SONGMICS RYG094B02

SONGMICS Fabric Wardrobe Instruction Manual

Model: RYG094B02 | Brand: SONGMICS

Introduction

Thank you for choosing the SONGMICS Fabric Wardrobe. This manual provides essential information for the safe assembly, proper use, and maintenance of your new wardrobe. Please read these instructions carefully before beginning assembly and retain them for future reference.

SONGMICS Fabric Wardrobe, fully assembled and filled with clothes

Image 1: Fully assembled SONGMICS Fabric Wardrobe, showcasing its storage capacity with clothes on hanging rails and folded items on shelves.

Safety Information

  • Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
  • Assemble the wardrobe on a soft, clean surface to prevent scratches.
  • Do not overload the hanging rails or shelves. The maximum static load per hanging rail is 15 kg (33 lbs).
  • Distribute weight evenly to maintain stability.
  • Keep children away during assembly. Small parts may pose a choking hazard.
  • Attach the anti-tip device to a wall if available, especially in households with children or pets, to prevent accidental tipping.

Package Contents

Before starting assembly, verify that all components listed below are included in your package:

  • Steel bars (16 mm diameter)
  • Reinforced plastic connectors
  • Fabric cover
  • 4 Hanging sections
  • 2-tier shelf
  • 4 Side pockets
  • Anti-tip device
  • Illustrated instructions
Exploded view of SONGMICS Fabric Wardrobe components

Image 2: An exploded diagram showing the fabric cover, steel frame, and connectors that make up the wardrobe.

Setup and Assembly

Assembly of the SONGMICS Fabric Wardrobe is designed to be straightforward and requires no additional tools. Follow these steps:

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
  2. Assemble the Base Frame: Connect the steel bars to the plastic connectors to form the base of the wardrobe. Ensure all connections are secure.
  3. Build Vertical Supports: Attach the vertical steel bars to the base using the plastic connectors, building upwards.
  4. Install Shelves: Slide the fabric shelves onto the designated bars. Ensure they are taut and properly supported.
  5. Attach Hanging Rails: Insert the hanging rails into the appropriate plastic connectors at the top sections.
  6. Complete the Frame: Connect the top horizontal bars to complete the frame structure.
  7. Apply Fabric Cover: Carefully drape the fabric cover over the assembled frame. Ensure it fits snugly.
  8. Secure Cover: Use the integrated fasteners (e.g., hook-and-loop straps or ties) to secure the fabric cover to the frame. Zip up the front panel.
  9. Attach Side Pockets: If applicable, attach the side pockets to the exterior of the fabric cover.
  10. Install Anti-Tip Device: For added safety, secure the anti-tip device to a wall according to the illustrated instructions.
Close-up of 16mm diameter steel barsClose-up of reinforced plastic connector

Image 3: Details of the robust 16mm steel bars and reinforced plastic connectors used in the wardrobe's construction.

Operating Instructions

The SONGMICS Fabric Wardrobe is designed for versatile clothing and accessory storage.

  • Hanging Sections: Utilize the four hanging sections for shirts, coats, dresses, and other garments that benefit from being hung to prevent wrinkles. Each section offers a maximum hanging height of 120 cm (47.2 inches).
  • Shelves: The two-tier shelf provides space for folded clothes, shoes, bags, or storage boxes. Ensure items are placed within the weight limit of 5 kg (11 lbs) per shelf.
  • Side Pockets: Use the four side pockets for smaller items such as socks, ties, belts, keys, or gloves for easy access.
  • Cover Closure: The fabric cover can be zipped closed to protect contents from dust. The front panel can be rolled up and secured with ties for open access.
Close-up of the four side pockets on the fabric wardrobe

Image 4: Detail of the four convenient side pockets, ideal for storing small accessories.

Hanging rail with clothes and fabric cover rolled up and secured

Image 5: The hanging rail in use, with the fabric cover rolled up and secured, showing the zipper detail.

