mDesign 20487MDK

mDesign Stackable Storage Containers Box with 2 Pull-Out Drawers

Model: 20487MDK

Introduction

Thank you for choosing the mDesign Stackable Storage Containers Box. This manual provides essential information for the proper setup, operation, and maintenance of your new storage solution. Designed for versatility and convenience, this clear plastic organizer with two pull-out drawers is ideal for decluttering various spaces in your home.

mDesign Stackable Storage Container with two drawers, filled with cookie cutters and cupcake liners.

Image: The mDesign Stackable Storage Container, showcasing its two clear pull-out drawers filled with baking accessories like cookie cutters and cupcake liners, demonstrating its practical use for organizing small kitchen items.

Setup

Your mDesign Stackable Storage Containers Box arrives fully assembled and ready for immediate use. No tools or complex assembly steps are required.

Placement

  • Place the unit on a flat, stable surface such as a kitchen counter, pantry shelf, inside a cabinet, or on a desk.
  • Ensure adequate clearance for the drawers to pull out completely.

Stacking Multiple Units

For enhanced storage capacity, multiple mDesign Stackable Storage Containers Boxes can be securely stacked on top of each other. The design features integrated feet and recessed tops for stable stacking.

Diagram showing how multiple mDesign stackable storage containers can be stacked securely.

Image: An illustration demonstrating the stackable design of the mDesign storage containers. One unit is shown being placed on top of another, and a configuration of four stacked units is also displayed, highlighting the modularity.

Operating

The storage box features two smooth-gliding pull-out drawers for easy access to your stored items.

Using the Drawers

  • Gently pull the integrated handle on the front of each drawer to open.
  • Push the drawer back in until it is fully closed to secure its contents.
A hand pulling out a clear plastic drawer from the mDesign stackable storage unit.

Image: A close-up of a hand demonstrating how to pull out one of the clear plastic drawers from the storage unit, highlighting the ease of access.

Storage Applications

The clear design allows for quick identification of contents, making it suitable for a wide range of items:

  • Kitchen & Pantry: Store spices, tea bags, snack packets, baking supplies, or small utensils.
  • Bathroom: Organize cosmetics, toiletries, cotton balls, or small towels.
  • Office: Keep pens, paper clips, sticky notes, or small office supplies tidy.
  • Craft Room: Sort beads, threads, buttons, or other crafting essentials.
Four images showing the mDesign storage containers used in different home areas: closet, cosmetics, office, and bath.

Image: A collage of four images illustrating the versatile use of the mDesign storage containers in various settings: organizing items in a closet, cosmetics on a vanity, office supplies on a desk, and bath essentials under a sink.

Multiple mDesign stackable storage containers organized on shelves, holding various food items like crackers and snacks.

Image: Several mDesign storage containers arranged neatly on shelves, demonstrating their effectiveness in organizing a pantry with items such as packaged snacks, crackers, and jars.

Maintenance

To ensure the longevity and appearance of your storage containers, follow these simple maintenance guidelines:

  • Cleaning: Wipe the containers with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals, as these can scratch or damage the plastic.
  • Drying: Dry thoroughly with a soft, clean cloth to prevent water spots.
  • Avoid Extreme Temperatures: Do not expose the containers to extreme heat or cold, as this may cause warping or cracking.

Troubleshooting

If you encounter any issues with your storage containers, please refer to the following common solutions:

ProblemPossible CauseSolution
Drawers are difficult to open or close.Debris in the drawer tracks, or uneven weight distribution.Remove drawers and inspect tracks for any obstructions. Clean with a damp cloth. Redistribute contents evenly within the drawer.
Stacked units feel unstable.Units not properly aligned, or placed on an uneven surface.Ensure each unit is perfectly aligned with the one below it. Place the entire stack on a completely flat and stable surface. Avoid stacking too high with heavy items.

Specifications

Detailed product specifications for the mDesign Stackable Storage Containers Box (Model 20487MDK):

Diagram showing the dimensions of the mDesign Stackable Storage Container: 8.58 inches deep, 6 inches wide, and 7.73 inches high.

Image: A technical diagram illustrating the precise dimensions of the mDesign storage container, indicating a depth of 8.58 inches (21.8 cm), a width of 6 inches (15.2 cm), and a height of 7.73 inches (19.6 cm).

FeatureDetail
Model Number20487MDK
ColorClear
MaterialPlastic
Frame MaterialPlastic
Product Dimensions (D x W x H)8.58" x 6" x 7.73" (21.8 cm x 15.2 cm x 19.6 cm)
Number of Drawers2
Item Weight2.05 pounds (0.93 Kilograms)
Assembly RequiredNo
Mounting TypeTabletop
Special FeaturesLightweight, Stackable
UPC192173204870

Warranty and Support

Specific warranty information for this product is not provided in the available data. For details regarding warranty coverage, returns, or any product-related inquiries, please contact mDesign customer service directly or visit their official website.

mDesign Customer Service: Please refer to the contact information provided on the product packaging or the official mDesign website for the most up-to-date support options.

© 2025 mDesign. All rights reserved.

This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.