Pemberly Row Transitional 36" Utility Storage Cabinet Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Pemberly Row Transitional 36" Utility Storage Cabinet. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The Pemberly Row 36" Utility Storage Cabinet is designed to provide additional storage in various rooms, featuring five shelves (three adjustable) and a durable laminated particleboard construction in a Dove Gray finish.

Important Safety Information

• Wall Anchor Kit: A wall anchor kit is included with your cabinet. It is essential to install this kit to prevent tipping injuries, especially in households with children or pets. Follow the wall anchoring instructions carefully.
• Assembly: Two adults are recommended for safe and efficient assembly.
• Weight Capacity: Each shelf is designed to hold up to 35 lbs. Do not exceed this weight limit to prevent damage or injury. The overall weight limit for the cabinet is 200 pounds.
• Placement: Ensure the cabinet is placed on a level surface. Adjustable feet are provided to assist with leveling on uneven floors.
• Moving the Cabinet: When moving the assembled cabinet, empty it first and lift it carefully to avoid structural damage.

Parts List

Before beginning assembly, verify that all components and hardware are present. If any parts are missing or damaged, contact customer support.

• Side Panels (2)
• Top Panel (1)
• Bottom Panel (1)
• Back Panels (2-3, depending on design)
• Fixed Shelves (2)
• Adjustable Shelves (3)
• Doors (2)
• Door Handles (2)
• Adjustable Feet (4)
• Hinges and Mounting Hardware
• Wall Anchor Kit (straps, screws, anchors)
• Various Screws, Dowels, and Cam Locks

Note: Specific part identifiers and quantities will be detailed in the included assembly diagram.

Assembly Instructions

Please follow these steps carefully. It is recommended to assemble the cabinet in the room where it will be used to avoid moving it unnecessarily after assembly.

Tools Required:

• Phillips Head Screwdriver
• Hammer (for dowels and back panel nails)
• Drill (for wall anchor installation)
• Level

Step-by-Step Assembly:

1. Unpack and Identify: Carefully unpack all components and lay them out on a clean, soft surface (e.g., carpet or blanket) to prevent scratches. Identify each part using the provided parts list and diagrams.
2. Attach Adjustable Feet: Secure the adjustable feet to the bottom panel of the cabinet using the provided screws.
3. Assemble Base Frame: Connect the side panels to the bottom panel using dowels and cam locks/screws as indicated in the diagram. Ensure connections are secure.
4. Install Fixed Shelves: Insert the fixed shelves into the designated slots or attach them with screws/dowels. These shelves provide structural integrity.
5. Attach Top Panel: Secure the top panel to the side panels using the appropriate hardware.
6. Install Back Panels: Slide or nail the back panels into the grooves on the rear of the cabinet. Ensure they are flush and secure.
7. Attach Hinges to Doors: Mount the hinges to the cabinet doors according to the instructions.
8. Mount Doors to Cabinet: Carefully attach the doors to the cabinet frame using the pre-drilled holes for the hinges. Adjust hinges as necessary to ensure proper door alignment and closure.
9. Install Door Handles: Attach the door handles to the front of the doors.
10. Install Adjustable Shelves: Place the shelf pins into the desired holes for the adjustable shelves. Insert the adjustable shelves onto the pins.
11. Wall Anchoring: Position the assembled cabinet in its final location. Using the provided wall anchor kit, secure the cabinet to a wall stud or use appropriate wall anchors for your wall type. This step is critical for safety.

Image: The Pemberly Row Utility Storage Cabinet shown in a laundry room, demonstrating its potential placement and size relative to other appliances.

Image: A diagram illustrating the dimensions of the cabinet: 74.31 inches high, 35.68 inches wide, and 15.38 inches deep.

Operating Instructions

• Opening/Closing Doors: Use the installed handles to gently open and close the cabinet doors. Avoid forcing the doors.
• Adjusting Shelves: To adjust the height of the three adjustable shelves, remove all items from the shelf. Carefully lift the shelf and remove the four shelf pins. Reinsert the pins into the desired holes at the new height, ensuring they are level, then place the shelf back onto the pins.
• Loading the Cabinet: Distribute weight evenly across the shelves. Place heavier items on lower shelves to maintain stability. Do not exceed the 35 lbs weight limit per shelf or the 200 lbs total weight limit for the cabinet.

Image: An interior view of the cabinet with one door open, showing various items like dishes, pots, and spices stored on the shelves, demonstrating its storage capacity.

Care and Maintenance

• Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the laminated finish.
• Spills: Clean up spills immediately to prevent moisture damage to the particleboard.
• Hardware Check: Periodically check all screws, cam locks, and other hardware to ensure they remain tight. Retighten if necessary.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the finish.

Troubleshooting

Product Specifications

• Brand: Pemberly Row
• Model Name: Transitional 36" Utility Storage Cabinet
• Model Number: PR-4753-2216359
• Color: Dove Gray
• Product Dimensions (D x W x H): 15.38" x 35.68" x 74.31"
• Item Weight: 136 Pounds
• Material: Engineered Wood (Laminated Particleboard)
• Number of Shelves: 5 (3 adjustable)
• Weight Limit per Shelf: 35 Pounds
• Overall Weight Limit: 200 Pounds
• Mounting Type: Freestanding (Wall anchor kit included for safety)
• Assembly Required: Yes
• UPC: 195493307443

Warranty and Support

Pemberly Row warrants this product to be free from defects and agrees to remedy any such defect. This warranty covers one year from the date of original purchase.

For warranty claims, missing parts, or technical assistance, please contact Pemberly Row customer support. Refer to your purchase documentation for specific contact details or visit the official Pemberly Row website.

Manufacturer: Pemberly Row