Maintenance and Care

  • Cleaning: Wipe the steel bars with a damp cloth. The fabric cover can be spot cleaned with a mild detergent and air-dried. Do not machine wash or tumble dry the fabric cover.
  • Dust Protection: Keep the fabric cover zipped when not accessing items to protect them from dust.
  • Inspection: Periodically check all connections to ensure they remain secure. Tighten any loose connections if necessary.
  • Avoid Overloading: Adhere to the specified weight limits to prevent damage to the frame and fabric.
  • Placement: Place the wardrobe on a level surface to ensure stability. Avoid direct sunlight or excessive moisture to prolong the life of the fabric.
Close-up of water-resistant fabric material

Image 6: Detail of the fabric material, highlighting its water-resistant properties for easy cleaning.

Troubleshooting

ProblemPossible CauseSolution
Wardrobe is unstable or wobbly.Loose connections or uneven surface.Ensure all steel bars are fully inserted into the plastic connectors. Place the wardrobe on a flat, level surface.
Fabric cover does not fit properly.Incorrect assembly of the frame or cover orientation.Double-check the frame assembly against the instructions. Ensure the cover is oriented correctly before pulling it down.
Hanging rail sags.Overloaded hanging rail.Reduce the weight on the hanging rail. Ensure weight does not exceed 15 kg (33 lbs) per rail.
Zippers are stuck.Fabric caught in zipper or zipper misalignment.Gently pull the fabric away from the zipper path. Apply a small amount of zipper lubricant (e.g., wax) if needed.

Specifications

  • Model Number: RYG094B02
  • Brand: SONGMICS
  • Dimensions (Width x Depth x Height): 170 x 45 x 167 cm (66.9 x 17.7 x 65.7 inches)
  • Material: Steel, Plastic, Non-woven Fabric
  • Color: Black
  • Item Weight: 5 kg (11 lbs)
  • Max. Static Load per Hanging Rail: 15 kg (33 lbs)
  • Max. Static Load per Shelf: 5 kg (11 lbs)
  • Assembly Required: Yes
  • Style: Minimalist
  • UPC: 194343032054

Warranty and Support

SONGMICS products are designed for quality and durability. For warranty information, please refer to the terms and conditions provided at the time of purchase or visit the official SONGMICS website. If you encounter any issues or require assistance, please contact SONGMICS customer support through their official channels or the retailer from whom you purchased the product.

For further assistance, please visit the SONGMICS Brand Store.

© 2025 SONGMICS. All rights reserved.

Related Documents - RYG094B02

Preview How to Install Additional Wardrobe Components | Cabjaks
Detailed installation guide for additional wardrobe components from Cabjaks, covering side panels, hanging rails, adjustable shelves, top panels, and corner supports. Includes tool recommendations and step-by-step instructions for upgrading your wardrobe.
Preview Kelvin Direct Made-to-Order Wardrobe Installation Guide
Comprehensive installation guide for Kelvin Direct's made-to-order wardrobes, covering panel installation, track fitting, and door hanging. Includes necessary tools, safety precautions, and step-by-step instructions.
Preview SONGMICS RYG012/12 Fabric Wardrobe Assembly Instructions and Guide
Detailed assembly instructions and user guide for the SONGMICS RYG012/12 Fabric Wardrobe. Includes parts list, step-by-step diagrams, and safety guidelines.
Preview IKEA PAX and KOMPLEMENT Wardrobe System Guide
A comprehensive guide to designing and customizing your IKEA PAX and KOMPLEMENT wardrobe system, including frame options, door styles, interior organizers, lighting, and assembly services.
Preview SONGMICS RYG094 Fabric Wardrobe Assembly Instructions
Step-by-step guide for assembling the SONGMICS RYG094 fabric wardrobe. This manual details the parts, tools, and assembly process for creating a functional and organized storage solution, including general guidelines and warnings.
Preview Floating Shelves Instruction Manual and Warranty Information
This document provides instructions for installing floating shelves and details the two-year limited warranty provided by the manufacturer. It includes a parts list, step-by-step installation guides, and important safety warnings.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.