1. Product Overview
This manual provides instructions for the installation, operation, and maintenance of your Hinkley Weymouth Large Wall Mount Lantern, Model 20018BK. This traditional-style outdoor lantern features a black finish, clear beveled glass, and accommodates four candelabra LED bulbs (not included). It is designed for wall mounting and is suitable for wet locations.
Image 1.1: Front view of the Hinkley Weymouth Large Wall Mount Lantern with indicated dimensions (11" W x 27" H).
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC) and Canadian Electrical Code (CEC). If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
- This fixture is suitable for wet locations, as defined by NEC and CEC, and meets UL & CSA Product Safety Standards.
- Do not install any fixture assembly closer than 6 inches from any combustible material.
- Use only the specified bulb type and wattage. Refer to the 'Specifications' section for details.
Legal Disclaimer: Please check your local laws before purchasing and installing this product.
3. Package Contents
Carefully unpack your new fixture and lay out all parts on a clear area. Ensure all items listed below are present before discarding packaging materials.
- Lantern Fixture Assembly
- Mounting Hardware (e.g., mounting strap, outlet box screws, wire nuts)
- Clear Beveled Glass Panels
- Candle Sleeves (4)
- Instruction Manual
Note: Four 5W Candelabra LED bulbs are required but not included with this product.
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | 20018BK |
| Overall Design | Traditional Wall Mount Lantern, Estate Series |
| Finish Type | Black |
| Material | Aluminum, Glass |
| Product Dimensions (L x W x H) | 11.75" x 11" x 27" |
| Backplate Dimensions (W x H) | 9.75" x 11.25" |
| Extension from Wall | 11.75" |
| Weight | 19.04 lbs |
| Number of Lights | 4 |
| Bulb Type (Recommended) | Candelabra LED |
| Max Wattage per Bulb | 5 Watts (LED) / 60 Watts (Incandescent equivalent) |
| Voltage | 120 Volts |
| Light Output Maximum | 1800 Lumens (with recommended bulbs) |
| Water Resistance Level | Wet Location Rated |
| Special Features | Dimmable, Hardwired |
| Certification | UL, CSA |
5. Installation Instructions
Professional installation is recommended. Ensure power is disconnected at the circuit breaker before proceeding.
- Prepare for Installation: Turn off the main electrical power at the circuit breaker or fuse box. Clear the work area.
- Mount the Backplate: Attach the mounting strap to the electrical outlet box using the provided outlet box screws. Ensure the strap is securely fastened.
- Wire Connections: Connect the fixture's wires to the house wires according to the following:
- Connect the bare copper or green ground wire from the fixture to the green or bare copper ground wire from the outlet box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the outlet box.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the outlet box.
- Secure the Fixture: Align the fixture's backplate with the mounting strap and secure it using the provided mounting screws. Ensure the fixture is flush against the wall and stable.
- Install Glass Panels: Carefully insert the clear beveled glass panels into the designated slots on the fixture. Ensure they are seated properly and securely.
- Install Bulbs: Screw four 5W Candelabra LED bulbs (not included) into the sockets. Do not exceed the maximum wattage.
- Install Candle Sleeves: Place the candle sleeves over the bulb sockets.
- Restore Power: Once installation is complete and all components are secure, restore power at the circuit breaker.
Image 5.1: Top section of the lantern, showing the mounting point.
Image 5.2: Bottom section of the lantern, showing the base.
Image 5.3: Example of the lantern installed on an outdoor wall.
6. Operating Instructions
The Hinkley Weymouth Wall Mount Lantern operates via a standard wall switch connected to its electrical circuit. Ensure the wall switch is in the 'ON' position for the fixture to receive power.
- Turning On/Off: Use the connected wall switch to turn the lantern on or off.
- Dimming Function: This fixture is dimmable. If connected to a compatible dimmer switch (sold separately) and using dimmable LED bulbs, you can adjust the light intensity. Follow the dimmer switch manufacturer's instructions for proper operation.
7. Maintenance
Regular maintenance will help preserve the appearance and functionality of your lantern.
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or glass.
- Glass Cleaning: The clear beveled glass can be cleaned with a mild glass cleaner applied to a cloth, then wiped onto the glass. Avoid spraying cleaner directly onto the fixture.
- Bulb Replacement: Turn off power at the circuit breaker. Allow bulbs to cool completely. Carefully unscrew old bulbs and replace with new 5W Candelabra LED bulbs. Ensure bulbs are fully seated in the sockets.
Image 7.1: Detail of the candle sleeves and bulb sockets for replacement.
8. Troubleshooting
If your lantern is not functioning correctly, refer to the following common issues and solutions:
- Light does not turn on:
- Check that the power is on at the circuit breaker.
- Ensure the wall switch is in the 'ON' position.
- Verify that bulbs are correctly installed and not burnt out. Replace if necessary.
- Check wire connections for proper contact. Ensure they are secure.
- Light flickers:
- Ensure bulbs are fully screwed into the sockets.
- If using a dimmer, ensure it is compatible with LED bulbs and that the bulbs themselves are dimmable.
- Check for loose wire connections.
- Glass panels are loose:
- Ensure glass panels are properly seated in their grooves and secured by any retaining clips or screws if applicable.
If issues persist after troubleshooting, contact a qualified electrician or Hinkley customer support.
9. Additional Information
For a visual overview of Hinkley's outdoor lighting products and design philosophy, please watch the following video:
Video 9.1: An overview of Hinkley's outdoor lighting, showcasing thoughtful design and quality craftsmanship. This video provides general context for Hinkley products.
10. Warranty and Support
Hinkley products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Hinkley website.
For technical assistance, replacement parts, or any questions regarding your Hinkley Weymouth Large Wall Mount Lantern, please contact Hinkley customer service. Contact information can typically be found on the Hinkley website or on your purchase receipt.
Third-party protection plans may also be available for purchase separately, offering extended coverage beyond the manufacturer's warranty.
