adjusted properly. | Adjust the headband length until a comfortable fit is achieved. |
Specifications
| Model: | BT-10BR |
| Color: | Brown |
| Speaker Drivers: | 50mm |
| Impedance: | 32 Ohms |
| Sensitivity: | 110dB +- 3dB |
| Frequency Response: | 20Hz-40KHz |
| Max Input Power: | 1600mW |
| Plug Type: | 3.5mm/6.35mm stereo |
| Cable 1: | 2m-3m (9.8ft) 3.5mm to 6.35mm coiled cable |
| Cable 2: | 1.2m (3ft) 3.5mm to 3.5mm cable with microphone |
| Product Dimensions: | 5.51 x 3.94 x 7.09 inches |
| Item Weight: | 14.9 ounces |
| Material: | Plastic |
| Noise Control: | Sound Isolation |
| Connectivity Technology: | Wired |
| Wireless Communication Technology: | Bluetooth (Note: Product description indicates wired, but specifications list Bluetooth. Please refer to product packaging for definitive wireless capabilities.) |
| Water Resistance Level: | Not Water Resistant |
Official Product Video
Video: An official overview of the Boytone BT-10BR Studio DJ Headphones, highlighting key features, design, and compatibility.
Warranty & Support
For warranty information, technical support, or any inquiries regarding your Boytone BT-10BR headphones, please refer to the product packaging or contact Boytone customer service directly. Contact details can typically be found on the manufacturer's official website or on the product's retail page.
