Addtam AD84C Surge Protector Power Strip User Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your Addtam AD84C Surge Protector Power Strip. Please read these instructions carefully before operation and retain them for future reference.

The Addtam AD84C is designed to provide expanded power access and surge protection for your electronic devices, featuring multiple AC outlets and USB charging ports in a compact, mountable design.

2. Safety Information

WARNING: To reduce the risk of electric shock or fire, observe the following safety precautions:

• Do not exceed the electrical ratings of the surge protector.
• Do not use in wet environments or near water.
• Do not disassemble or modify the device.
• Keep children away from the surge protector and connected devices.
• Ensure the plug is fully inserted into the wall outlet.
• Do not use with extension cords or adapters that are not properly grounded.
• If the surge protector is damaged, discontinue use immediately.

3. Product Features

• 12-in-1 Power Solution: Equipped with 8 standard AC outlets and 4 USB charging ports (3 USB-A, 1 USB-C) to power up to 12 devices simultaneously.
• USB Charging: USB-C port delivers up to 3A Max, while USB-A ports provide up to 2.4A Max, compatible with a wide range of USB-powered devices.
• Wide-Spaced Outlets: Three-sided design with 2-inch spacing between AC outlets accommodates larger power adapters without blocking adjacent ports.
• Compact Design: Measuring approximately 5.2 x 3.7 x 1.2 inches, its compact size is ideal for home, office, or dorm use, saving valuable space.
• Advanced Surge Protection: Features 3 complementary surge protection circuits (TVS MOV GDT) with a minimum energy-absorbing capacity of 1080 Joules.
• Overload Protection: An integrated ON/OFF switch automatically shuts off power to protect your devices from over-voltage, over-current, over-charge, and short-circuiting.
• 5ft Flat Plug Extension Cord: Includes a durable 5-foot braided extension cord with a low-profile, angled flat plug that fits easily in tight spaces and prevents blocking other outlets.
• Easy Mountable Design: Designed with screw fixation points on both ends for convenient wall or desk mounting.

Figure 1: Addtam AD84C Surge Protector Power Strip, showing its compact design, multiple outlets, and braided cord.

4. Setup

4.1 Connecting to Power

1. Uncoil the 5ft braided extension cord.
2. Plug the low-profile flat plug into a standard 125V AC wall outlet. The angled design allows for use in tight spaces without obstructing other outlets.
3. Ensure the "SURGE PROTECTED" LED indicator on the power strip illuminates green, indicating active surge protection.

Figure 2: The low-profile, angled flat plug designed for tight spaces.

4.2 Mounting the Power Strip (Optional)

The Addtam AD84C can be securely mounted to a wall or desk surface using its integrated screw fixation design.

1. Identify a suitable mounting location.
2. Mark the positions for the two keyhole slots on the back of the power strip.
3. Install two screws (not included) into the marked positions, leaving a small portion of the screw head protruding.
4. Align the keyhole slots on the back of the power strip with the installed screws and slide the power strip downwards to secure it.

Figure 3: Keyhole slots on the back of the power strip for easy mounting.

5. Operating Instructions

5.1 Connecting Devices

The power strip features 8 AC outlets and 4 USB ports (3 USB-A, 1 USB-C) distributed across three sides for optimal space utilization.

• AC Outlets: Plug your electronic devices directly into any of the 8 widely spaced AC outlets. The 2-inch spacing accommodates larger power adapters.
• USB-A Ports: Connect your USB-A compatible devices (e.g., smartphones, tablets, smartwatches) to the 3 USB-A ports for charging at up to 2.4A Max.
• USB-C Port: Connect your USB-C compatible devices for faster charging at up to 3A Max.

Figure 4: The power strip in use, demonstrating its capacity to power multiple devices simultaneously.

Figure 5: Detailed view of the USB-A and USB-C charging ports and their respective maximum outputs.

5.2 Using the ON/OFF Switch

The power strip includes an ON/OFF switch that also functions as an overload protector.

• To turn on power to all connected devices, press the switch to the "ON" position. The "SURGE PROTECTED" LED will light up green.
• To turn off power to all connected devices, press the switch to the "OFF" position. The "SURGE PROTECTED" LED will turn off.
• In case of an overload, the switch will automatically trip to the "OFF" position to protect your devices. If this occurs, unplug some devices, then reset the switch to "ON".

Figure 6: The ON/OFF switch and the green LED indicator for surge protection status.

6. Maintenance

• Keep the power strip clean and free from dust and debris.
• Do not expose the power strip to extreme temperatures or direct sunlight.
• Regularly inspect the cord and plug for any signs of damage.
• Unplug the power strip from the wall outlet when not in use for extended periods.

7. Troubleshooting

• No Power to Devices:
  • Ensure the power strip's plug is fully inserted into the wall outlet.
  • Check if the ON/OFF switch is in the "ON" position and the "SURGE PROTECTED" LED is lit.
  • If the switch has tripped, it indicates an overload. Unplug some devices and reset the switch.
  • Verify that the wall outlet itself is functioning by plugging in another device.
• USB Ports Not Charging:
  • Ensure the device is properly connected to the USB port.
  • Check if the device's charging cable is functional.
  • Some devices may require specific charging currents; ensure compatibility.
• "SURGE PROTECTED" LED is Off:
  • If the LED is off, it may indicate that the surge protection components have been consumed, or the power strip is not receiving power. While the power strip may still function as an extension cord, it no longer provides surge protection. Consider replacing the unit.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please contact Addtam customer service through the retailer where the product was purchased or visit the official Addtam website.

Keep your purchase receipt as proof of purchase for warranty claims.